Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).     

Average local electrostatic potential and the core-valency separation in atoms

The average local electrostatic potential function, V(r)/ ρ(r), is calculated for 87 atoms, Li-Ac, in the ground state using the nonrelativistic average-over-configuration numerical Hartree-Fock density. It is found empirically that in a given atom the shell boundaries are expressed as the successively increasing maxima in V(r)/ ρ(r) and the outermost maximum presents good approximate estimates of the core-valence separation in atoms. The likeness in behavior of V(r)/ ρ(r) at each shell boundary with the maximum hardness principle is discussed. The single-exponent-fit parameters for the electron density in the valency region are provided for all atoms. © 1995 John Wiley & Sons, Inc.     

Influence of nanoparticle surface functionalization on the thermal stability of colloidal polystyrene films

The installation of large scale colloidal nanoparticle thin films is of great interest in sensor technology or data storage. Often, such devices are operated at elevated temperatures. In the present study, we investigate the effect of heat treatment on the structure of colloidal thin films of polystyrene (PS) nanoparticles in situ by using the combination of grazing incidence small-angle X-ray scattering (GISAXS) and optical ellipsometry. In addition, the samples are investigated with optical microscopy, atomic force microscopy (AFM), and field emission scanning electron microscopy (FESEM). To install large scale coatings on silicon wafers, spin-coating of colloidal pure PS nanoparticles and carboxylated PS nanoparticles is used. Our results indicate that thermal annealing in the vicinity of the glass transition temperature T(g) of pure PS leads to a rapid loss in the ordering of the nanoparticles in spin-coated films. For carboxylated particles, this loss of order is shifted to a higher temperature, which can be useful for applications at elevated temperatures. Our model assumes a softening of the boundaries between the individual colloidal spheres, leading to strong changes in the nanostructure morphology. While the nanostructure changes drastically, the macroscopic morphology remains unaffected by annealing near T(g).     

A printed nanolitre-scale bacterial sensor array

The last decade has witnessed a significant increase in interest in whole-cell biosensors for diverse applications, as well as a rapid and continuous expansion of array technologies. The combination of these two disciplines has yielded the notion of whole-cell array biosensors. We present a potential manifestation of this idea by describing the printing of a whole-cell bacterial bioreporters array. Exploiting natural bacterial tendency to adhere to positively charged abiotic surfaces, we describe immobilization and patterning of bacterial "spots" in the nanolitre volume range by a non-contact robotic printer. We show that the printed Escherichia coli-based sensor bacteria are immobilized on the surface, and retain their viability and biosensing activity for at least 2 months when kept at 4 °C. Immobilization efficiency was improved by manipulating the bacterial genetics (overproducing curli protein), the growth and the printing media (osmotic stress and osmoprotectants) and by a chemical modification of the inanimate surface (self-assembled layers of 3-aminopropyl-triethoxysilane). We suggest that the methodology presented herein may be applicable to the manufacturing of whole-cell sensor arrays for diverse high throughput applications.     

Cytotoxicity and Antiproliferative Effect of Hypericin and Derivatives after Photosensitization

The toxicity on three human tumor cell lines (A431, HeLa and MCF7) of five phenanthroperylenequinones (hypericin and derivatives) and two perylenequinones (cercosporin and calphostin C) was investigated after photosensitization (4 J/cm²). Furthermore, the antiproliferative effect on HeLa cells was studied for the phenanthroperylenequinones. Hypericin, 2,5-dibromohypericin, 2,5,9,12-tetrabromohypericin and perylenequinones displayed a potent cytotoxic and antiproliferative effect in the nanomolar range. Hypericin dicarboxylic acid exhibited no photoactivity. In general, the antiproliferative activity correlated well with the photocytotoxicity. However, the nonphotocytotoxic compound hexamethylhypericin showed potent antiproliferative activity in the nanomolar range, probably exerting its action by protein kinase C inhibition. Without light irradiation, no cytotoxic and antiproliferative effect was observed for any photocytotoxic phenanthroperylenequinone compound. Furthermore, confocal laser microscopy revealed that the subcellular localization in A431 cells was similar for the photoactive compounds; the photosensitizers were mainly concentrated in the perinuclear region, probably corresponding with the Golgi apparatus and the endoplasmic reticulum. In addition, the accumulation of the photosensitizers in HeLa cells was investigated. All compounds except hypericin dicarboxylic acid were found to concentrate to a large extent in the cells. The compound 2,5,9,12-tetrabromohypericin seemed intrinsically more effective than hypericin since the intracellular concentration of the bromoderivative was a magnitude of order lower than that of hypericin although both compounds showed similar photobiological activity.     

Structural elucidation of biologically active neomycin N‐octyl derivatives in a regioisomeric mixture by means of liquid chromatography/ion trap time‐of‐flight mass spectrometry

Structural elucidation of six regioisomers of mono‐N‐octyl derivatized neomycin is achieved using MSⁿ (up to n = 4) on an ion trap time‐of‐flight (IT‐TOF) instrument equipped with electrospray ionization. The mixture of six derivatized neomycin analogues was generated by reductive amination in a shotgun synthetic approach. In parallel to the liquid chromatography/mass spectrometry (LC/MS) detection, the antibacterial activity of the neomycin regioisomers was tested by post‐column addition of buffer and bacterial inocula, subsequent microfractionation of the resulting mixture, incubation, and finally a chemiluminescence‐based bioactivity measurement based on the production of bacterial ATP. The MS‐based high‐resolution screening approach described can be applied in medicinal chemistry to help in designing and producing new antibiotic substances, which is particularly challenging due to the high functionality of most antibiotic substances, therefore requiring advanced (hyphenated) separation and detection techniques for compound mixtures. Copyright © 2010 John Wiley & Sons, Ltd.     

[3+2] Cycloadditions of Metallo Nitrile Ylides and Metallo Nitrile Imines with Metal Carbonyl,Thiocarbonyl, and Isocyanide Complexes: Heterodimetallic Systems with Bridging Heterocycles [1]

The reactions of [Re(CO)₆]⁺, [FeCp(CO)₂CS]⁺ and [FeCp(CNPh)₃]⁺ with the metallo nitrile ylides [M^–{C⁺=N–C^–(H)CO₂Et}(CO)₅]^– (M = Cr, W) and the chromio nitrile imine [Cr^–{C⁺=N–N^–H}(CO)₅]^– (generated by mono‐α‐deprotonation of the parent isocyanide complexes) to give neutral 5‐metallated 1,3‐oxazolin‐ ( 1 ), 1,3‐thiazolin‐ ( 2 ), imidazolin‐ ( 3 , 4 ), 1,3,4‐oxdiazolin‐ ( 5 ), 1,3,4‐thiadiazolin‐ ( 6 ) and 1,3,4‐triazolin‐2‐ylidene ( 8 ) chromium and tungsten complexes represent the first all‐organometallic versions of Huisgen’s 1,3‐dipolar cycloadditions. The formation of 6 and 8 is accompanied by partial decomposition to (OC)₅Cr–C≡N–FeCpL₂ {L = CO ( 7 ), CNPh ( 9 )}. The structures of 4a and 5 have been characterized by X‐ray diffraction.     

Tandem mass spectrometry of silver-adducted ferrocenyl catalyst complexes

Ferrocene is a popular template in material science due to its exceptional characteristics that offer the ability to optimize the selectivity and activity of catalysts by the addition of carefully selected substituents. In combinatorial catalyst development, the high susceptibility to electrophilic substitution reactions offers the opportunity for the rapid introduction of molecular diversity. Mass spectrometry (MS)-based continuous-flow systems can be applied to rapidly evaluate catalyst performance as well as to (provisionally) identify the introduced catalyst complexes. Herein, we describe the fragmentation characteristics of the [ferrocenyl bidentate + Ag](+) catalyst complexes in dedicated (high-resolution) MS(n) experiments. The investigation of the fragmentation patterns of a selected number of catalyst classes is accompanied with a density functional theory investigation of fragmentation intermediates in order to assess the viability of a selected fragmentation mechanism.     

Targeted LC–MS derivatization for aldehydes and carboxylic acids with a new derivatization agent 4-APEBA

Based on the template of a recently introduced derivatization reagent for aldehydes, 4-(2-(trimethylammonio)ethoxy)benzeneaminium dibromide (4-APC), a new derivatization agent was designed with additional features for the analysis and screening of biomarkers of lipid peroxidation. The new derivatization reagent, 4-(2-((4-bromophenethyl)dimethylammonio)ethoxy)benzenaminium dibromide (4-APEBA) contains a bromophenethyl group to incorporate an isotopic signature to the derivatives and to add additional fragmentation identifiers, collectively enhancing the abilities for detection and screening of unknown aldehydes. Derivatization can be achieved under mild conditions (pH 5.7, 10 °C). By changing the secondary reagent (1-ethyl-3-(3-dimethylaminopropyl) carbodiimide instead of sodium cyanoborohydride), 4-APEBA is also applicable to the selective derivatization of carboxylic acids. Synthesis of the new label, exploration of the derivatization conditions, characterization of the fragmentation of the aldehyde and carboxylic acid derivatives in MS/MS, and preliminary applications of the labeling strategy for the analysis of aldehydes in urine and plasma are described.     

Quantification of free and total salicylic acid in plants by solid-phase extraction and isocratic high-performance anion-exchange chromatography

Salicylic acid (SA) is an important signaling compound in plants and is involved in various defense responses. Here we report a new method for quantification of free and total soluble SA in Arabidopsis thaliana with 5-fluorosalicylic acid (5-FSA) as internal standard. The SA was isolated from leaf extracts by solid-phase extraction with phenyl-phase cartridges and selectively eluted as the cationic iron(III)-complex. Recoveries of SA and 5-FSA were equal and exceeded 90%. Free SA was subsequently released from the iron(III)-complex by addition of 2,2-bipyridyl and high-performance anion-exchange chromatography was performed on an NH₂ column. The SA appeared as last peak with a retention time of 15 min, baseline-separated from other substances. On-line detection was performed fluorimetrically for both SA and 5-FSA at an excitation wavelength of 300 nm and an emission wavelength of 410 nm, because both substances give similar fluorescence spectra. The detection limit for SA was 5 ng g^–1 FW for a sample size of 100 mg. Thus the main advantages of the method are highly selective sample preparation, increased sensitivity, reduced analysis time compared with reversed-phase HPLC, and use of a novel internal standard detectable under the same conditions as SA. The techniques described are applicable to other plant materials.