基于扩频码的单载波迭代频域均衡水声通信

单载波时域均衡在长时延扩展水声信道中计算量大,并对接收机参数的选择较为敏感,可靠性低,而正交频分复用信号峰均功率比高、对频率偏移敏感. 针对这些问题,提出基于扩频码的单载波块传输高速率水声通信方法和基于T/4分数间隔迭代频域均衡的接收机算法. 该接收机利用已知扩频码进行信道估计以及对由多普勒偏移引起的旋转相位进行估计,并通过一种低复杂度迭代频域均衡算法改善系统性能. 开展了湖上实验研究,结果表明在浅水1.8 km距离且复杂多径干扰条件下,利用BPSK/QPSK调制可实现10^-2–10^-4的误码率并达到1500–3000 bit/s的有效数据率. 关键词： 水声通信 单载波 频域均衡 迭代处理     

The Effect of OMMT on the Morphology and Mechanical Properties of PVC/ABS Blends

Poly(vinyl chloride) (PVC)/acrylonitrile-butadiene-styrene (ABS) blends containing organically modified montmorillonite (OMMT) were prepared using a twin-screw extruder followed by injection molding. The OMMT dispersion was evaluated by X-ray diffraction and transmission electron microscopy. The clay was preferentially situated in the PVC phase and across the interfaces of PVC/ABS. The effect of the addition of OMMT on the morphology and mechanical properties was also evaluated. Scanning electron microscopy revealed a large reduction in domain size when OMMT was used. The mechanical properties were studied through tensile and impact tests. The yield stress increased when an appropriate amount of OMMT was used without impairing the impact strength.     

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

The effect on the notched Izod impact strength of poly(butylene terephthalate) (PBT) by blending it with acrylonitrile-styrene-acrylate (ASA) was examined. Epoxy resin (ER) was demonstrated to be an efficient compatibilizer for the partially compatible blends of PBT/ASA. It requires only a very small amount of ER to improve the toughness of the PBT/ASA blends drastically. Furthermore, there exists an optimum proportion of ER added to achieve maximum notched Izod impact strength. Transmission electron microscopy (TEM) observation suggests that the ER in the PBT/ASA/ER blends suppressing the tendency of coalescence of ASA, leading to better dispersion of the ASA particles. Field emission scanning electron microscopy (FESEM) shows that ER enhances the phase dispersion and the interfacial adhesion between the PBT and ASA phases, it improves the compatibility between PBT and ASA. The compositions in the interphase was continuous, which results in multiphase composites with a graded interphase. It is suggested that enhanced interphase adhesion was necessary to obtain improved dispersion, fine phase morphology, and better toughness.     

Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.     

Improved Performance of On-line Atom Trapping in Flame Furnace Atomic Absorption Spectrometry by Chemical Vapor Generation: Determination of Cadmium in High-Salinity Water Samples

ABSTRACT

On-line atom trapping inside a nickel flame furnace using chemical vapor generation for sample introduction was proposed for the determination of trace cadmium by flame atomic absorption spectrometry (AAS). Cadmium volatile species was generated upon reaction with potassium borohydride and then flushed into a flame furnace for on-line trapping by a flow of nitrogen carrier gas. The middle part of the flame furnace, where the carrier gas impacts, is cooled by the gas flow, and this provides a fine strategy for on-line atom trapping for the purpose of preconcentration. A stainless steel plate is put on the top of the flame burner in the middle to form a flame-free zone, which also greatly lowers the temperature of the flame furnace and facilitates the atom-trapping process. Due to the introduction of chemical vapor generation, matrix effect was greatly alleviated compared with direct pneumatic nebulization for on-line atom trapping in flame furnace AAS. With trapping time of 35 s, the current approach achieved an excellent limit of detection of 20 ng L^?1. The proposed method was successfully applied for the quantification of cadmium in high-salinity samples.     

A comparative in vitro study of the digestibility of heat- and high pressure-induced gels prepared from industrial milk whey proteins

We undertook this study to compare the digestibility of heat- and high pressure-induced gels produced from whey protein isolate (WPI). To simulate in vivo gastrointestinal digestion of WPI gels, a pepsin–trypsin digestion system was used. The in vitro protein digestibility of WPI gels induced by high pressure (400 MPa and 30 min; P-gel) and those induced by heat (80°C and 30 min; H-gel) was compared using a protein concentration of 0.14 g mL^?1. The in vitro protein digestibility of P-gels was significantly greater than that of H-gels (p<0.05). The size-exclusion chromatography profiles of the hydrolysates showed that the P-gel generated more and smaller peptides than natural WPI and H-gels. Furthermore, Sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis showed some soluble disulfide-mediated aggregation in the P-gel, while there was more insoluble aggregation in the H-gel than the P-gel. The P-gel was more sensitive to proteinase than the H-gel, which was related to the content of S–S bonds, and this in turn could be attributed to the differences in the gelation mechanism between the H-gel and P-gel.     

Performance characteristics of single photon pulse ranging system using Monte Carlo simulation

Single photon pulse ranging system with extremely high sensitivity has been widely used in distance measurement and 3D imaging. To analyze the factors that affect the measurement precision and accuracy will help to improve system performance. According to system structure and principle, we mainly discussed the following factors: laser intensity, pulse width, detection efficiency and time jitter. A simulation model based on Monte Carlo stochastic method was constructed in this paper, and we get the specific influence of factors on measurement precision and accuracy by simulation. Finally, we set up laboratory experiment system and took effective experiments on ranging precision and accuracy.     

Spin-flip Fano–Kondo resonant tunneling through a quantum dot interferometer responded by a rotating magnetic field

The Fano and Kondo cooperated resonant tunneling through a quantum dot interferometer under the perturbation of a rotating magnetic field is investigated theoretically. The spin-polarized current components have been derived generally by employing the Keldysh nonequilibrium Green?s function method, through which the charge and spin currents are determined directly. The numerical calculations on spin and charge currents are performed to show the compound features of mesoscopic transport associated with the Kondo, Fano, and Zeeman effects intimately. The induced spin current in the Kondo regime is much different from the one in the non-interacting regime. The spin current is tuned from resonant peak to valley by varying external parameters.     

Cantor-type cylindrical-coordinate method for differential equations with local fractional derivatives

In this Letter, we propose to use the Cantor-type cylindrical-coordinate method in order to investigate a family of local fractional differential operators on Cantor sets. Some testing examples are given to illustrate the capability of the proposed method for the heat-conduction equation on a Cantor set and the damped wave equation in fractal strings. It is seen to be a powerful tool to convert differential equations on Cantor sets from Cantorian-coordinate systems to Cantor-type cylindrical-coordinate systems.