Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

二氢茉莉酮酸甲酯的简便合成方法

本文报道二氢茉莉酮酸甲酯的简便合成方法。先由丁二酸和庚酰氯反应得到2-戊基-1,3-环戊二酮(1),再用甲醇醚化1,可得到2-戊基-3-甲氧基-环戊-2-烯酮(2)。2与丙二酸二甲酯反应生成(2-戊基-3-酮-1-环戊烯-)基乙酸甲酮(3)。最后,催化氢化3,便可得到二氢茉莉酮酸甲酯(4)。     

A note on differentiability of the cluster density for independent percolation in high dimensions

The cluster density function of independent percolation in ad-dimensional lattice is considered. For eachn, it is shown that(p) has finitenth leftderivative at critical probabilityp _c ifd is sufficiently large. This result agrees with the Bethe lattice approximation, where thenth one-sided derivative of(p) is bounded atp _c for alln.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Simplified Labeling Approach for Synthesizing 3′-Deoxy-3′-[18F]fluorothymidine ([18F]FLT)

[¹⁸F]FLT (3-deoxy-3-[¹⁸F]fluorothymidine) turned out to be a tracer particularly suitable for PET imaging of tumor proliferation because of lacking degradation in vivo. To facilitate clinical studies with [¹⁸F]FLT, we investigated two new easily accessible precursors, 2,3-anhydrothymidine (AThy) and 5-O-(4,4-dimethoxytriphenylmethyl)-2,3-anhydrothymidine (DMTThy), using a common approach for introducing the label with nucleophilic [¹⁸F]fluoride. Radiochemical yields were determined in dependence on substrate concentration, reaction time and temperature. In the case of AThy (10 mg), best FLT yields were 5.3%±1.2 (130 °C, 30 min). Labeling of DMTThy (10 mg) gave 14.3%±3.3 at 160 °C within 10 minutes. Starting with an aqueous solution of 20 GBq [¹⁸F]fluoride the new method allows to produce 1.3 GBq [¹⁸F]FLT within 90 minutes ready for intravenous injection. The new labeling procedures allow [¹⁸F]FLT synthesis without lengthy preparation of the precursor and with high reproducibility mandatory for clinical application.     

Luminescent heteronuclear Au(I)5Ag(I)8 complexes of [1,2,3-C6(C6H4R-4)3]3- (R = H, CH3, But) by cyclotrimerization of arylacetylides

Unusual AuI-AgI heterometallic complexes [Au5Ag8(mu-dppm)4{1,2,3-C6(C6H4R-4)3}(CCC6H4R-4)7]3+ (R = H 1, CH3 2, But 3) were isolated by reactions of polymeric silver arylacetylides (AgCCC6H4R-4)n with binuclear gold component [Au2(mu-dppm)2(MeCN)2]2+ (dppm = bis(diphenylphosphino)methane), in which cyclotrimerization of arylacetylide -CCC6H4R-4 affords trianion {1,2,3-C6(C6H4R-4)3}3- with an unprecedented mu5-bonding mode. Compounds 1(SbF6)3-3(SbF6)3 exhibit intense photoluminescence derived from an MLCT (Au5Ag8 --> CCC6H4R-4) transition, mixed with a metal cluster-centered excited states.     

Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

三重四极杆电感耦合等离子体质谱(ICP-MS)法测定氧化铕中13种稀土杂质元素

稀土杂质元素直接影响高纯单金属稀土材料的整体性能,是高科技领域许多材料的重要组成部分。通过考察最佳的消解酸量、温度、时间、氧气反应气流量、稀释气流量,建立了基于三重四极杆电感耦合等离子体质谱仪(ICP-MS/MS)直接测定氧化铕中13种稀土杂质元素分析方法。该方法采用0.1%基体直接进样,可以很大程度提高前处理分析效率。利用碰撞模式测定氧化铕稀土中的Y、La、Pr、Nd、Sm、Gd、Tb、Dy、Ho、Er、Yb、Lu元素,氧气质量转移模式测定氧化铕中的Tm,两种模式结合可以有效去除多原子干扰,实现氧化铕的稳定测试分析。通过对氧化铕标准物质（GBW02902）直接测定分析,结果表明,在碰撞和氧气质量转移模式下,各元素线性相关系数（r）均大于 0.9999,方法检出限为0.001~0.023 mg/kg,测试精密度优于1.99%,13种元素的测试值都在认定值的不确定度范围之内。该分析方法操作简单,测试稳定,效率高,为实验室进行氧化铕材料中REE杂质的准确测试分析提供思路和借鉴。     

原子荧光光谱法测定砷过程中还原反应条件的优化

自然界中砷和砷的化合物一般可通过水、大气和食物等途径进入人体,危害人体健康,原子荧光光谱法测定砷含量被广泛应用。为准确测定样品中砷的含量,以原子荧光光谱法(AFS)测定土壤中总砷含量为例,重点研究高价态砷(Ⅴ)还原为低价态砷(Ⅲ)的实验条件,采用正交实验进行条件优化,建立适合的实验方法。通过设计L9(34)正交实验,高价态砷的还原反应与四个因素有关,即与反应温度、反应时间、盐酸加入量和硫脲的用量呈一定的正相关,结果表明,四个因素中硫脲用量的影响最为显著,其次是盐酸加入量、反应时间和反应温度。通过对四个因素的多水平检验,优化后的实验条件为：硫脲用量2.0 mL、盐酸加入量10%、反应时间20 min、温度20～35 ℃(即普通室温)。采用土壤标准物质验证优化后条件的可行性,得出砷的测定值在标准值范围内,RSD在2.2%～4.2%,精密度和准确性均满足质控要求。优化后的实验条件使得操作简便易行,提高了工作效率。     

桑白皮中21种无机元素的测定及其质量评价

为准确了解不同产区桑白皮中多种元素分布及含量情况,用65%硝酸溶液对其样品进行微波消解处理,后采用电感耦合等离子体质谱（ICP-MS/MS）法测定桑白皮样品中21种元素的含量。得到21种元素的线性关系良好,R2 > 0.999,方法学考察试验的RSD均小于3%,加样回收率在91.32%~108.84%之间,RSD均小于4%;Al、Ga、Sr、Ba相比而言含量较大,且不同产区的特异性较明显;主成分分析中17批样品得到4个主成分,累计方差贡献率达 87.380%,确定V、Co、Al、Li、As、Se、Pb、U、Zn、Cr、Cd、Ga、Ba、Cs、Ni等15种元素为桑白皮药材的特征元素;相关性分析可知,元素间的相关性较强, P≤0.05的元素与主成分分析的特征元素基本一致。参照2020年版《中国药典》中对中药材中有害元素的限量规定,发现桑白皮样品中Pb、Cd、As、Cu有害元素的含量均未超过限量要求。ICP-MS/MS能准确快速测定桑白皮中21种元素含量情况,这对评价不同产区桑白皮质量,完善桑白皮质量标准具有一定参考价值。