12-钼磷酸中水的存在状态及其热稳定性的质谱法研究

本文运用程序升温脱水-质谱计检测(TPD MS)和红外光谱测定(IR)法研究了12-钼磷酸(PMA)中水的存在状态及其热稳定性. 解迭了PMA的TPD MS谱, 发现PMA中存在有结合能量各异的7种水峰. 讨论了PMA中各种水的结合强度及其对Keggin结构稳定性的影响。     

Black fungus derived aerogel with double faced properties

Black fungus aerogel (BFA) exhibited interesting double-faced properties. Weexplored the diverse properties of each side of the black fungus in three aspects:water contact angle measurements, liquid selective absorption capacity and air pollutant adsorption abilities.     

Theoretical Study of Ethanethiol Adsorption on HZSM-5 Zeolite

The density functional theory and the cluster model methods have been employed to investigate the interactions between ethanethiol and HZSM-5 zeolites. Molecular complexes formed by the adsorption of ethanethiol on silanol H3SiOH with two coordination forms, model Bronsted acid sites of zeolite cluster H3Si(OH)Al(OH)2SiH3 interaction with ethanethiol, aluminum species adsorbed ethanethiol have been comparatively studied. Full optimization and frequency analysis of all cluster models have been carried out using B3LYP hybrid method at 3-21G basis level for hydrogen atoms and 6-31G(d) basis set level for silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms of H3Si(OH)Al(OH)2SiH3-ethanethiol, silanol-ethanethiol and Al(OH)3-ethanethiol have been studied. The calculated results showed the nature of interactions was van der Waals force as exhibited by not much change in geometric structures and properties. The preference order of ethanethiol adsorbed on HZSM-5 zeolite may be residual aluminum species, bridging hydroxyl groups and silanol OH groups from the adsorption heat. The adsorbed models of protonized ethanethiol on bridging hydroxyl OH groups and linear hydrogen bonded ethanethiol on bridging OH groups suggested in literature might not exist as revealed by this theoretical calculation. Possible adsorption models were obtained for the first time.     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Dynamic coating of a capillary with room-temperature ionic liquids for the separation of amino acids and acid drugs by capillary electrophoresis

A room-temperature ionic liquid (IL), 1-ethyl-3-methyl-imidazolium tetrafluoroborate (1E-3MI-TFB), used for the coating of a silica capillary enables one to reduce or invert the electroosmotic flow (EOF) in capillary zone electrophoresis. Excellent separations of amino acids and ary lalkanoic acids were obtained. Such separations could not be obtained in a naked capillary in the presence of the cationic surfactants cetyltrimethylammonium bromide (CTAB) or polycationic polymer hexadimethrine bromide (HDB). The results indicate that 1E-3MI-TFB not only modulates the EOF but also acts as a discriminator. Further experiments indicate that the interaction between hydrogen at C-2 carbon of IL and acid drugs plays an important role in the separation. The text was submitted by the authors in English.     

Thermal degradation kinetics of polyimide containing 2,6-benzobisoxazole units

A novel polyimide (PI) based on 2,6-bis(p-aminophenyl)-benzo[1,2-d;5,4-d′]bisoxazole has been synthesized via a conventional two-stage procedure with bis(ether anhydrides) (HQDPA). The intermediate poly(amic acid) had inherent viscosities of 1.70 dl/g and could be thermally converted into light yellow polyimide film. The resulted polyimide showed excellent thermal stability, and the glass transition temperatures (T_g) were above 283 °C, the 5% weight loss temperature of the polymer was at 572 °C in N₂. The thermal degradation of the polyimide was studied by thermogravimetric analysis (TGA) in order to determine the actual reaction mechanisms of the decomposition process. The activation energy of the solid-state process was determined using Flynn-Wall-Ozawa method, which does not require knowledge of the reaction mechanism, which resulted to be 361.36 kJ/mol. The activation energy of different mechanism models and pre-exponential factor (A) were determined by Coats-Redfern method. Compared with the value obtained from the Ozawa method, the actual reaction mechanism obeyed nucleation and growth model, Avrami-Erofeev function (A₃) with integral form g(X) = [−ln(1−X)]³.     

Anion and Additive Effects on the Structure of Mercury(II) Halides Complexes with Tripodal Ligand

The metal complexes [Hg₂(tbim)₂Br₄]·2DMF ( 1 ) and [Hg₂(tbim)I₄]·1.5DMF ( 2 ) were prepared by reactions of 1,3,5‐tris(benzimidazol‐1‐ylmethyl)‐2,4,6‐trimethylbenzene (tbim) with HgBr₂, HgI₂, respectively, and [Hg₂(tbim)I₄]·0.5(FeCp₂)·H₂O ( 3 ) was obtained by the same method with addition of ferrocene (FeCp₂) as additive. Their structures were determined by X‐ray crystallographic analyses. Complex 1 has a macrocyclic binuclear structure with one benzimidazole arm of the ligand free of coordination and the binuclear units are further connected by C‐H···N hydrogen bonds to give an infinite zigzag chain. Complexes 2 and 3 have a 2D network structure in which tbim serves as a tridentate ligand. The results showed that the halides of bromide and iodide have remarkable impact on the structure of the complexes. The FeCp₂ molecules are trapped in the voids of framework 3 .     

Single Atoms of Iron on MoS2 Nanosheets for N2 Electroreduction into Ammonia

Efforts have been devoted to achieving a highly efficient artificial synthesis of ammonia (NH₃). Reported herein is a novel Fe-MoS₂ catalyst with Fe atomically dispersed onto MoS₂ nanosheets, imitating natural nitrogenase, to boost N₂ electroreduction into NH₃ at room temperature. The Fe-MoS₂ nanosheets exhibited a faradic efficiency of 18.8 % with a yield rate of 8.63 μg mg_cat.⁻¹ h⁻¹ for NH₃ at −0.3 V versus the reversible hydrogen electrode. The mechanism study revealed that the electroreduction of N₂ was promoted and the competing hydrogen evolution reaction was suppressed by decorating the edge sites of S in MoS₂ with the atomically dispersed Fe, resulting in high catalytic performance for the electroreduction of N₂ into NH₃. This work provides new ideas for the design of catalysts for N₂ electroreduction and strengthens the understanding about N₂ activation over Mo-based catalysts.     

Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10

In the present study, the competitive adsorption characteristics of binary and ternary heavy metal ions Pb2+, Cu2+, and Cd2+ on microporous titanosilicate ETS-10 were investigated in batch systems. Pure microporous titanosilicate ETS-10 was synthesized with P25 as the Ti source and characterized by the techniques of X-ray diffraction (XRD), field emission-scanning electron microscope (FESEM), nitrogen adsorption, and zeta-potential. Equilibrium and kinetic adsorption data showed that ETS-10 displays a high selectivity toward one metal in a two-component or a three-component system with an affinity order of Pb2+ > Cd2+ > Cu2+. The equilibrium behaviors of heavy metals species with stronger affinity toward ETS-10 can be described by the Langmuir equation while the adsorption kinetics of the metals can be well fitted to a pseudo-second-order (PSO) model.     

双功能型嵌入镍纳米颗粒的碳棱柱状微米棒电极用于电化学甲醇氧化助力的节能产氢

With the rapid development of human society, clean energy forms are imperative to sustain the normal operations of various mechanical and electrical facilities under a cozy environment. Hydrogen is considered among the most promising clean energy sources for the future. Recently, electrochemical water splitting has been considered as one of the most efficient approaches to harvest hydrogen energy, which generates only non-pollutant water on combustion. However, the sluggish anodic oxygen evolution reaction significantly restricts the efficiency of water splitting and requires a relatively high cell voltage to drive the electrolysis. Therefore, seeking a thermodynamically favorable anodic reaction to replace the sluggish oxygen evolution reaction by utilizing highly active bifunctional electrocatalysts for the anodic reaction and hydrogen evolution are crucial for achieving energy-efficient hydrogen production for industrial applications. Nevertheless, it is known that the oxygen evolution reaction can be replaced with other useful and thermodynamically favorable reactions to reduce the electrolysis voltage for realizing energy-efficient hydrogen production. Therefore, in this study, we present a bifunctional nickel nanoparticle-embedded carbon (Ni@C) prism-like microrod electrocatalyst synthesized via a two-step method involving the synthesis of a precursor metal-organic framework-74 and subsequent carbonization treatment for methanol oxidation and hydrogen evolution. The interfacial structure consisting of a nickel and carbon skeleton was realized via in situ carbonization. However, the dispersed nickel nanoparticles do not easily aggregate owing to the partition by the surrounding carbon as it would sufficiently expose the active Ni sites to the electrolytes, ensuring fast charge transfer between the catalyst and electrolytes by accelerating the electrochemical kinetics. In the anodic methanol oxidation, the products were detected as carbon dioxide and formate with faradaic efficiencies of 36.2% and 62.5%, respectively, at an applied potential of 1.55 V. Meanwhile, the Ni@C microrod catalyst demonstrated high activity and durability (2.7% current decay after 12 h of continuous operation) toward methanol oxidation, which demonstrates that methanol oxidation precedes oxidation under voltage forces. Notably, the bifunctional catalyst not only exhibits excellent performance toward methanol oxidation but also yields a low overpotential of 155 mV to drive 10 mA∙cm⁻² toward hydrogen evolution in 1.0 mol∙L⁻¹ KOH aqueous solution with 0.5 mol∙L⁻¹ methanol at room temperature, which guarantees the hydrogen production efficiency. More importantly, the constructed two-electrode electrolyzer produced a current density of 10 mA∙cm⁻² at a low cell voltage of 1.6 V, which decreased by 240 mV after replacing the oxygen evolution reaction with methanol oxidation.