Synthese von 1, 2-annelierten 1, 4-Benzodiazepinen und 4, 1-Benzoxazepinen

The syntheses of 1, 2-annelated 1, 4-benzodiazepines (IV, Y = N) and 4, 1-benzoxazepines (IV, Y = 0) are described (Scheme 1). The key step is a nucleophilic aromatic substitution of 2-substituted piperazines (II, Z = N? CH₃), piperidines (II, Z = CH₂) or pyrrolidines (II, Z= (CH₂)₀) with activated aryl halides (I).     

Determination of Aroma Compounds from Alcoholic Beverages in Spiked Blood Samples by Means of Dynamic Headspace GC–MS

Some aroma compounds found in alcoholic beverages are characteristic of a certain beverage (i.e. 2,4-decadienoic acid ethyl ester is characteristic of pear spirit and 5-butyltetrahydro-4-methylfuran-2-on “whiskey lactone” is characteristic of aged spirits like whiskey). These substances were detectable in beverages but not in blood samples. The aim of this investigation was to find a sensitive sampling technique for aroma compounds in whole blood samples. This technique may be used in forensic toxicology for examination of drinking claims. The method comprises dynamic headspace sampling using a purge and trap concentrator, followed by quantitative gas chromatography–mass spectrometry (dynamic HS–GC–MS). The influence of sample preparation, trap adsorbents and sample temperature as well as desorption time and purge time on the quality of the analytical results were investigated. The following optimal parameters were determined: stirred and diluted whole blood sample without salt addition, use of Carbotrap C as trap material, sample temperature at 80 °C, desorption time 20 min and purge time 30 min. These optimal parameters were used for the determination of detection limits (LOD). The LOD of aroma compounds by means of dynamic headspace sampling were compared with the results of conventional sampling: the static headspace technique. Limits of detection for the aroma compounds with conventional static headspace GC are in the range 400–10,000 μg L^?1. Dynamic headspace–GC was found to be a more sensitive sampling technique for most of the aroma compounds investigated (e.g. C₄–C₈ ethyl esters, benzoic acid ethyl ester, linalool oxide and 4-ethylguaiacol) with detection limits between 1 and 50 μg L^?1, but there were also limits to the sampling of substances with lower volatility like decanoic acid ethyl ester, 2,4-decadienoic acid ethyl ester, eugenol and whiskey lactone with detection limits of about 1,000 μg L^?1.     

Carbenerhodium complexes of the half-sandwich-type: synthesis, substitution, and addition reactions

A series of carbenerhodium(I) complexes of the general composition [(eta5-C5H5)Rh(=CRR')(L)] (2a-2i) with R = R'= aryl and L = SbiPr3 or PR3 has been prepared from the square-planar precursors trans-[RhCl(=CRR')(L)2] and NaC5H5 in excellent yields. Reaction of the triisopropylsibane derivative 2a. which contains a rather labile Rh-Sb bond, with CO, PMe3, and CNR (R = Me, CH2Ph, tBu) leads to the displacement of the SbiPr3 ligand and affords the substitution products [(eta5-C5H5)Rh(=CPh2)(L)] (3-7). In contrast, treatment of the triisopropylphosphane compound 2c with CO and CNtBu leads to the cleavage of the Rh=CPh2 bond and gives besides [(eta5-C5H5)Rh(PiPr3)(L)] (10, 12) by metal-assisted C-C coupling diphenylketene Ph2C=C=O (11) or the corresponding imine Ph2C=C=NtBu (13). While the reaction of 2a, c with C2H4 yields [(eta5-C5H5)Rh(C2H4)(L)] (14, 15) and the trisubstituted olefin Ph2C=CHCH3 (16), treatment of 2a, c with RN3 leads to the cleavage of both the Rh-EiPr3 and Rh=CPh2 bonds and gives the chelate complexes [(eta5-C5H5)Rh(kappa2-RNNNNR)] (19, 20). The substitution products 3 (L=CO) and 4 (L= PMe3) react with an equimolar amount of sulfur or selenium by addition of the chalcogen to the Rh=CPh2 bond to generate the complexes [(eta5-C5H5)Rh(kappa2-ECPh2)(L)] (21-24) with thio- or selenobenzophenone as ligand. Similarly, treatment of 3 with CuCl affords the unusual 1:2 adduct [(eta5-C5H5)(CO)Rh(mu-CPh2)(CuCl)2] (25), which reacts with NaC5H5 to form [(eta5-C5H5)(CO)Rh(muCPh2)Cu(eta5-C5H5)] (26). The molecular structures of 3 and 22 have been determined by X-ray crystallography.     

Funktionalisierte Alkinkomplexe von Wolfram(VI). Synthese und Kristallstrukturen von [WCl4(Et?Se?CC?Se?Et)(THF)] und [WCl4(Et?Te?CC?Te?Et)(THF)]

Functionalized Alkyne Complexes of Tungsten(VI). Syntheses and Crystal Structures of [WCl₄(Et? Se? C?C? Se? Et)(THF)] and [WCl₄(Et? Te? C?C? Te? Et)(THF)] The title compounds have been prepared by reactions of [WCl₄(SEt₂)₂] with the alkynes Et? X? C?C? X? Et (X = Se, Te) in CCl₄ solution and subsequent addition of tetrahydrofurane. Both complexes were characterized by crystal structure determinations. [WCl₄(Et? Se? C?C? Se? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 2942 unique reflections, R = 0.038. Lattice dimensions at 20°C: a = 934.2, b = 1639.5, c = 1189.5 pm, β = 96.497°. [WCl₄(Et? Te? C?C? Te? Et)(THF)]: Space group P2₁/n, Z = 4, structure determination with 4097 unique reflections, R = 0.067, Lattice dimensions at ?70°C: a = 899.2, b = 1691.9, c = 1213.3 pm, β = 96.82°. The complexes have monomeric molecular structures with the oxygen atom of the THF molecules in trans-position to the side-on bound alkyne ligands.     

Übergangsmetallphosphidokomplexe. VIII. Strukturuntersuchungen an Übergangsmetallphosphor-Vier- und Sechsringkomplexen. Die Strukturen von [(CO)4MnPH2]2, [(CO)4MnPH2]3 und [cpNiPH2]3

Transition Metal Phosphido Complexes. VIII. X-Ray Diffraction Studies of Transition Metal Phosphorus Four- and Six-Membered Ring Complexes. Structures of [(CO)₄MnPH₂]₂, [(CO)₄MnPH₂]₃, and [cpNiPH₂]₃ [(CO)₄MnPH₂]₂ 1 crystallizes triclinic in the space group P1 with a = 680.4 pm, b = 706.4 pm, c = 919.1 pm, α 110.5°, β = 91.92°, γ 115.65°, and Z = 1 formula unit. The molecule exhibits a centrosymmetrical structure. The bond angles within the planar four-membered (Mn? P)₂-ring are 76.1° at the Mn atoms and 103.9° at the P atoms, respectively. The average Mn? P bond distance is found to be 235.1 pm. [(CO)₄MnPH₂]₃ 2 crystallizes monoclinic in the space group P2/n with a = 905.2 pm, b = 974.8 pm, c = 1264.2 pm, β = 109.1°, and Z = 2 formula units. The framework of the six-membered (Mn? P)₃-ring can be described as having a twist boat conformation. The average endocyclic bond angles are with 89.1° at the Mn atoms and 130.1° at the P atoms, respectively, largely widened compared to 1 . The average Mn? P bond distance, which is found to be 238.5 pm, is also slightly increased compared to 1 . [cpNiPH₂]₃ 3 crystallizes rhombohedral in the space group R3. The cell constants (hexagonal setting) are a = b = 1686.1 pm, c = 561.1 pm and Z = 3 formula units. The six-membered (Ni? P)₃-ring exhibits a chair conformation. The endocyclic bond angles are with 92.3° at the Ni atoms and 124.3° at the P atoms, respectively, comparable with those of the six-membered ring compound 2 . The Ni? P bond distance is found to be 215.2 pm. The eyclopentadienyl ligands are disordered and have been refined as rigid groups.     

Correlation effects on energy curves for proton transfer. The cation [H5O2]+

Potential curves for proton transfer in [H₅O₂]⁺ and for the dissociation of one OH bond in [H₃O]⁺ were calculated by both ab initio and semi-empirical LCAO MO SCF CI methods. The energy barrier of the symmetric double minimum potential in [H₅O₂]⁺ is very sensitive to electron correlation. At an OO distance of 2.74 Å it decreases from the HF value of 9.5 kcal/mole to about 7.0 kcal/mole. The results of the semi-empirical calculations agree well with the ab initio data as long as only relative effects are regarded. The partitioning of correlation energy into contributions of individual electron pairs is very similar for proton transfer in [H₅O₂]⁺ and for the dissociation of one OH bond in [H₃O]⁺. In this example the proton transfer appears as a superposition of two “contracted ionic dissociation” processes. An interpretation of the behaviour of correlation during these processes is presented.     

Model Compounds for Iron Proteins. Structures and Magnetic, Spectroscopic, and Redox Properties of Fe(III)M(II) and [Co(III)Fe(III)](2)O Complexes with (&mgr;-Carboxylato)bis(&mgr;-phenoxo)dimetalate and (&mgr;-Oxo)diiron(III) Cores

A series of heterobimetallic complexes of the type [Fe(III)M(II)L(&mgr;-OAc)(OAc)(H(2)O)](ClO(4)).nH(2)O (2-5) and [{Fe(III)Co(III)L(&mgr;-OAc)(OAc)}(2)(&mgr;-O)](ClO(4))(2).3H(2)O (6) where H(2)L is a tetraaminodiphenol macrocyclic ligand and M(II) = Zn(2), Ni(3), Co(4), and Mn(5) have been synthesized and characterized. The (1)H NMR spectrum of 6 exhibits all the resonances between 1 and 12 ppm. The IR and UV-vis spectra of 2-5 indicate that in all the cases the metal ions have similar coordination environments. A disordered crystal structure determined for 3 reveals the presence of a (&mgr;-acetate)bis(&mgr;-phenoxide)-Ni(II)Fe(III) core, in which the two metal ions have 6-fold coordination geometry and each have two amino nitrogens and two phenolate oxygens as the in-plane donors; aside from the axial bridging acetate, the sixth coordination site of nickel(II) is occupied by the unidentate acetate and that of iron(III) by a water molecule. The crystal structure determination of 6 shows that the two heterobinuclear Co(III)Fe(III) units are bound by an Fe-O-Fe linkage. 6 crystallizes in the orthorhombic space group Ibca with a = 17.577(4) ?, b = 27.282(7) ?, c = 28.647(6) ?, and Z = 8. The two iron(III) centers in 6 are strongly antiferromagnetically coupled, J = -100 cm(-1) (H = -2JS(1).S(2)), whereas the other two S(1) = S(2) = (5)/(2) systems, viz. [Fe(2)(III)(HL)(2)(&mgr;-OH)(2)](ClO(4))(2) (1) and the Fe(III)Mn(II) complex (5), exhibit weak antiferromagnetic exchange coupling with J = -4.5 cm(-1) (1) and -1.8 cm(-1) (5). The Fe(III)Ni(II) (3) and Fe(III)Co(II) (4) systems, however, exhibit weak ferromagnetic behavior with J = 1.7 cm(-1) (3) and 4.2 cm(-1) (4). The iron(III) center in 2-5 exhibits quasi-reversible redox behavior between -0.44 and -0.48 V vs Ag/AgCl associated with reduction to iron(II). The oxidation of cobalt(II) in 4 occurs quasi-reversibly at 0.74 V, while both nickel(II) and manganese(II) in 3 and 5 undergo irreversible oxidation at 0.85 V. The electrochemical reduction of 6 leads to the generation of 4.     

Formation and Properties of Losod,a New Sodium Zeolite

Losod, a new type of crystalline hydrated sodium aluminosilicate, Na₁₂Al₁₂Si₁₂O₄₈ · q H₂O, has been prepared from reaction mixtures containing bulky quaternary alkylammonium ions, particularly azonia-spiro[4.4]nonane, besides sodium ions. Losod crystallizes from batches with a low sodium content (Na/Al ≤ 1 and Si/Al ≈? 1). The quaternary ammonium hydroxide primarily serves as a source of hydroxide ions and is not incorporated into the zeolite crystals. These bulky bases provide a useful means for controlling the alkalinity of the system independently of the concentration of the necessary cations built into the zeolite. The crystals of Losod are hexagonal (a = 12.91 and c = 10.54 Å) and the proposed framework structure shows a polytypic relationship to sodalite and cancrinite. Losod has reversible sorption and ion exchange properties typical of a small-pore zeolite and in essential agreement with the proposed structure.     

The convergence of the Rayleigh-Ritz Method in quantum chemistry

Two sufficient criteria for the convergence of the Rayleigh-Ritz Method (RRM) with respect to the eigenvalues (E-convergence) of non-relativistic electronic Hamiltonians of molecules are discussed and compared. Moreover, a necessary and sufficient criterion is given. By example (Sect. 9) it is shown that the L ²-completeness of the basis is not sufficient to guarantee E-convergence. The convergence of the wave functions in different norms (-convergence) is also investigated. In particular, sufficient conditions for the one-particle basis functions (orbitals) are given, such that a CI calculation in this basis is both E- and -convergent.     

R?ntgenspektrometrische Goldbestimmung in sulfidischen Erzen nach chemischer Anreicherung

Zusammenfassung Es wird eine Goldbestimmung an sulfidischen Erzen für den Bereich von 0,05–5 ppm bei 20 g Einwaage beschrieben. Das Gold wird durch Salpetersäurebehandlung von den übrigen Metallen getrennt, mit Salzsäure/ Salpetersäure gelöst und mit Selen als innerem Standard und Tellur als Spurenfänger mittels Zinn(II)-chlorid gefällt. Der Niederschlag wird auf ein Membranfilter aufgezogen. Die Goldbestimmung erfolgt über den Impulsratenquotienten der Gold L- und Selen K-Linien. Die störende Molybdän K-Strahlung und die Comptonstreuung werden durch ein Zirkoniumblech auf dem Röhrenfenster unterdrückt. Der Variationskoeffizient beträgt 20% für 0,2–5 ppm und 53,6% für 0,05 ppm.

---

Summary A method is described for the determination of gold in sulphide ores within the concentration range of 0.05–5 ppm with sample weights of 20 g. Gold is separated from the other metals by treatment with nitric acid, dissolved by hydrochloric acid, containing some nitric acid, and is finally precipitated by stannous chloride applying selenium as internal standard and tellurium as collecting agent. The precipitate is mounted on a diaphragm filter and the determination of gold is carried out by X-ray analysis suppressing the disturbing Mo _K radiation and compton scattering by a zirconium sheet-metal on the X-ray tube. The pulse rate quotient of the lines Au _L /Se _K is a function of the concentration of gold. The variation coefficient is 20% for 0.2–5 ppm and 53.6% for 0.05 ppm.

---

---

Herrn Prof. Dr.-Ing. habil. J. Hesemann zum 65. Geburtstag gewidmet.