Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

A new route for synthesizing cholesterol analogs with fluorocarbon side chains and their liquid-crystalline aliphatic esters

A new and efficient route has been developed to synthesize 17β-(1-methyl-3-perfluoroalkyl)propyl-3β-androsterol (1) in nine steps from hyodeoxycholic acid via selective addition of 1-perfluoroalkyl iodide to 24-norchola-5,22-dien-3β-ol. From (1), the first series of steroidal liquid crystalline aliphatic esters (smectic A) with fluorocarbon side chains has been prepared.     

Orbital Configuration of the Valence Electrons, Ligand Field Symmetry, and Manganese Oxidation States of the Photosynthetic Water Oxidizing Complex: Analysis of the S(2) State Multiline EPR Signals

A theoretical framework is presented for analysis of all three "multiline" EPR spectra (MLS) arising from the tetramanganese (Mn(4)) cluster in the S(2) oxidation state of the photosynthetic water oxidizing complex (WOC). Accurate simulations are presented which include anisotropy of the g and (four) (55)Mn hyperfine tensors, chosen according to a database of (55)Mn(III) and (55)Mn(IV) hyperfine tensors obtained previously using unbiased least-squares spectral fitting routines. In view of the large (30%) anisotropy common to Mn(III) hyperfine tensors in all complexes, previous MLS simulations which have assumed isotropic hyperfine constants have required physically unrealistic parameters. A simple model is found which offers good simulations of both the native "19-21-line" MLS and the "26-line" NH(3)-bound form of the MLS. Both a dimer-of-dimers and distorted-trigonal magnetic models are examined to describe the symmetry of the Heisenberg exchange interactions within the Mn(4) cluster and thus define the initial electronic basis states of the cluster. The effect of rhombic symmetry distortions is explicitly considered. Both magnetic models correspond to one of several possible structural models for the Mn(4) cluster proposed independently from Mn EXAFS studies. Simulated MLS were constructed for each of the eight (or seven) doublet states of the Mn(4) cluster in the WOC for the two viable oxidation models (3Mn(III)-1Mn(IV) or 3Mn(IV)-1Mn(III)), and using a wide range of axial Mn hyperfine tensors, with either coaxial or orthogonal tensor alignments. We find accurate simulations using the 3Mn(III)-1Mn(IV) oxidation model. In the dimer-of-dimers coupling model, the spin state conversion between two doublet states |S(12),S(34),S(T)|(7)/(2),4,(1)/(2)> and |(7)/(2),3,(1)/(2)> is found to explain the large (25%) contraction in the hyperfine splitting observed upon conversion from the native MLS to the NH(3)-bound MLS. Stabilization of this excited state as the new ground state is caused by change in the intermanganese exchange coupling, without appreciable change in the intrinsic hyperfine tensors. The lack of good simulations of the Ca(2+)-depleted MLS suggests that Ca(2+)-depletion changes both Mn ligation and intermanganese exchange coupling. The 3Mn(IV)-1Mn(III) oxidation model is disfavored because only approximate simulations could be found for the native MLS and no agreement with the NH(3)-bound MLS was obtained. The scalar part of the hyperfine tensors for both Mn(III) and Mn(IV) ions were found to approximate (+/-5%) the values for the dimanganese(III,IV) catalase enzyme, suggesting similar overall ligand types. However, the large (30%) anisotropic part of the Mn(III) hyperfine interaction is opposite in sign to that found in all tetragonally extended six-coordinate Mn(III) ions (i.e., the usual Jahn-Teller splitting). The distribution of spin density from the high-spin d(4) electron configuration of each Mn(III) ion corresponds to a flattened (oblate) ellipsoid. This electronic distribution is favored in five-coordinate ligand fields having trigonally compressed bipyramidal geometry, but it could also arise, in principle, in strained six-coordinate ligand fields having tetragonally compressed geometry, i.e. [Mn(2)(&mgr;-O)](4+) (reverse Jahn-Teller distortion). The resulting valence electronic configurations are described as e'(2)e"(2) and (d(pi))(3)(d(x)()()2(-)(y)()()2)(1), respectively, in contrast to the (d(pi))(3)(d(z)()()2)(1) configuration common to unstrained six-coordinate tetragonally-extended Mn(III) ions, such as found in the [Mn(2)(&mgr;-O)(2)](3+) core in several synthetic dimers and catalase. Both of the former geometries predict strongly oxidizing Mn(III) ions, thereby suggesting a structural basis for the oxidative reactivity of the Mn(4) cluster in the WOC. The magnetic model needed to explain the MLS is not readily reconciled with the simplest structural and electronic models deduced from EXAFS studies of the WOC.     

Studies of the g factors and zero-field splitting for the trigonal Ti(2+)(Ga)-S(p) defect center in GaP crystal

The EPR g factors g(parallel), g(perpendicular) and zero-field splitting D suggested to be caused by a donor-acceptor nearest-neighbour pair defect [Ti(Ga)(2+)-Sp] in GaP:Ti(2+) co-doped with sulphur are calculated from the high-order perturbation formulas based on a two spin-orbit coupling parameter model for the EPR parameters of 3d(2) ion in trigonal symmetry. The calculated results are close to the observed values. The suggestion of [Ti(Ga)(2+)-Sp] pair defect in GaP:Ti co-doped with sulphur is also confirmed from this calculation.     

Solvent effects on infrared spectra of methyl 4-hydroxybenzoate in pure organic solvents and in ethanol/CCl4 binary solvents

Infrared spectroscopy studies of methyl 4-hydroxybenzoate (MHB) in 17 different organic solvents and in ethanol/CCl4 binary solvent were undertaken to investigate the solvent-solute interactions. The frequencies of carbonyl stretching vibration nu(C=O) of MHB in single solvents were correlated with the solvent acceptor number (AN) and the linear solvation energy relationships (LSER). The assignments of the two bands of nu(C=O) of MHB in alcohols and the single one of that in non-alcoholic solvents were discussed. The shifts of nu(C=O) of MHB in ethanol/CCl4 binary solvents showed that several kinds of solute-solvent hydrogen bonding interactions coexisted in the mixture solvents, with a change in the mole fraction of ethanol in the binary solvents.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Near-infrared fluorimetric determination of nucleic acids by shifting the ion-association equilibrium between heptamethylene cyanine and Alcian blue 8GX

A new method based on near-infrared (near-IR) fluorescence recovery, employing a two-reagent system which is composed of an anionic heptamethylene cyanine (HMC) and a polycationic phthalocyanine dye, Alcian blue 8GX, is presented for the determination of nucleic acids. With a maximum excitation wavelength at 766 nm and a maximum emission wavelength at 796 nm, the fluorescence recovery is linear with the concentration of nucleic acids added. Factors including the acidity of the medium, the reaction time, the optimal ratio of the two reagents, as well as the influence of foreign substance were all investigated. Meanwhile, the mechanism of fluorescence recovery was also studied. Under the optimal conditions, the linear ranges of the calibration curves were 10-250 ng ml⁻¹ for calf thymus DNA (CT DNA) and 10-200 ng ml⁻¹ for yeast RNA. The detection limits were 6.8 ng ml⁻¹ for CT DNA and 6.3 ng ml⁻¹ for yeast RNA, respectively. The method has been applied to the analysis of practical samples and the recovery results were satisfactory.     

Study on the interaction of platinum(IV), gold(III) and silver(I) ions with DNA

Fluorescence, absorption spectra have been produced by the interaction of platinum(IV), silver(I) and gold(III) ions with the berberine–DNA system (berberine, Scheme 1). Platinum(IV) and gold(III) ions show different effects from that of silver(I) ion on the spectral characteristics of the berberine–DNA system. Quenching fluorescence is seen with platinum(IV) and gold(III) ions addition, whereas increasing fluorescence is observed for silver(I) ions. The addition of gold(III) and silver(I) ions cause an increase in absorption of the berberine–DNA system. The above results suggest that different metal ions exhibit different affinities when binding to DNA correlates well with the ions’ charge, structure and the coordination ability.     

Rational principles of compound selection for combinatorial library design

It is practically impossible in a short period of time to synthesize and test all compounds in any large exhaustive chemical library. We discuss rational approaches to selecting representative subsets of virtual libraries that help direct experimental synthetic efforts for both targeted and diverse library design. For targeted library design, we consider principles based on the similarity to lead molecules. In the case of diverse library design, we discuss algorithms aimed at the selection of both diverse and representative subsets of the entire chemical library space. We illustrate methodologies with several practical examples.