Solid-state NMR evidence for a protonation switch in the binding pocket of the H1 receptor upon binding of the agonist histamine

G protein coupled receptors (GPCRs) represent a major superfamily of transmembrane receptor proteins that are crucial in cellular signaling and are major pharmacological targets. While the activity of GPCRs can be modulated by agonist binding, the mechanisms that link agonist binding to G protein coupling are poorly understood. Here we present a method to accurately examine the activity of ligands in their bound state, even at low affinity, by solid-state NMR dipolar correlation spectroscopy and confront this method with the human H1 receptor. The analysis reveals two different charge states of the bound agonist, dicationic with a charged imidazole ring and monocationic with a neutral imidazole ring, with the same overall conformation. The combination of charge difference and pronounced heterogeneity agrees with converging evidence that the active and inactive states of the GPCR represent a dynamic equilibrium of substates and that proton transfer between agonist and protein side chains can shift this equilibrium by stabilizing the active receptor population relative to the inactive one. In fact, the data suggest a global functional analogy between H1 receptor activation and the meta I/meta II charge/discharge equilibrium in rhodopsin (GPCR). This corroborates current ideas on unifying principles in GPCR structure and function.     

Effect of broadband-noise masking on the behavioral response of a harbor porpoise (Phocoena phocoena) to 1-s duration 6-7 kHz sonar up-sweeps

Naval sonar systems produce signals which may affect the behavior of harbor porpoises, though their effect may be reduced by ambient noise. To show how natural ambient noise influences the effect of sonar sweeps on porpoises, a porpoise in a pool was exposed to 1-s duration up-sweeps, similar in frequency range (6-7 kHz) to those of existing naval sonar systems. The sweep signals had randomly generated sweep intervals of 3-7 s (duty cycle: 19%). Behavioral parameters during exposure to signals were compared to those during baseline periods. The sessions were conducted under five background noise conditions: the local normal ambient noise and four conditions mimicking the spectra for wind-generated noise at Sea States 2-8. In all conditions, the sweeps caused the porpoise to swim further away from the transducer, surface more often, swim faster, and breathe more forcefully than during the baseline periods. However, the higher the background noise level, the smaller the effects of the sweeps on the surfacing behavior of the porpoise. Therefore, the effects of naval sonar systems on harbor porpoises are determined not only by the received level of the signals and the hearing sensitivity of the animals but also by the background noise.     

Imaging surface plasmon resonance for multiplex microassay sensing of mycotoxins

A prototype imaging surface plasmon resonance-based multiplex microimmunoassay for mycotoxins is described. A microarray of mycotoxin–protein conjugates was fabricated using a continuous flow microspotter device. A competitive inhibition immunoassay format was developed for the simultaneous detection of deoxynivalenol (DON) and zearalenone (ZEN), using a single sensor chip. Initial in-house validation showed limits of detection of 21 and 17 ng/mL for DON and 16 and 10 ng/mL for ZEN in extracts, which corresponds to 84 and 68 μg/kg for DON and 64 and 40 μg/kg for ZEN in maize and wheat samples, respectively. Finally, the results were critically compared with data obtained from liquid chromatography-mass spectrometry confirmatory analysis method and found to be in good agreement. The described multiplex immunoassay for the rapid screening of several mycotoxins meets European Union regulatory limits and represents a robust platform for mycotoxin analysis in food and feed samples.     

Calix[4]arenes as molecules for second order nonlinear optics

Abstract

The synthesis of a novel class of molecules for second order nonlinear optics, i.e. calix[4]arenes with extended π-systems, is described. These compounds are obtained via Wittig-Horner reactions of the formylated calix[4]arenes 5 and 6 to give the stilbene derivatives 7–9, or by diazotization of calix[4]arene, 1, followed by alkylation to give the phenylazocalix[4]arenes 11 and 12. The molecular second order nonlinear optical properties (β_z) of these calix[4]arenes have been measured by electric field-induced second harmonic generation. The influence of different acceptors as well as the influence of the different conformations of the calix[4]arenes on β_z values were determined. Surprisingly, the wavelength of the charge-transfer band λ_max is lower when β_z increases upon increasing the number of acceptors.     

Colour-encoded paramagnetic microbead-based direct inhibition triplex flow cytometric immunoassay for ochratoxin A, fumonisins and zearalenone in cereals and cereal-based feed

A combined (triplex) immunoassay for the simultaneous detection of three mycotoxins in grains was developed with superparamagnetic colour-encoded microbeads, in combination with two bead-dedicated flow cytometers. Monoclonal antibodies were coupled to the beads, and the amounts of bound mycotoxins were inversely related to the amounts of bound fluorescent labelled mycotoxins (inhibition immunoassay format). The selected monoclonal antibodies were tested for their target mycotoxins and for cross-reactivity with relevant metabolites and masked mycotoxins. In the triplex format, low levels of cross-interactions between the assays occurred at irrelevant high levels only. All three assays were influenced by the sample matrix of cereal extracts to some extent, and matrix-matched calibrations are recommended for quantitative screening purposes. In a preliminary in-house validation, the triplex assay was found to be reproducible, sensitive and sufficiently accurate for the quantitative screening at ML level. The triplex assay was critically compared to liquid chromatography–tandem mass spectrometry using reference materials and fortified blank material. Results for the quantification of ochratoxin A and zearalenone were in good agreement. However, the fumonisin assay was, due to overestimation, only suitable for qualitative judgements. Both flow cytometer platforms (Luminex 100 and FLEXMAP 3D) performed similar with respect to sensitivity with the advantages of a higher sample throughput and response range of the FLEXMAP 3D and lower cost of the Luminex 100.

In-situ synthesis of a palladium-polyaniline hybrid catalyst for a Suzuki coupling reaction

Palladium-catalyzed cross-coupling reactions are one of the most frequently used synthetic tools for the construction of new carbon-carbon bonds in organic synthesis. The present study describes the use of palladium-polyaniline composite material as a catalyst for the Suzuki coupling of aryl halides. Palladium-polyaniline nanocomposite material was synthesized using an in-situ technique in which palladium acetate and aniline hydrochloride were used as the precursors of the composite. Electron microscopy imaging showed that the palladium particles were well-dispersed within the polymer matrix and were typically 3-5 nm in diameter. The metal-polymer composite material was used as a catalyst for the coupling of phenylboronic acid with aryl halides in the presence of an inorganic base and showed excellent yield with high TOF values.     

Influence of cationic composition and pH on the formation of metal stearates at oil-water interfaces

We study the formation of layers of metal stearates at the interface between a decane solution of stearic acid and aqueous salt solutions of variable composition and pH by monitoring the evolution of their mechanical, optical, and chemical properties as a function of time after formation of the interface. For values of the pH below the pK(a) of stearic acid hardly any interfacial activity is observed. For pH > pK(a), stearic acid deprotonates at the interface and forms metal stearates, eventually leading to the formation of macroscopic solid layers. Dynamic interfacial tension measurements reveal that the process takes place in several stages, which we attribute to the successive formation of dilute and dense monolayers followed by three-dimensional growth. In the presence of divalent ions, the solid layers display a significant increase in the dilatational storage modulus. Experiments performed with an aqueous phase containing multiple cation species (artificial seawater) give rise to particularly pronounced growth of solid layers, which preferentially incorporate Ca(2+) as revealed by X-ray photoelectron and infrared spectroscopy. Our results highlight in particular the importance of the complex synergistic effects of simultaneously present monovalent and divalent cation species on the interfacial adsorption.     

Coating systems for infra structural works

“Rijkswaterstaat” is a government organisation responsible for the construction, operation and maintenance of a large number of structures. The organisation consist of a general engineering division and a number of regional offices responsible for the Rijkswaterstaat objects in their particular region. Rijkswaterstaat spends between 40 to 50 K€ per year on coating and coating related activities. When the steel structures of the Eastern Scheldt barrier (± 200,000 m² of steel) were coated in the mid eighties the applied high solid epoxy system developed extensive cracking. This resulted in numerous locations with pit corrosion. Investigations were carried out and it was concluded that the cracking of this specific high-solids epoxy system was caused by restrained shrinkage. This resulted in the build up of high internal mechanical stresses in the coating system. Problems with stress build up were also encountered on other projects, although less severe and mainly concentrated at edges and welded joints. To prevent future problems, RWS has taken a number of initiatives such as the developed a procedure for the selection of coating systems. This selection procedure has proven to be useful for RWS in selecting coating systems for use on infra structural works. The basic principle of the selection procedure of the RWS selection procedure is different from most other procedures. The RWS selection procedure uses the object to be coated as a starting point instead of the coating system. This is done by first evaluating all relevant aspects of the object which may influence the selection of a system. These aspects are then translated into so called “Functional requirements”. Coating systems with properties that are in compliance with the performance requirements are gathered and through comparison of requirements and properties a selection is made. The objects that, until now, have been coated with systems selected with the selection procedure have performed adequately. Systems that have been selected with the procedure to replace or repair those that have developed cracking have until now not shown any new problems. At the present time more and more alternative tests and test procedures become available, most of them derived from ISO 12944. These will be studied closely and compared with the currently used methods on the level of functional requirements. RWS is already actively involved in the search for alternative test methods and will remain to do so in the future. In view of this the Rijkswaterstaat selection procedure will remain in function.     

Novel low‐loss waveguide delay lines using Vernier ring resonators for on‐chip multi‐λ microwave photonic signal processors

In this paper, novel photonic delay lines (DLs) using Vernier/non‐identical ring resonators (VRRs) are proposed and demonstrated, which are capable of simultaneous generation of multiple different delays at different wavelengths (frequencies). The simple device architectures and full reconfigurability allow the DLs to be integrated with other functional building blocks in photonic integrated circuits to realize on‐chip, complex multi‐λ microwave photonic signal processors with reduced system complexity. To prove the concept, DLs using VRRs in cascaded and coupled configurations have been fabricated in TriPleX^TM waveguide technology, which enables a very low delay‐induced loss of approximately 0.18 dB/100 ps. The fabricated DLs demonstrated simultaneous generation of four incremental delays, where a maximum incremental step of 550 ps and a corresponding top delay of 1650 ps were measured for a bandwidth up to 1 GHz. To our knowledge, this is the first report on VRRs for delay generation functionalities.