Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

A study of carboxylic-modified mesoporous silica in controlled delivery for drug famotidine

A series of pure silica MSU and carboxylic-modified MSU materials were prepared. The formation of mesoporous silica materials with terminal carboxylic groups on pore surface was performed by the acid-catalyzed hydrolysis of cyano to carboxylic. Then their potential applications in controlled drug delivery carriers were investigated. Drug famotidine was selected as a model molecule out of the consideration of the terminal amino groups in its molecule. The adsorption experiments show significant adsorption of famotidine on the carboxylic-modified MSU materials. And, the functionalization level of carboxylic groups has been found to be the key factor affecting the adsorption capacities of the modified MSU materials for famotidine. Subsequently, three kinds of release fluids, including simulated gastric medium, simulated intestinal medium, and simulated body fluid, were used to test the famotidine release rate from the carboxylic-modified MSU material. Obvious delayed effect has been observed for the famotidine release from the carboxylic-modified mesoporous silica material under the in vitro assays.     

Micellization and morphological characterization of Ag-micelles prepared by poly(vinyl acetate)–silver nitrate in solvent/nonsolvent system

The inducing method for preparing Ag-micelle solution with the use of mixed solvent/nonsolvent, and the morphological characterization of the generated metal–micelles were investigated and reported in this paper. In this method, an Ag containing metal chelate polymer (MCP) raw solution was preprepared by dissolving poly(vinyl acetate) (PVAc)–silver nitrate (AgNO₃) MCP in conc. formic acid, and a mixed solvent of HCOOH/H₂O with specific water composition was then added to induce the micellization of the MCP chain. The critical water concentration (CWC) that was needed for inducing the formation of the Ag-micelles, and the water concentration at which the flocculation of the Ag-micelles occurred in micellar solution, were studied by measuring the transmittance of the dilute MCP solution; the results showed that a long-lasting MCP solution with stable micelles might be prepared by using a H₂O/HCOOH solvent of specific weight ratio 1:1.2. The effect of the AgNO₃ concentration on the morphology of the Ag-micelles was also investigated by transmission electron microscopy (TEM). At AgNO₃ concentration below 0.5 wt%, the Ag-micelles displayed a variety of core-shell structure; but as the AgNO₃ concentration was increased to 1.0–2.0 wt%, micelles that had Ag-solid embedded in the micellar core were observed.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Interference of Copper(II) ions with Non-covalent Interactions in Uridine or Uridine 5′-Monophosphate Systems with Adenosine,Cytidine, Thymidine and their Monophosphates in Aqueous Solution

Coordination reactions of copper(II) ions and their effect on non-covalent interactions in uridine (Urd) or uridine 5′-monophosphate (UMP) systems with nucleosides (Ado, Cyd, Thd) and nucleotides (AMP and CMP) in aqueous solutions have been studied. At high pH the effective coordination centers are deprotonated N(3) atoms from Urd and Thd, whereas at low pH, the N(3) atoms of pyrimidine nucleosides are blocked for coordination and the metallation sites are endocyclic nitrogen atoms from Ado, Cyd, AMP and CMP. Moreover, at low pH, the main reaction center in nucleotide solutions is the phosphate group. The NMR study has proven the occurrence of non-covalent ion-dipole interactions and stacking interactions in the systems considered. Introduction of a copper ion in the majority of systems causes the disappearance of weak interactions between ligands. The structures of the complexes in solution have been inferred from the equilibrium study: an analysis of the pH range of their occurrence with respect to the pH range of deprotonation of particular groups in the compounds studied, using Vis, EPR and ¹³C as well as ³¹P NMR spectral analysis.     

Fast Marching Method for Calculating Reactive Trajectories for Chemical Reactions

We present a method for computing classical Newtonian trajectories that minimize the path length or transit time from reactant to product. Our approach is based on a generalization of the fast-marching method, which allows us to construct the solution of the Hamilton-Jacobi equation for the action that optimizes the desired quantity. The resulting “reactive paths” can be interpreted as reaction coordinates but, unlike more conventional choices, they contain dynamical information about the chemical system of interest.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Ab initio and infrared spectral study of 4′-substituted phenylthiolbenzoates

The geometry of the 4′-cyano-(4′-CNPTB) and the 4′-methoxy-(4′-MePTB) phenylthiolbenzoates were obtained by ab initio calculations employing 6–31G basis set at Hartee-Fock level of theory. The results predict an extended form of the molecules and torsional angle between the phenyl rings at 90.85(6)⁰ and 90.87(3)⁰, respectively. On the basis of vibrational analysis the frequency assignment was carried out. The calculated frequencies were compared with the experimental IR spectral data in carbon tetrachloride, carbon disulfide solutions and in solid state.     

负载型非晶态Cu/SiO2催化剂的非晶性质

以超细ＳｉＯ２为载体，用ＫＢＨ４还原Ｃｕ＾２＋盐溶液制备了非负载型Ｃｕ和负载型Ｃｕ／ＳｉＯ２催化剂，ＸＲＤ，ＴＥＭ和电子衍射分析结果表明，负载型Ｃｕ／ＳｉＯ２为完全非晶态，而非负载型Ｃｕ中存在着少量晶态Ｃｕ，ＤＳＣ结果表明，非晶态Ｃｕ／ＳｉＯ２的热稳定性明显高于非负载型Ｃｕ，说明超细ＳｉＯ２具有稳定非晶结构的作用，ＸＰＳ结果表明，还原产物中的铜原子呈Ｃｕ状态，ＩＣＰ分析结果表明，样品中的Ｂ含量均低