A combined transient and steady state approach for robust lifetime spectroscopy with micrometer resolution

We present the combination of two complementary micro‐photoluminescence spectroscopic techniques operating in transient and steady state condition, respectively. Introducing the time domain into the well‐established micro‐photoluminescence mapping approach operating under steady state conditions demonstrates a distinct improvement of the robustness and reliability in the determination of charge carrier lifetime measured with micrometer spatial resolution. Lifetimes from 50 ns to above ms are accessible. We elaborate a calibration procedure and apply the combined all‐photoluminescence setup to high‐performance multicrystalline silicon. A lifetime image obtained from the established photoluminescence imaging technique is reconstructed from the microscopic map by considering lateral diffusion and optical blurring, revealing a more detrimental influence of small angle grain boundaries as well as a higher lifetime within grains as may be deduced from the standard imaging technique. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Phase Transition of [2,2]‐Paracyclophane – An End to an Apparently Endless Story

In this contribution, the solid‐state low‐temperature phase structure of [2,2]‐paracyclophane is unambiguously characterised by single‐crystal X‐ray analysis. Additionally, a heat capacity measurement was undertaken, which proves the existence of a λ‐type phase transition at 45 K, a transition that is connected with the formation of a secondary C_p/T feature at 60 K. The low‐temperature phase (<45 K) crystallises in the lower symmetry space group P$\bar 4$ n2, whereas the high‐temperature phase (>60 K) crystallises in space group P4₂/mnm. This proves what has been postulated both by experimental and theoretical chemists but has repeatedly been dismissed as speculation many times.     

Polyanionic Frameworks in the Lithium Phosphidogermanates Li2GeP2 and LiGe3P3 – Synthesis,Structure, and Lithium Ion Mobility

Recently fast lithium ion conductors were discovered in compounds containing tetrahedral SiP₄^8– and GeP₄^8– units. In the context of material development for all solid state batteries the ternary Li/Ge/P phase system has been further investigated and two new lithium phosphidogermanates were discovered on the lithium poor side of the ternary composition diagram. Li₂GeP₂ crystallizes in space group I4₁/acd with unit cell parameters of a = 12.3069(1) Å and c = 19.0306(4) Å, consists of a framework of Ge₄P₁₀ supratetrahedra, and exhibits an ionic conductivity of 1.5(3)×10^–7 S · cm^–1 at 27 °C. LiGe₃P₃ crystallizes in Pbam with a = 9.8459(5) Å, b = 15.7489(7) Å, and c = 3.5995(2) Å. In LiGe₃P₃ Ge and P atoms form a two dimensional polyanion. The slabs consist of five- and six-membered heteroatomic rings comprising GeP₄ and Ge(P₃Ge) tetrahedra including homoatomic Ge–Ge bonds. A semiconducting behavior with an electronic conductivity of ∼10^–4 S · cm^–1 and a remarkable stability vs. air and moisture is observed.     

Control of Intrachain Morphology in the Formation of Polyfluorene Aggregates on the Single-Molecule Level

Controlling the morphology of π-conjugated polymers for organic optoelectronic devices has long been a goal in the field of materials science. Since the morphology of a polymer chain is closely intertwined with its photophysical properties, it is desirable to be able to change the arrangement of the polymers at will. We investigate the π-conjugated polymer poly(9,9-dioctylfluorene) (PFO), which can exist in three distinctly different structural phases: the α-, β-, and γ-phase. Every phase has a different chain structure and a unique photoluminescence (PL) spectrum. Due to its unique properties and the pronounced spectral structure-property relations, PFO can be used as a model system to study the morphology of π-conjugated polymers. To avoid ensemble averaging, we examine the PL spectrum of single PFO chains embedded in a non-fluorescent matrix. With single-molecule spectroscopy the structural phase of every single chain can be determined, and changes can be monitored very easily. To manipulate the morphology, solvent vapor annealing (SVA) was applied, which leads to a diffusion of the polymer chains in the matrix. The β- and γ-phases appear during the self-assembly of single α-phase PFO chains into mesoscopic aggregates. The extent of β- and γ-phase formation is directed by the solvent-swelling protocol used for aggregation. Aggregation unequivocally promotes formation of the more planar β- and γ-phases. Once these lower-energy more ordered structural phases are formed, SVA cannot return the polymer chain to the less ordered phase by aggregate swelling.     

Structure and properties of Na-magadiite dependent on temperature

The mechanism of the thermal behaviour of Na-magadiite at a temperature range from 293–573 K was developed based on X-ray diffraction, DTA, DTL, Q-TG, and gravimetric measurements. A structure model (BRANDT et al.) previously proposed was additionally used. It is possible to show that there probably is a connection between the typical modifications of basal spacing and significant shiftings of silicate sheets. Different steps of dehydration, decrystallization and structure variations can be ascribed to the several thermal transitions. The results depend on sample treatment such as the existent or not existent solid-water vapour interaction and the establishment of equilibrium. It seems that there is a predominance of the first mentioned influence.     

Current status of biodiesel development in Brazil

In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources.     

Polymer brushes via surface-initiated polymerizations

Polymer brushes produced by controlled surface-initiated polymerization provide a route to surfaces coated with well-defined thin polymer films that are covalently bound to the substrate. All of the major controlled polymerization techniques have been applied to the synthesis of polymer brushes and examples of each are presented here. Many examples of brush synthesis in the literature have used the living atom transfer radical polymerization (ATRP) system, and in this tutorial review a particular focus is given to examples of this technique.