Parallel detection and quantitative analysis of specific binding of proteins by oblique-incidence reflectivity difference technique in label-free format

In this work, we parallelly detected the specific binding between microarray targets including 12 different kinds of proteins and the probe solution containing five corresponding antibodies and quantitatively analyzed the interactions between CDH13 and solution phase anti-CDH13 at six different probe concentrations by oblique-incidence reflectivity difference (OIRD) method in label-free format. The detection sensitivity reached 10 ng/mL. The experimental results indicate that the OIRD method is a promising and competing technique not only in research work but also in clinic.     

Successive stepwise evolution of host layer‐stacking framework upon the intercalation of mobile vapor guests within side‐chain layers

For the ordered phases of hairy‐rod semiconductive poly(2,5‐bis(3‐tetradecylthiophene‐2‐yl)thieno[3,2‐b]thiophene) (PBTTT) sandwiched in between crystalline platelets of hexamethylbenzene, the successive stepwise evolution of layer‐stacking framework upon guest intercalation has been studied in this research. The direct consequence of the guest intercalation into side‐chain layers is evaluated to cause the lateral shift of thiophene backbones along π–π stacking, resulting in stepwise shift of ultraviolet absorption wavelength. The thermal motions of vapor guests within disordering side‐chain layers subsequently cause progressive expansion of host stacking framework. With the increase in side‐chain length, thicker layers of disordering side chains in liquid crystals (LCs) accommodate additional vapor guests and larger amplitudes of thermal motions of guests, hence promoting the level of reversible d‐spacing change. The mixing between mobile vapor guests and aliphatic side chains is clarified as the mechanism of guest intercalation, which rationalizes successive guest intercalation during heating and the contribution of disordering side‐chain layers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1448–1456     

Structural and electronic properties of type-I and type-VIII Ba8Ga16Sn30 clathrates under compression

The total energy and electronic structures for type-I (β phase) and type-VIII (α phase) Ba₈Ga₁₆Sn₃₀ clathrates under hydrostatic pressure have been investigated using density functional theory (DFT) calculations. It was found that the type-VIII phase is more stable than the type-I one at ambient conditions and that β→α phase transition can not occur under hydrostatic pressure. The band structures show that the type-I and type-VIII Ba₈Ga₁₆Sn₃₀ are indirect semiconductors with band gaps of 0.24 eV and 0.19 eV, respectively. The results suggested that type-I clathrate Ba₈Ga₁₆Sn₃₀ has a larger value of the thermoelectric (TE) power than that of type-VIII clathrate. We found that pressure tuning changes the k-point of conduction band minimum (CBM) in the Brillouin zone for β-phase, but it is not the case for α-phase. Furthermore, the results show that the pressure can change the interaction between guest atoms and the host lattice, and consequently results in the decrease of the band gap of β-phase and the increase of the band gap of α-phase, indicating that the pressure effect can play an important role in the magnitude of the TE power.     

Preparation and solution properties of a novel cationic hydrophobically modified polyacrylamide for enhanced oil recovery

Abstract

A novel cationic water-soluble monomer allyldimethylisooctylammonium bromide (ADIAB) containing a short-chain alkane was synthesized successfully. This monomer was copolymerized with acrylamide and sodium acrylate to produce hydrophobically modified polyacrylamide (HMPAM) using solution polymerization without surfactants. The structures of monomer ADIAB and HMPAM were characterized with infrared spectroscopy and nuclear magnetic resonance spectroscopy. Influence of preparation condition on viscosities of products was studied. The aqueous solution viscosity of the terpolymer was also investigated as functions of concentration, temperature and salinity. The results showed that when the temperature exceeds the 60?°C and NaCl concentration exceeds about 2000?mg/L, the temperature and salt tolerance characters of terpolymer were demonstrated. The enhanced oil recovery tests were initially carried out using homogeneous sandpack models.     

Microwave solid phase synthesis, characterization, and antimicrobial activity of 3,5-diiodo-salicylalidene-glycine-cobalt(II)

One mononuclear complex, C₉H₇I₂NO₄Co(II) (I) with 3,5-diiodo-salicylalidene, glycine and Co(CH₃COO)₂ · 4H₂O were microwave solid synthesized. The complex was characterized by X-ray crystallography, UV, IR, ESI-MS, and elemental analyses. In addition, further investigation revealed that the central cobalt(II) atom in complex is five-coordinated by one nitrogen atom and four oxygen atoms. The complex was assayed for antibacterial (B. subtilis, S. aureus, S. faecalis, P. aeruginosa, E. coli, and E. cloacae) activities by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl trtrazolium bromide) method. Complex I showed favorable antimicrobial activity with MICs of 3.125, 6.25, 6.25, 6.25, 3.125, and 6.25 μg/mL against B. subtilis, S. aureus, S. faecalis, P. aeruginosa, E. coli, and E. cloacae, respectively.     

超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯

采用超声波辅助萃取同位素稀释质谱法测定聚氯乙烯中6种邻苯二甲酸酯的含量。以四氢呋喃为溶剂对样品进行超声波辅助提取后,加入甲醇对聚合物进行沉淀,取上清液,经冷冻离心后进行气相色谱一质谱分析,并采用氘代邻苯二甲酸酯为内标,单点校正法定量。该方法应用于中、日、韩计量比对的样品测定中,两天进行的6次测定结果相对标准偏差为0．7％～3．0％。最终比对结果显示3个国家的数据取得很好的一致性,除DEP相对标准偏差为2．4％以外,其它5种邻苯二甲酸酯相对标准偏差为0．7％～1．2％,测定结果的相对扩展不确定度为1．8％～4．9％,证明该方法准确、可靠。     

高效液相色谱法测定榨菜中柠檬黄的不确定度评定

根据JJF1059～1999《测量不确定度评定与表示》对高效液相色谱法测定榨菜中柠檬黄含量的测定不确定度进行评定。通过对实验过程中样品的取样称量、使用仪器、标准物质、测试过程中的随机因素以及标准工作曲线的拟合等因素进行分析,计算了不确定度分量和合成不确定度。榨菜中柠檬黄含量的测定结果为（0．0375±0．0050）g／kg,k=2。     

Electrogenerated Fe(I) Porphyrins: Efficient Electrocatalysts for Reductive Dechlorination of DDT in N,N′‐Dimethylformamide

Two iron(I) porphyrins were electrogenerated and then utilized as catalysts for the reductive dechlorination of 1,1‐bis(4‐chlorophenyl)‐2,2,2‐trichloroethane (DDT) in N,N′‐dimethylformamide. No reaction is observed between DDT and the Fe(III) or Fe(II) forms of the porphyrin, but the electrogenerated Fe(I) porphyrin efficiently catalyzes the electroreduction of DDT to give (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethane) DDD, (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethylene) DDE and (1,1‐bis(4‐chlorophenyl)‐2‐dichloroethane) DDMU as determined by GC‐MS analysis. The reductive dechlorination was monitored by electrochemistry, controlled potential electrolysis and spectroelectrochemistry and a mechanism for the reaction involving the reduced porphyrins and DDT is proposed. Comparisons are also made between the catalytic properties of metalloporphyrins containing iron, cobalt and manganese central metal ions under the same solution conditions.     

Theoretical studies on the structures, heats of formation, energetic properties and pyrolysis mechanisms of nitrogen-rich difurazano[3,4-b:3′,4′-e]piperazine derivatives and their analogues

The molecular structure, heats of formation, energetic properties, strain energy and thermal stability for a series of substituted difurazano[3,4-b:3′,4′-e]piperazines and their analogues were studied using density functional theory. The results show that it is a useful way to increase the heat of formation values of energetic compounds by incorporating a five- or six-membered aromatic heterocycle to construct a fused ring system. The calculated detonation properties reveal that introducing one heterocycle to construct a fused ring structure greatly enhances their detonation properties. The substitution of the –NF₂, –NO₂ or –NHNO₂ group is very useful for enhancing the detonation performance for the substituted derivatives. According to molecular structure and natural bond orbital analysis, the introduction of the –NO₂, –NF₂ or –NHNO₂ group decreases the stability of the substituted derivative. There is a weak N–NO₂ bond conjugation in the NO₂-substituted derivatives. An analysis of the bond dissociation energies for several relatively weak bonds suggests that all the unsubstituted derivatives have good thermal stability, but the substitution of –NO₂ or –NF₂ remarkably decreases their stability. Considering the detonation performance and thermal stability, eight compounds may be considered as the potential candidates of high-energy density materials with less sensitivity.     

The role of benzoic acid in proline‐catalyzed asymmetric michael addition: A density functional theory study

In asymmetric Michael addition between ketones and nitroolefins catalyzed by L ‐proline, we observed that it was benzoic acid or its derivatives rather than other proton acid that could accelerate the reaction greatly, and different benzoic acid derivatives brought different yields. To explain the experimental phenomena, a density functional theory study was performed to elucidate the mechanism of proline‐catalyzed asymmetric Michael addition with benzoic acid. The results of the theoretical calculation at the level of B3LYP/6‐311+G(2df,p)//B3LYP/6‐31G(d) demonstrated that benzoic acid played two major roles in the formation of nitroalkane: assisting proton transfer and activating the nitro group. In the stage of enamine formation from imine, the energy profiles of benzoic acid derivatives were also calculated to investigate the reasons why different benzoic acid derivatives caused different yields. The results demonstrated that the pK_a value was the major factor for p‐substituted benzoic acid derivatives to improve the yields, whereas for m/o‐substituted benzoic acid derivatives, both pK_a value and electronic and steric effects could significantly increase the yields. The calculated results would be very helpful for understanding the reaction mechanism of Michael addition and provide some insights into the selection of efficient additives for similar experiments. © 2012 Wiley Periodicals, Inc.