Variation of the Payne Effect in Natural Rubber Reinforced by Graft-Modified Carbon Black

Carbon black (CB) was modified by liquid grafting and used for natural rubber (NR) reinforcement. Payne effects during NR reinforcement by the graft-modified carbon black (GCB) were analyzed in this paper. The results showed a proportional relationship between filler content and the Payne effect. Rubber compounds with GCB presented weaker Payne effects than their non-modified counterparts. Qualitative analysis of the correlation between filler network structure and filler content was conducted according to the relationship between bound rubber of a rubber compound and shear modulus. The impact of the storage period on the Payne effect was further studied, and the results demonstrated that the longer the storage period of the rubber compound, the stronger the Payne effect tended to be. The mechanisms by which the Payne effects were manifested differed according to the content of the filler in the rubber.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

RF and field measurements of the SSC-LINAC RFQ

The 53.667 MHz continuous-wave heavy ion RFQ has been designed and manufactured for the SSC-LINAC project.This four-rod RFQ accelerates ions with maximum mass to charge ratio of 7 from 3.728 keV/u to 143 keV/u.Measurements have been carried out to check the RF performance of the cavity and the quality of the electric field.The S11 of the power coupler is adjusted to better than-44 dB,and the Q0 of the cavity is 6440.The quality of the electric field is evaluated by the perturbation method.The measurement procedure and data analysis will be discussed in detail.The error due to gravity of the perturbation bead has been corrected by averaging the fields in different quadrants.As a result,the unflatness of the electric field is±2.5%,and the dipole field component distributes from 0%to 20%in different longitudinal positions,which indicates the asymmetry of the quadrupole field.The unflatness of the quadrupole field distribution represents a good agreement with the simulation results.High power RF test and beam commissioning of the RFQ are on schedule in early 2014.     

Nonclassicality and Decoherence of the Variable Arcsine State in a Thermal Environment

A kind of non-Gaussian state—variable arcsine state is studied by using the input-output theories which relate the statistical properties of the output field to those of the input field. The variable arcsine state (VAS) is generated by using a variable beam splitter (BS), which means that the transmissivity (reflectivity) of the BS is adjustable continuously. The nonclassicality is investigated by studying the negativity of Wigner function (WF). It is shown that the variable arcsine state has negative values of WF when transmissivity is not equal to 1 or 0. The decoherence effect of the VAS is then studied by analytically deriving the time evolution formula of WF.     

Teleportation of three-dimensional single particle state in noninertial frames

Considering the spin degree of freedom of the Dirac field, we study the entanglement behavior of a different class of communication channel and teleportation of three-dimensional single particle state in noninertial frames. Numerical analysis shows that the communication channel in our scheme can offer enough distillable entanglement for the teleportation protocol. Moreover, the teleportation protocol could work well if Rob＇s acceleration is not very big, but the fidelity of the teleportation is still reduced due to the Unruh effect.     

立方铂纳米粒子的形状变化与熔化特性的分子动力学研究

采用分子动力学方法结合嵌入原子多体势,对立方铂纳米粒子的热稳定性进行了模拟研究.计算结果表明,立方纳米粒子在升温过程中首先转变为由{111}和{100}面所构成的十四面体,然后再转变为球形,最后熔化为液态.通过计算立方铂钠米粒子的统计半径,发现形状转变温度在1250 K左右.尽管形状不同,立方纳米粒子和球形纳米粒子的熔点是相同的. 关键词： 纳米粒子 热稳定性 分子动力学     

基于拓扑结构的碱金属化合物摩尔磁化率的支持向量回归研究

基于经典电动力学导出的表征简单离子磁化率的磁性点价g_i所构建的分子磁性连接性指数?^mF及45种碱金属化合物的摩尔磁化率χ_m的实测数据集,利用粒子群寻优的支持向量回归（SVR）方法,建立了基于⁰F和¹F的碱金属化合物χ_m的预测模型,并与基于多元线性回归（MLR）模型的计算结果进行了比较.结果显示,基于9次交叉验证的SVR模型预测的平均绝对误差、平均相对误差绝对值以及均方根误差均比MLR模型小,表明SVR模型的回归预测能力优于MLR.研究表明,磁性连接性指数^mF是一种合适的分子描述符,SVR是一种预测碱金属化合物χ_m的有效方法. 关键词： 碱金属化合物 摩尔磁化率 支持向量回归 预测     

自旋场效应晶体管的原理和研究进展

基于电子具有自旋的特性,介绍了自旋场效应晶体管的基本原理和研究进展;通过研究发现自旋场效应晶体管具有良好的电导开关效应,外加磁场后则呈现出磁开关效应．     

Microwave dielectric and magnetic properties of superparamagnetic 8-nm Fe3O4 nanoparticles

The superparamagnetic 8-nm Fe₃O₄ nanoparticles were successfully prepared by chemical oxidation process. For the complex permittivity, the dual dielectric relaxation processes have been proved by two overlapped Cole–Cole semicircles, and the natural resonance frequency is 3.03 GHz for the complex permeability. The maximum reflection loss value reaches −55.5 dB at 6.11 GHz with 3.85 mm in the thickness of the absorbers for the superparamagnetic 8-nm Fe₃O₄ nanoparticles which is better than that of 150 nm and 30 nm Fe₃O₄ nanoparticles. It is believed that the superparamagnetic 8-nm Fe₃O₄ nanoparticles can be used as a kind of candidate for microwave absorber.