Efficient synthesis of p-bis-(chlorodifluoromethyl)benzene

Selective, high yield partial fluorination of p-bis-(trichloromethyl)benzene to p-bis-(chlorodifluoromethyl)benzene has been accomplished by warming a slurry of the p-bis-(trichloromethyl)benzene in anhydrous HF which also contains a small quantity of inert solvent, such as 1,2-dichloroethane.     

Partition and binding constants in micelles and vesicles from fluorescence quenching data

A method of analysing steady-state fluorescence quenching in compartmentalized systems is proposed which allows the evaluation of partition and binding constants where both association processes occur simultaneosly. The number of binding sites is shown to be dependent on the nature of the quencher.     

Solubility of carbazole in binary chloroalkane + dibutyl ether solvent mixtures

Solubilities are reported for carbazole in three binary chloroalkane + dibutyl ether solvent mixtures at 25°C. Results of these measurements are compared with solution models developed for solubility in systems containing specific solute-solvent interactions. A simple model based on a single 1:1 carbazole:dibutyl ether complex described the solubility data, though the calculated equilibrium constant was about one-half of values published previously. A more sophisticated solution model, which assumes both carbazole:dibutyl ether and carbazole:chloroalkane complexes, was needed to thermodynamically describe the systems studied. Equilibrium constants for three presumed carbazole:chloroalkane complexes are calculated from measured carbazole solubilities.     

One-carbon chain extension of esters to alpha-chloroketones: a safer route without diazomethane

The reaction of a variety of methyl esters with dimethylsulfoxonium methylide at 0-25 degrees C affords the chain-extended beta-keto dimethylsulfoxonium ylides. Subsequent treatment with hydrogen chloride in THF proceeds with loss of DMSO to afford the corresponding alpha-chloroketones. This sequence has been utilized to convert the methyl esters of CBZ-protected alanine and valine to the anti N-protected alpha-amino epoxides, which are important pharmaceutical intermediates. When the same protocol is applied to BOC-protected phenylalanine methyl ester, epimerization occurs so that the use of a more reactive aryl ester is required. This chemistry provides a practical route to alpha-chloroketones that avoids the use of toxic and explosive diazomethane.     

Surface enrichment of proteins at quartz/water interfaces: a neutron reflectivity study

Neutron reflectivity (NR) was used to study the adsorption of human serum albumin and human fibrinogen on quartz. The proteins were individually and sequentially adsorbed from heavy water and heavy water/methanol mixtures at pH 4 and 7.0. The technique allows for the subnanometer resolution of the adsorbed layer thickness and gross morphology. Under the conditions of our measurements we found that fibrinogen formed a distinct layer that we interpret as a mat of the protein three layers thick whereas albumin formed only diffuse layers. The adsorption pattern of the two proteins changed radically when one protein was adsorbed on top of the other (previously adsorbed). In general our measurements indicate that the adsorbed protein layers on quartz are rather loosely bound and that these layers, incorporating as much as 80% water, extend further into the bulk fluid than might have been expected.     

Obtusin,a unique bromine-containing polycyclic ketal from the red marine alga Laurenciaobtusa

The structure of a unique bromine-containing ketal, obtusin ($\text{1}$), has been determined by spectral and X-ray crystallographic techniques. Obtusin is a natural component of the Mediteranean red alga $\text{Laurencia}$$\text{obtusa}$.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

Synthesis and NMR studies of (13)C-labeled vitamin D metabolites

Isotope-labeled drug molecules may be useful for probing by NMR spectroscopy the conformation of ligand associated with biological hosts such as membranes and proteins. Triple-labeled [7,9,19-(13)C(3)]-vitamin D(3) (56), its 25-hydroxylated and 1 alpha,25-dihydroxylated metabolites (58 and 68, respectively), and other labeled materials have been synthesized via coupling of [9-(13)C]-Grundmann's ketone 39 or its protected 25-hydroxy derivative 43 with labeled A ring enyne fragments 25 or 26. The labeled CD-ring fragment 39 was prepared by a sequence involving Grignard addition of [(13)C]-methylmagnesium iodide to Grundmann's enone 28, oxidative cleavage, functional group modifications leading to seco-iodide 38, and finally a kinetic enolate S(N)2 cycloalkylation. The C-7,19 double labeling of the A-ring enyne was achieved by the Corey-Fuchs/Wittig processes on keto aldehyde 11. By employing these labeled fragments in the Wilson-Mazur route, the C-7,9,19 triple-(13)C-labeled metabolites 56, 58, and 68 as well as other (13)C-labeled metabolites have been prepared. In an initial NMR investigation of one of the labeled metabolites prepared in this study, namely [7,9,19-(13)C(3)]-25-hydroxyvitamin D(3) (58), the three (13)C-labeled carbons of the otherwise water insoluble steroid could be clearly detected by (13)C NMR analysis at 0.1 mM in a mixture of CD(3)OD/D(2)O (60/40) or in aqueous dimethylcyclodextrin solution and at 2 mM in 20 mM sodium dodecyl sulfate (SDS) aqueous micellar solution. In the SDS micellar solution, a double half-filter NOESY experiment revealed that the distance between the H(19Z) and H(7) protons is significantly shorter than that of the corresponding distance calculated from the solid state (X-ray) structure of the free ligand. The NMR data in micelles reveals that 58 exists essentially completely in the alpha-conformer with the 3 beta-hydroxyl equatorially oriented, just as in the solid state. The shortened distance (H(19Z))-H(7)) in micellar solutions as compared to that in the solid state is most easily rationalized on the basis that the 5(10)-torsion angle in 58 is decreased in micellar solutions as compared to that in the solid state.     

The foam analogy: from phases to elasticity

By mapping the interactions of colloidal particles onto the problem of minimizing areas, the physics of foams can be used to understand the phase diagrams of both charged and fuzzy colloids. We extend this analogy to study the elastic properties of such colloidal crystals and consider the face-centered cubic, body-centered cubic and A15 lattices. We discuss two types of soft interparticle potentials corresponding to charged and fuzzy colloids, respectively, and we analyze the dependence of the elastic constants on density as well as on the parameters of the potential. We show that the bulk moduli of the three lattices are generally quite similar, and that the shear moduli of the two non-close-packed lattices are considerably smaller than in the face-centered cubic lattice. We find that in charged colloids, the elastic constants are the largest at a finite screening length, and we discuss a shear instability of the A15 lattice.     

Iminophosphines: synthesis, formation of 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and N-(pyridin-2-yl)-2-diphenylphosphinoylaniline, coordination chemistry and applications in platinum group catalyzed Suzuki coupling reactions and hydrosilylations

The aprotic and protic bi- and multidentate iminophosphines 2-Ph₂PC₆H₄N=CR¹R² (R¹=H, R²=Ph=2a; R¹=Me R²=Ph=2b; R¹=H, R²=2-thienyl=2c; R¹=H, R²=C₆H₄-2-PPh₂=2d; R¹=H, R²=C₆H₄-2-OH=2e, R¹=H, R²=C₆H₄-2-OH-3-Bu^t=2f; R¹=H, R²=CH₂C(O)Me=2g) have been prepared by the acid catalyzed condensation of 2-(diphenylphosphino)aniline with the corresponding aldehyde–ketone. Iminophosphine 2d can be reduced with sodium cyanoborohydride to give the corresponding amino-diphosphine 2-Ph₂PC₆H₄N(H)CH₂C₆H₄-2-PPh₂ (2h). In the presence of a stoichiometric quantity of acid, 2-(diphenylphosphino)aniline reacts in an unexpected manner with benzaldehyde, salicylaldehyde, or acetophenone to give the corresponding 2,3-dihydro-1H-benzo[1,3]azaphosphol-3-ium salts and with pyridine-2-carboxaldehyde to give N-(pyridin-2-ylmethyl)-2-diphenylphosphinoylaniline, the latter of which has been characterized by single-crystal X-ray crystallography, as its palladium dichloride derivative. The attempted condensation of 2-(diphenylphosphino)aniline with pyridine-2-carboxaldehyde to give the corresponding pyridine-functionalized iminophosphine resulted in an unusual transformation involving the diastereoselective addition of two equivalents of aldehyde to give 1,2-dipyridin-2-yl-2-(o-diphenylphosphinoyl)phenylamino-ethanol, which has been characterized by a single-crystal X-ray structure determination. The bidentate iminophosphine 2-Ph₂PC₆H₄N=C(H)Ph reacts with [(cycloocta-1,5-diene)PdClX] X=Cl, Me) to give [Pd{2-Ph₂PC₆H₄N=C(H)Ph}ClX] and the imino-diphosphine 2-Ph₂PC₆H₄N=C(H)C₆H₄-PPh₂ reacts with [(cycloocta-1,5-diene)PdClMe] to give [Pd{2-Ph₂PC₆H₄N=C(H)C₆H₄---PPh₂}ClMe] and each has been characterized by single-crystal X-ray crystallography. The monobasic iminophosphine 2-Ph₂PC₆H₄N=C(Me)CH₂C(O)Me reacts with [Ni(PPh₃)₂Cl₂] in the presence of NaH to give the phosphino–ketoiminate complex [Ni{2-Ph₂PC₆H₄N=C(Me)CHC(O)Me}Cl], which has been structurally characterized. Mixtures of iminophosphines 2a–h and a palladium source catalyze the Suzuki cross coupling of 4-bromoacetophenone with phenyl boronic acid. The efficiency of these catalysts show a marked dependence on the palladium source, catalysts formed from [Pd₂(OAc)₆] giving consistently higher conversions than those formed from [Pd₂(dba)₃] and [PdCl₂(MeCN)₂]. Catalysts formed from neutral bi- and terdentate iminophosphines 2a–d gave significantly higher conversions than those formed from their monobasic counterparts 2e–f. Notably, under our conditions the conversions obtained with 2a–c compare favorably with those of the standards; catalysts formed from tris(2-tolyl)phosphine and tris(2,4-di-tert-butylphenyl)phosphite and a source of palladium. In addition, mixtures of [Ir(COD)Cl]₂ and 2a–h are active for the hydrosilylation of acetophenone; in this case catalysts formed from monobasic iminophosphines 2e–f giving the highest conversions.