Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.     

Structure and electrical properties of Pb(Zr<Subscript>0.25</Subscript>Ti<Subscript>0.75</Subscript>)O<Subscript>3</Subscript> thin films on LaNiO<Subscript>3</Subscript>—Coated thermally oxidized Si substrates

Pb(Zr_0.25Ti_0.75)O₃ (PZT25) thin films were prepared on LaNiO₃-coated thermally oxidized silicon substrates by chemical solution deposition method, where LaNiO₃ electrodes were also prepared by a chemical solution deposition technique. The dielectric constant and dielectric loss of the PZT25 thin films were 570 and 0.057, respectively. The remanent polarization and coercive field were 20.11 μC/cm² and 60.7 kV/cm, respectively. The PZT25 thin films on LaNiO₃-coated thermally oxidized silicon substrates showed improved fatigue characteristics compared with their counterparts on plantium-coated silicon substrates.     

高效液相色谱用标样——多缩乙二醇二甲基丙烯酸酯的研制

本工作对多缩乙二醇二甲基丙烯酸酯标样的制备条件进行了研究。结果表明,应用经典柱色谱及制各级高效液相色谱两步分离,能方便地从合成反应所得粗试样制取纯样品,但是合成反应所用阻聚剂(包括贮存时所用阻聚剂)需要选择易分离的化合物,例如对苯二酚。结果还表明,对于已经过经典色谱柱预分离的二缩三乙二醇二甲基丙烯酸酯试样,硅胶/含0.25%(体积比)甲醇的二氯甲烷二元溶剂,是制备级HPLC比较理想的分离体系,可高效率地制备标样。     

Limit on right handed weak coupling parameters from inelastic neutrino interactions

Right handed weak quark currents coupled to the usual left handed weak lepton current would be seen in inclusive antineutrino scattering on nuclei as a contribution at largey with the quark (not antiquark) structure function. We do not see such a term, and can therefore put an upper limit on the relative strengths of such right handed currents: \(\varrho ^2 = \frac{{\sigma _R }}{{\sigma _L }}< 0.009\) , 90% confidence. This measurement puts limits on the mixing angle of left-right symmetric models. In distinction to similar limits derived from muon decay or β decay, our limits are also valid if the right handed neutrino is heavy.     

The atomic-level structure of bandgap engineered double perovskite alloys Cs2AgIn1−xFexCl6

Although lead-free halide double perovskites are considered as promising alternatives to lead halide perovskites for optoelectronic applications, state-of-the-art double perovskites are limited by their large bandgap. The doping/alloying strategy, key to bandgap engineering in traditional semiconductors, has also been employed to tune the bandgap of halide double perovskites. However, this strategy has yet to generate new double perovskites with suitable bandgaps for practical applications, partially due to the lack of fundamental understanding of how the doping/alloying affects the atomic-level structure. Here, we take the benchmark double perovskite Cs₂AgInCl₆ as an example to reveal the atomic-level structure of double perovskite alloys (DPAs) Cs₂AgIn_1−xFe_xCl₆ (x = 0–1) by employing solid-state nuclear magnetic resonance (ssNMR). The presence of paramagnetic alloying ions (e.g. Fe³⁺ in this case) in double perovskites makes it possible to investigate the nuclear relaxation times, providing a straightforward approach to understand the distribution of paramagnetic alloying ions. Our results indicate that paramagnetic Fe³⁺ replaces diamagnetic In³⁺ in the Cs₂AgInCl₆ lattice with the formation of [FeCl₆]³⁻·[AgCl₆]⁵⁻ domains, which show different sizes and distribution modes in different alloying ratios. This work provides new insights into the atomic-level structure of bandgap engineered DPAs, which is of critical significance in developing efficient optoelectronic/spintronic devices.

Through Fe³⁺-alloying, the bandgap of benchmark double perovskite Cs₂AgInCl₆ can be tuned from 2.8 eV to 1.6 eV. The atomic-level structure of Cs₂AgIn_1−xFe_xCl₆ was revealed by solid-state nuclear magnetic resonance (ssNMR).     

Novel Cp2LnX-mediated coupling-cyclization of propargyl bromide: a new construction of the benzene ring skeleton

In the presence of Cp2LnX-HgCl2, the treatment of RC identical to CCH2Br with Mg leads to the formation of benzene derivatives C6H4R2-1,2 (R = H, Ph) in moderate yield, which provides a new method for the construction of the benzene ring skeleton.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Synthesis of Novel Naphthoquinone Fused 1, 3-Dithioles

2, 3-Dichloro-1, 4-naphthoquinone 3 reacts with 1, 1 -dithiolates 2, prepared from the reaction of CH-acids and carbon disulfide, to give 2-methylidene-4, 10-dioxonaphtho [2, 3-d]-1, 3-dithioles 4. The similar reaction of 3 and dithiocarbamates 6 affords 2-imino-4, 10-dioxonaphtho [2, 3-d] dithioles 7.     

Rational Synthesis of Iron/Nitrogen-Doped Carbon Catalyst through a Spatial Isolation Strategy for Efficient Oxygen Reduction in Acidic and Alkaline Media

It remains challenging to rationally synthesize iron/nitrogen-doped carbon (Fe/N-C) catalysts with rich Fe−N_x atomic active sites for improved oxygen reduction reaction (ORR) electrocatalysis. A highly efficient Fe/N-C catalyst, which has been synthesized through a spatial isolation strategy, is reported. Derived from bioinspired polydopamine (PDA)-based hybrid microsphere precursors, it is a multifunctional carrier that loads atomically dispersed Fe³⁺/Zn²⁺ ions through coordination interactions and N-rich melamine through electrostatic attraction and covalent bonding. The Zn²⁺ ions and melamine in the precursor efficiently isolate Fe³⁺ atoms upon pyrolysis to form rich Fe−N_x atomic active sites, and generate abundant micropores during high-temperature treatment; as a consequence, the resultant Fe-N/C catalyst contains rich catalytically active Fe−N_x sites and a hierarchical porous structure. The catalyst exhibits improved ORR activity that is superior to and close to that of Pt/C in alkaline and acidic solutions, respectively.