Determination of total carbon and total organic carbon from volatile air pollutants

Summary The method developed based on the determination of TC and TOC in the form of the total amount of CO₂ requires application of the proper techniques for the final determination of CO₂. The possibility of using a stream of carrier gas at a convenient flow-rate for desorbing quantitatively CO₂ concentrated on a molecular sieve permits use of a wide variety of known analytical techniques for the final determination of CO₂. Various methods were compared on the basis of both absolute and calibration measurements. The absolute methods chosen were gravimetric (classical or an automated version based on application of a gravimetric automat and automatic recording balance), thermogravimetric analysis and coulometry. The calibration methods included thermal conductivity, the flame-ionization detector (after conversion of CO₂ into methane) and infrared absorption. Usefulness of the methods was evaluated on the basis of comparative statistical analysis of experimental data with respect to precision (Snedecor'sF-test and Bartlett'sU ²-test) and accuracy (Student'st-test).

---

Zusammenfassung Das entwickelte Verfahren zur Bestimmung des TC- und TOC-Gehaltes in Form der gesamten Menge CO₂ erfordert die Anwendung geeigneter Analysentechniken zur Endbestimmung dieser Verbindung. Die Möglichkeit einer Desorption des am Molekularsieb angereicherten CO₂ in einem Gasstrom mit geeignetem Durchfluß erlaubt zur Endbestimmung von CO₂ die Anwendung einer Reihe verschiedener Analysenverfahren. Die Anwendbarkeit verschiedener, auf Absolutverfahren und auch auf relativen Messungen beruhender Methoden wurde vergleichend untersucht. Die folgenden Methoden zur CO₂-Bestimmung wurden gewählt: die Gravimetrie (klassische oder automatisierte unter Einsatz eines Wägeautomaten und einer registrierenden Waage), die Thermogravimetrie und die Coulometrie. Von den relativen Methoden wurden die Thermokonduktometrie, der Flammenionisationsdetektor (nach Umsetzung von CO₂ zu Methan) und das IR-Absorptionsmeßverfahren geprüft. Die Anwendbarkeit der Methoden wurde mit Hilfe statistischer Prüfverfahren beurteilt, wobei die Präzision (SnedecorsF-Test und BartlettsU ²-Test) und die Genauigkeit (Studentst-Test) der erhaltenen Analysenwerte verglichen wurden.

     

Working conditions of a Clark-type sensor with a polyethylene membrane in the presence of vapours of chlorine derivatives of methane

The indications of a Clark-type electrochemical sensor with a polyethylene foil used as a membrane are noticeably changed if vapours of chlorine derivatives of methane (CCl₄, CHCl₃, CH₂Cl₂) are present in the atmosphere examined and the sensor has been calibrated in an atmosphere from which those vapours were absent. The sensitivity of the sensor increases and tends to deviate from linearity. The increase is more profound, when the number of chlorine atoms within a molecule of the vapour increases, the partial pressure of the vapour increases and the temperature of the atmosphere examined decreases. If the vapours affect the membrane for a long time, the response time decreases. If the membrane is freshly subjected to the influence of the vapours, a longer period of time is needed to reach a stable indication corresponding to the partial pressure of oxygen actually observed.     

Prediction of Retention in Liquid-Solid Chromatography with Ternary Mobile Phases

The method for the prediction of capacity factors in ternary mobile phases is presented. The adsorption mechanism of retention is considered. The simple theoretical equations are proposed for mobile phases for which the ratio of mole fractions of the weaker solvents remains fixed. The relations between parameters characterizing retention in ternary and binary mobile phases are discussed. The theoretical model is verified for numerous solutes and different mobile phases.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

微波－气相－热压法分解高纯铂的研究

本文研究了微波气相热压法新技术分解高纯铂在密闭的聚四氟乙烯高压罐中，以微波瞬间加热混合酸产生的高压、纯净蒸气分解金属铂，此法避免了酸中杂质的沾污以制备供高纯铂分析的试液，提高了痕量杂质分析的准确度和降低检测限     

Homo- and hetero-nuclear chromium(III) complexes with natural ligands. Part 2. Oxo- and hydroxo-bridged chromium(III)/vanadium(V) species

Six new heteropolynuclear chromium(III)/vanadium(V) complexes with natural ligands: glycine, glutaminic, nicotinic and asparginic acids, have been isolated and physicochemically characterised. The complexes have been analysed using spectroscopic (diffuse reflectance u.v.–vis., i.r.), magnetic methods and by FAB mass spectra. Spectral analyses with the digital filter and band deconvolution methods are presented. Additionally, preliminary toxicity studies have been performed.     

Tricarbonyl(dialkylamidocyclohexa-1,3-diene)iron: Preparation,Isomerization and Stereochemistry

The direct reaction of iron pentacarbonyl with diethylamidocyclohexadiene gave three isomeric tricarbonyliron complexes, 1, 2 and 3. Only 1 isomerized to give 2 under acidic conditions, whereas 3 remained unchanged. The chemical properties of the tricarbonyl(amidocyclohexadiene)iron complexes differed from those of the tricarbonyl(carboxycyclohexadiene)iron complexes. Complex 3 which underwent no hydride abstraction with triphenylmethyl hexafluorophosphate, has an exo stereochemistry.     

Isotachophoretic determination of carboxylic acids in biodegradation samples

In the current study a method of isotachophoretic separation of selected carboxylic acids was developed. The method was used for the determination of carboxylated oligo(ethylene glycol)s and their degradation products in biodegradation tests of PEG 250 DA [a mixture of dicarboxylated oligo(ethylene glycol)s]. Two tests were performed in the studies: the Organization for Economic Cooperation and Development (OECD) screening test and the river water die-away test. Both the biodegradation tests proved relatively fast biodegradation of the studied compounds. In the OECD screening test the biodegradation was faster than in the river water die-away test which can be ascribed to a higher concentration of bacteria in the biodegradation liquor. The minimal sample pretreatment and relatively low cost of analysis by the isotachophoretic method used here make it a good alternative to existing methods of carboxylic acids analysis.     

Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

The classification of differential structures on quantum 2-spheres

Exterior algebras of differential forms on quantum 2-spheresS _qc ² ,q[–1, 1]/{0},c[0, ] (c=0 forq=±1), are classified. In the definition of exterior algebras we assume the invariance w.r.t. the action of the quantumSU(2) group and dimensionality conditions (which imply that we deal with two-dimensional manifolds). The exterior algebras exist only forc=0 and are unique in that case. The corresponding generalized directional derivatives are provided.