介质面刻槽抑制二次电子倍增蒙特卡罗模拟

利用蒙特卡罗方法,针对介质表面刻槽抑制二次电子倍增的实验现象,进行了数值模拟研究。给出了二次电子倍增动力学方程、刻槽边界条件、二次电子初始能量与角度分布以及发射率分布关系;讨论了槽深、槽宽对二次电子倍增的抑制效果,以及同一刻槽结构对不同微波场强度和频率的二次电子倍增抑制能力;分析了双边二次电子倍增区域。数值研究结果表明:增加槽深、缩短槽宽可以抑制二次电子倍增;同一刻槽结构,更易于抑制高频场、场强较低或较高下的二次电子倍增;刻槽尺寸的选择还应避开双边二次电子倍增区间。将数值模拟结果与相关实验现象进行了对比,吻合得较好。     

A high‐order ADI finite difference scheme for a 3D reaction‐diffusion equation with neumann boundary condition

In this article, we extend the fourth‐order compact boundary scheme in Liao et al. (Numer Methods Partial Differential Equations 18 (2002), 340–354) to a 3D problem and then combine it with the fourth‐order compact alternating direction implicit (ADI) method in Gu et al. (J Comput Appl Math 155 (2003), 1–17) to solve the 3D reaction‐diffusion equation with Neumann boundary condition. First, the reaction‐diffusion equation is solved with a compact fourth‐order finite difference method based on the Padé approximation, which is then combined with the ADI method and a fourth‐order compact scheme to approximate the Neumann boundary condition, to obtain fourth order accuracy in space. The accuracy in the temporal dimension is improved to fourth order by applying the Richardson extrapolation technique, although the unconditional stability of the numerical method is proved, and several numerical examples are presented to demonstrate the accuracy and efficiency of the proposed new algorithm. © 2012 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013     

双波长数字全息相位解包裹方法研究

使用两个不同的波长分别记录数字全息图,分别由数值再现得到每个波长对应的包裹相位图,再求得两者的相位差得到等效波长的相位图,通过此双波长相位解包裹方法得到连续的相位分布以消除相位包裹。通过数值模拟研究了双波长相位解包裹方法,搭建了双波长数字全息实验系统,并利用660nm和671nm两个波长的激光对标准石英平片和平凹透镜进行了相衬成像。通过双波长相位解包裹方法得到了连续的相位分布,实验结果与数值模拟结果具有较好的一致性,证明了双波长相位解包裹方法的有效性。     

A STABILITY ANALYSIS OF THE （k） JACOBI MATRIX INVERSE EIGENVALUE PROBLEM

In this paper we will analyze the perturbation quality for a new algorithm of the (k) Jacobi matrix inverse eigenvalue problem.     

Dihydroisocoumarins and Dihydroisoflavones from the Rhizomes of Dioscorea collettii with Cytotoxic Activity and Structural Revision of 2,2′-Oxybis(1,4-di-tert-butylbenzene)

The investigation of the constituents of the rhizomes of Dioscorea collettii afforded one new dihydroisocoumarin, named (−)-montroumarin (1a), along with five known compounds—montroumarin (1b), 1,1′-oxybis(2,4-di-tert-butylbenzene) (2), (3R)-3′-O-methylviolanone (3a), (3S)-3′-O-methylviolanone (3b), and (RS)-sativanone (4). Their structures were elucidated using extensive spectroscopic methods. To the best of our knowledge, compound 1a is a new enantiomer of compound 1b. The NMR data of compound 2 had been reported but its structure was erroneous. The structure of compound 2 was revised on the basis of a reinterpretation of its NMR data (1D and 2D) and the assignment of the ¹H and ¹³C NMR data was given rightly for the first time. Compounds 3a–4, three dihydroisoflavones, were reported from the Dioscoreaceae family for the first time. The cytotoxic activities of all the compounds were tested against the NCI-H460 cell line. Two dihydroisocoumarins, compounds 1a and 1b, displayed moderate cytotoxic activities, while the other compounds showed no cytotoxicity.     

All-optical switch based on photonic crystal microcavity with multi-resonant modes

We present a design of all-optical switches based on one-dimensional photonic crystals (1D PhC) doped with nonlinear optical materials. The 1D PhC switch structure is composed of a PhC cavity sandwiched by two accessional PhC microcavities. The center PhC cavity has two resonant frequencies with nearly the same quality factors (Q), while the accessional PhC cavities have the same resonant frequency, which is equal to one of the resonant frequencies of the center cavity. The two accessional PhC cavities cause reduction of Q value in this resonant frequency and result in different Q values of two modes. We realize all-optical switch effect by selecting pump light wavelength at the low Q mode and probe light wavelength at the other mode. The theoretical simulations by using the finite difference time domain method show that the pump light intensity required to realize optical switch effect in the designed switch is 50 times smaller than that in one-dimensional photonic crystals cavity with only one resonant mode.     

DOPA-IGF-1 Coated HA/PLGA Microspheres Promoting Proliferation and Osteoclastic Differentiation of Rabbit Bone Mesenchymal Stem Cells

To explore the ability of dihydroxyphenylalanine-insulin-like growth factor-1 (DOPA-IGF-1) coated hydroxyapatite/poly(lactic-co-glycolic acid)(HA/PLGA) microspheres to promote the proliferation and osteoclastic differentiation of rabbit bone mesenchymal stem cells(rBMSCs), HA/PLGA microspheres with different HA content (10%, 30%, 50%, mass fraction) were prepared by electrospinning method and HA/PLGA microspheres with 50% HA were coated with IGF-1 and DOPA-IGF-1, respectively. They were co-cultured with rBMSCs, respctively. Cell counting kit-8(CCK-8) detection, confocal laser scanning microscopy(CLSM), alkaline phosphatase(ALP) detection and osteogenesis related genes COL IA1, Runx2 and bone morphogenetic protein-2(BMP-2) detection were conducted to detect the proliferation activity, cell morphology, differentiation ability and the expression level of osteogenesis-related genes of cells cultured on all microspheres groups. The results showed that rBMSCs proliferation increased in an HA content dependent manner, and cells proliferated more in the IGF-1 coated and DOPA-IGF-1 coated groups, in particular in DOPA-IGF-1 coated group, and the differences were more remarkable over time (P<0.05). HA/PLGA microspheres promoted the proliferation and osteogenic differentiation of rBMSCs, and DOPA-IGF-1 coating enhanced the proliferation and osteogenic differentiation of rBMSCs.     

Engineering of Nucleic Acids and Synthetic Cofactors as Holo Sensors for Probing Signaling Molecules in the Cellular Membrane Microenvironment

The comprehensive understanding of the mechanisms underlying the interaction of cells with their membrane microenvironment is of great value for fundamental biological research; however, tracking biomolecules on cell surfaces with high temporal and spatial resolution remains a challenge. Herein, a modular strategy is presented for the construction of cell surface DNA‐based sensors by engineering DNA motifs and synthetic cofactors. In this strategy, a stimuli‐reactive organic molecule is employed as the cofactor for the DNA motif, and the self‐assembly of them forms a FRET‐based holo DNA‐based sensor. With the use of the DNA‐based sensors, the versatility of this modular strategy has been demonstrated in the ratiometric imaging of the cellular extrusion process of endogenous signaling molecules, including sulfur dioxide derivatives and nitric oxide.     

Design of a 1,8-naphthalimide-based OFF-ON type bioorthogonal reagent for fluorescent imaging in live cells

A novel 1,8-naphthalimide-based OFF-ON type fluorogenic sydnone (Naph-Syd) is designed as bioorthogonal probe for imaging. Sydnone moiety efficiently quenches the native fluorescence of 1,8-naphthalimide, which can be restored with the enhancement of about 300-fold, after reacting with strained cyclooctynes to form pyrazole products (Naph-Pyr). The second-order rate constant of this bioorthogonal cycloaddition can be up to 2.5 L mol^?1 s^?1, which benefits imaging of biomolecules at low concentrations in cellular environment.