Study of alkyl chain length dependent characteristics of imidazolium based ionic liquids [CnMIM]+[TFSA]− by Brillouin and dielectric loss spectroscopy

This study examined the acoustic phonon mode of ionic liquids consisting of 1-alkyl-3-methyl-imidazolium family (C_nMIM) cations with n values ranging from 2 to 10 and bis(trifluoromethylsulfonyl)amide (TFSA) anion in the temperature range from 300 K to 100 K. [C_nMIM]⁺[TFSA]^? showed depolarized (VH) components of Brillouin peaks at temperatures below the glass transition temperature when n is larger than 4. On the other hand, in the case of ionic liquids with different anions, such as [C₄MIM]⁺[BF₄]^?, [C₄MIM]⁺[PF₆]^? and [C₈MIM]⁺[BF₄]^?, the VH component of Brillouin peaks was not observed in the temperature range investigated. The dielectric loss spectra showed that the temperature dependence of alkyl chain domain relaxation of all ionic liquids followed the Arrhenius law and showed an increase in activation energy at the temperature where the VH component of Brillouin peak appeared. These results suggest that the observed depolarized component of Brillouin peak might originate from uniquely induced polarization in the 2nd domain composed of head groups of cations and anions.     

A Note on Shiffman's Theorems

Shiffman proved his famous first theorem, that if A R³ is a compact minimal annulus bounded by two convex Jordan curves in parallel (say horizontal) planes, then A is foliated by strictly convex horizontal Jordan curves. In this article we use Perron's method to construct minimal annuli which have a planar end and are bounded by two convex Jordan curves in horizontal planes, but the horizontal level sets of the surfaces are not all convex Jordan curves or straight lines. These surfaces show that unlike his second and third theorems, Shiffman's first theorem is not generalizable without further qualification.     

Microstructures and soft magnetic properties of Fe80P20-xSix (x = 4.5–6.5) amorphous ribbons

Fe-based amorphous ribbons with excellent soft magnetic properties and mechanical properties were prepared in the Fe–Si–P ternary system. Enhanced soft magnetic properties could be achieved through annealing treatment of the ribbons for 1 h at 325 °C, which is far below the glass transition temperatures (462–474 °C). Icosahedral medium-range ordering with a size range of around 2 nm occurred throughout the amorphous matrix during the low-temperature annealing treatment. The annealed ribbons exhibited improved magnetic saturation of over 185 emu/g while maintaining good mechanical flexibility. During icosahedral ordering, the distance between the Fe atoms and the coordination number within the amorphous ribbon can be optimised for achieving high magnetic saturation. However, nanocrystallisation of the SiP and Fe₂P transition phases embedded within the amorphous matrix occurred after the annealing treatment for 1 h at 385 °C, which caused deterioration of the soft magnetic properties and mechanical flexibility of the ribbons. Therefore, the combination of high magnetic saturation and mechanical flexibility of the amorphous ribbons could be optimised through low-temperature annealing treatment without any nanocrystallisation.     

Higher Fock Sectors in the Wick-Cutkosky Model

In the Wick-Cutkosky model we analyze nonperturbatively, in light-front dynamics, the contributions of two-body and higher Fock sectors to the total norm and electromagnetic form factor. It turns out that two- and three-body sectors always dominate. For a maximal value of the coupling constant α = 2π, corresponding to the zero bound-state mass M = 0, they contribute 90% to the norm. With decrease of α the two-body contribution increases up to 100%. The form factor asymptotic is always determined by a two-body sector.     

A possible role of amorphous regions at grain-boundary vertex points as linear defects on flux pinning in MgB2 films with columnar grain structure

We measured the transport properties of MgB₂ films having columnar grain structure with their axis normal to the substrate. When an external magnetic field was applied parallel to the grain axis, an enhanced critical current density has been observed, and this result has been ascribed to flux pinning induced by grain boundaries. The shape of the angular dependence of critical current density and its magnetic field dependence showed a quite similar resemblance to those of YBa₂Cu₃O_x films containing columnar defects, implying a possible existence of linear defects in MgB₂ films of columnar structure. We propose that the amorphous regions at the vertex points of three or more grain boundaries observed in microstructural studies correspond to the linear defects and these linear defects anchor the end points of the flux line dislocations of Frank-Read sources, by which the shear in the flux line lattice is actuated. This assumed mechanism is found to reasonably explain the magnetic field dependence of the flux pinning force density of MgB₂ films with columnar grain structure.     

Photoelectrochemical cells using metal-decorated carbon nanotube electrodes

We fabricated the photoelectrochemical (PEC) cells using n-type TiO₂ and metal (Pt, Pd)-decorated carbon nanotubes (CNTs) as an anode and a cathode, respectively. Photovoltaic effects were clearly observed. Compared with conventional PEC cell with Pt cathode, a larger photo-voltage was found in the PEC cells with the metal-decorated CNT cathode due to p-type semiconducting properties of CNTs. Additionally, we connected two PEC cells in series to decompose water into oxygen and hydrogen. Indeed, the connected PEC cells yielded the photo-voltage of about 1.35 V, which is larger than 1.23 V required for water splitting. This result demonstrates the possibility of hydrogen generation using the connected PEC cells without an external bias.     

Interaction of Ag with the Si(1 1 1)1 × 1–H surface

Synchrotron radiation based photoemission spectroscopy (SRPES) and low energy electron diffraction (LEED) are used to study the interaction between Ag atoms and the Si(1 1 1)1 × 1–H surface. At an Ag coverage of 0.063 monolayers (ML) on the Si(1 1 1)1 × 1–H surface, the Si 2p component corresponding to Si–H bonds decreases, and an additional Si 2p component appears which shifts to a lower binding energy by 109 meV with respect to the Si bulk peak. The new Si 2p component is also observed for 0.25 ML Ag on the Si(1 1 1)7 × 7 surface. These findings suggest that Ag atoms replace the H atoms of the Si(1 1 1)1 × 1–H surface and form direct Ag–Si bonds. Contrary to the widely accepted view that there is no chemical interaction between Ag particles and the H-passivated Si surface, these results are in good agreement with recent first-principles calculations.     

Trojan Horse Attack Free Fault-Tolerant Quantum Key Distribution Protocols Using GHZ States

Recently, Yang and Hwang (Quantum Inf. Process. 13(3): 781–794, 19) proposed two fault-tolerant QKD protocols based on their proposed coding functions for resisting the collective noise, and their QKD protocols are free from Trojan horse attack without employing any specific detecting devices (e.g., photon number splitter (PNS) and wavelength filter). By using four-particle Greenberger-Horne-Zeilinger (GHZ) state and four-particle GHZ-like state in their proposed coding functions, Yang and Hwang’s QKD protocols can resist each kind of the collective noise–collective-dephasing noise, collective-rotation noise. However, their proposed coding function can be improved by the utilization of three-particle GHZ state (three-particle GHZ-like state) instead of four-particle GHZ state (four-particle GHZ-like state) that will eventually reduce the consumption of the qubits. As a result, this study proposed the improved version of Yang and Hwang’s coding functions to enhance the qubit efficiency of their schemes from 20 % to 22 %.     

Multi-Party Quantum Private Comparison Protocol with an Almost-Dishonest Third Party using GHZ States

This article proposes an innovative quantum private comparison (QPC) protocol for n users using GHZ states, where an almost-dishonest third party (TP) is introduced to assist the participants for comparing their secrets. It is argued that as compared to the existing QPC protocols our proposed scheme has some considerable advantages. First, in the existing QPC protocols, the TP can only to determine whether all participants’ secrets are equal or not. Instead of that, in our proposed scheme a TP can even compare the secrets between any subsects of users. Second, since our proposed scheme is based on GHZ state; hence it can ensure higher efficiency as compared to other existing multi-party QPC protocols on d-dimension photons.     

Identification of rat urinary glycoproteome captured by three lectins using gel and LC-based proteomics

Many different types of urine proteome studies have been done, but urine glycoprotein studies are insufficient. Therefore, we studied the glycoproteins from rat urine, which could be used to identify biomarkers in an animal model. First, urinary proteins were prepared by using the dialysis and lyophilizing methods from rat urine. Glycoproteins enriched with lectin affinity purification, concanavalin A, jacalin and wheat germ agglutinin from the urinary proteins were separated by means of reverse-phase fast protein LC (FPLC) or 1-D PAGE. Each FPLC fraction and 1-D PAGE gel band were trypsin-digested and analyzed by means of nanoLC-MS/MS. LC-MS/MS analyses were carried out by using linear ion trap MS. A total of 318 rat urinary glycoproteins were identified from the FPLC fractions and gel bands; approximately 90% of identified proteins were confirmed as glycoproteins in Swiss-Prot. Many glycoproteins, known as biomarkers, including C-reactive protein, uromodulin, amyloid beta A4 protein, alpha-1-inhibitor 3, vitamin D-binding protein, kallikrein 3 and fetuin-A were identified in this study. By studying urinary glycoproteins collected from rat, these results may help to assist in identifying urinary biomarkers regarding various types of disease models.