License plate location based on trichromatic imaging and color-discrete characteristic

License plate location (LPL) is the key part of automatic license plate recognition (LPR) system that plays an important role in many applications and a number of LPL methods based on color information have been proposed. However, some problems, such as country specific, similar color interference, lighting variation sensitive, time consuming, processing only one kind of LP with same color combination a time and omitting the case of more than one combinations in a LP, should be solved further. In this study, a color-based LPL method that consists of three modules: color edge extraction, denoising and searching, is proposed. Color edge extraction, the kernel of the proposed, is designed by color-discrete characteristics of license plates in the trichromatic wavebands. In the experiment, 1384 images taken from natural scenes in China and other 104 countries or regions are employed. Of which, 74 have been failed to locate the license plates. The success rate and average execution time are 94.7% and 57 ms, respectively.     

A study of GaN MOSFETs with atomic-layer-deposited Al2O3 as the gate dielectric

Accumulation-type GaN metal-oxide-semiconductor field-effect transistors (MOSFETs) with atomic-layer-deposited Al₂O₃ gate dielectrics are fabricated. The device, with atomic-layer-deposited Al₂O₃ as the gate dielectric, presents a drain current of 260 mA/mm and a broad maximum transconductance of 34 mS/mm, which are better than those reported previously with Al₂O₃ as the gate dielectric. Furthermore, the device shows negligible current collapse in a wide range of bias voltages, owing to the effective passivation of the GaN surface by the Al₂O₃ film. The gate drain breakdown voltage is found to be about 59.5 V, and in addition the channel mobility of the n-GaN layer is about 380 cm²/Vs, which is consistent with the Hall result, and it is not degraded by atomic-layer-deposition Al₂O₃ growth and device fabrication.     

用束流位置监测器测量上海光源束流寿命

通过理论分析研究了电磁耦合型束流位置探测器（BPM）用于束流寿命测量的可行性,并在上海光源储存环上进行了束流实验,对其性能进行了评估。实验结果表明,与目前常用的直流流强变压器（DCCT）系统相比,BPM给出的束流寿命具有更高的带宽和分辨力,有利于进行不同时间尺度的束流寿命评估,而且可以通过多个平均的方式来进一步提高测量精度。     

Yb3+/Ho3+/Tm3+共掺碲酸盐玻璃的上转换白光发射及其机理研究

采用高温熔融法分别制备了Yb3+/Ho3+,Yb3+/Tm3+和Yb3+/Ho3+/Tm3+共掺的碲酸盐玻璃。在980nm红外激光激发下,Yb3+/Ho3+/Tm3+共掺的玻璃样品显示了强的蓝光、绿光和红光发射,分别对应于Tm3+的1 G4→3 H6跃迁、Ho3+的5 F4(5 S2)→5I 8跃迁以及Ho3+的5 F5→5I 8和Tm3+的1 G4→3 F4跃迁。通过对比发现,Yb3+/Ho3+/Tm3+共掺样品中的红、绿光积分发射强度比值(3.95)明显大于Yb3+/Ho3+共掺样品(1.69),这是由于Ho3+和Tm3+间存在交叉弛豫过程3 H4(Tm3+)+5I 6(Ho3+)→3 F4(Tm3+)+5 F5(Ho3+)和3 F4(Tm3+)+5I 8(Ho3+)→3 H6(Tm3+)+5I 7(Ho3+)所致。在激发功率密度为8.2 W.cm-2时,Yb3+/Ho3+/Tm3+共掺样品的上转换发光色坐标值为x=0.345,y=0.338,非常接近于等能白光(x=0.333,y=0.333)。     

Vertical assembly of carbon nanotubes for via interconnects

The via interconnects are key components in ultra-large scale integrated circuits(ULSI).This paper deals with a new method to create single-walled carbon nanotubes(SWNTs) via interconnects using alternating dielectrophoresis(DEP).Carbon nanotubes are vertically assembled in the microscale via-holes successfully at room temperature under ambient condition.The electrical evaluation of the SWNT vias reveals that our DEP assembly technique is highly reliable and the success rate of assembly can be as high as 90%.We also propose and test possible approaches to reducing the contact resistance between CNT vias and metal electrodes.     

海杂波背景下小目标检测的分形方法

针对海杂波背景下小目标检测对海情依赖性强的问题, 本文采用分数布朗运动模型对实测海杂波建模, 结合多重分形去势波动分析法确定分形参数, 分析了海杂波的单尺度、多重分形特性. 在单尺度分形的基础上, 利用表征海杂波分形特征的分数维和Hurst指数构建了分形差量, 提出了基于分形差量的小目标检测方法;在多重分形基础上, 比较了两种海杂波的高尺度多重分形特性. 结果表明, 当尺度q > 10时, 纯海杂波的多重分形参数H(q) < 0, 而存在小目标的H(q) > 0, 此差异性为高尺度分形参数的海杂波背景小目标检测提供了判定依据. 所研究的两种方法均能实现不同海情下的小目标检测.     

Top介子在高能正负电子对撞机上的产生

在顶色辅助的人工色(TC2)模型框架下,研究了中性top介子和顶夸克的联合产生过程e+e–→ttπ0t.结果显示此过程的产生截面比标准模型和最小超对称标准模型中e+e–→ttH过程的产生截面都要大.在TC2模型合理的参数空间内,其产生截面可达20fb.通过此过程可在将来的对撞机上探测中性top介子.     

含[V2M6S6O2](M＝Cu,Ag)簇骼单元的八核簇合物的分子结构和谱学性质

报道了两个「Ｖ２Ｍ６Ｓ６Ｏ」（Ｍ＝Ｃｕ,Ａｇ）八核簇合物的合成和分子结构,讨论了它们的约外光谱,＾５１ＶＮＭＲ和电子光谱,采用动态红外光谱跟踪技术探讨「Ｖ２Ｃｕ６Ｓ６Ｏ２」簇合物的成簇机理。     

空间编码与灰度投影相结合实现高效3-D形貌测量的研究

介绍了一种结合空间编码与灰度投影来实现高效三维形貌测量的方法。用空间编码完成对被测空间的粗略编码,用灰度投影完成精确编码,将它们结合起来得到被测物体表面丰富的编码信息,作为一种基于三角法的三维形貌测量方法,能够在物体表面非常不连续和外部光照造成的背景光强分布不确定的情况下工作良好。同时,与传统的空间编码方法相比,它大大提高了空间编码的效率。实验表明,该方法用５ 幅图像取得了与灰度码１０幅图像相当的测量结果。     

La(BO_2)_3基质中Eu~(3+)的发光性质与晶体结构的关系

采用高温固相反应合成了 (La1-xEux) (BO2 ) 3 ,利用X射线粉末衍射方法确定其晶体结构 ,利用红外光谱探讨了 [BO3 ]单元的聚合情况。根据 (La1-xEux) (BO2 ) 3 所属空间群中等效点系的对称性分析及Eu3 + 的荧光光谱 ,详细地探讨了Eu3 + 的发光性质与其所处格位点对称性的关系。La(BO2 ) 3 ∶Eu3 + 体系中 ,Eu3 + 出现较强的5D0 →7F1磁偶极跃迁 ,因而Eu3 + 主要占据点对称性为Ci 的格位 ,出现的其它跃迁是部分Eu3 + 占据偏离Ci 的格位 ,而并非占据C2 或C1格位 ,另外 ,5D0 →7F4 跃迁发射很强 ,其原因尚不清楚。选择适当的助熔剂可以提高样品的结晶程度 ,有利于Eu3 + 占据严格的Ci 格位 ,增强材料的发光性能。