线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

双路激光混沌复用系统的混沌同步及安全性能研究

针对一种新型的双路激光混沌复用系统, 建立相应的速率方程模型, 详细分析了两个主激光器的单个参数失配、多个参数同时失配、反馈强度差异以及频率失谐对混沌同步性能的影响, 并对此复用系统的安全性能和频谱性能进行了研究. 研究结果表明: 采用参数失配方案, 通过合理选择两个主激光器的参数, 可以保证两个主激光器之间的同步性能较差而两对主从激光器间实现高品质的混沌同步, 因此满足双路激光混沌复用的条件; 两个主激光器之间的参数失配对它们之间的同步性能影响较大, 然而对配对主从激光器间同步性能的影响并不明显, 进一步说明参数失配方案的有效性和可行性. 另外, 通过自相关函数和频谱分别分析混沌复用信号的时域和频域特征, 发现双路激光混沌复用系统可提供更高的安全性.     

质子与金属布线层核反应对微纳级静态随机存储器单粒子效应的影响分析

金属布线层对微纳级静态随机存储器(static random access memory, SRAM) 质子单粒子效应敏感性的影响值得关注. 利用Geant4针对不同能量(30 MeV, 100 MeV, 200 MeV和500 MeV)的质子与微纳级SRAM器件的核反应过程开展计算, 研究了核反应次级粒子的种类、线性能量传输值(linear energy transfer, LET)及射程情况, 尤其对高LET 值的核反应次级粒子及其射程开展了详细分析. 研究表明, 金属布线层的存在和质子能量的增大为原子序数大于或等于30的重核次级粒子的产生创造了条件, 器件体硅区中原子序数大于60的重核离子来源于质子与钨材料的核反应, 核反应过程中的特殊作用机理会生成原子序数在30至50之间的次级粒子, 且质子能量的增大有助于这种作用机理的发生, 原子序数在30至50之间的次级粒子在器件体硅区的LET值最大约为37 MeV·cm²/mg, 相应射程可达到几微米, 对于阱深在微米量级的微纳级SRAM器件而言, 有引发单粒子闩锁的可能. 研究结果为空间辐射环境中宇航器件的质子单粒子效应研究提供理论支撑.     

Phase‐preserved macroscopic visible‐light carpet cloaking beyond two dimensions

Transformation optics, a recent geometrical design strategy of light manipulation with both ray trajectories and optical phase controlled simultaneously, promises an invisibility cloaking device that can render a macroscopic object invisible even to a scientific instrument measuring optical phase. Recent “carpet” cloaks have extended their cloaking capability to broadband frequency ranges and macroscopic scales, but they only demonstrated the recovery of ray trajectories after passing through the cloaks, while whether the optical phase would reveal their existence still remains unverified. In this paper, a phase‐preserved macroscopic visible‐light carpet cloak is demonstrated in a geometrical construction beyond two dimensions. As an extension of previous two‐dimensional (2D) macroscopic carpet cloaks, this almost‐three‐dimensional carpet cloak exhibits three‐dimensional (3D) invisibility for illumination near its center (i.e. with a limited field of view), and its ideal wide‐angle invisibility performance is preserved in multiple 2D planes intersecting in the 3D space. Optical path length is measured with a broadband pulsed‐laser interferometer, which provides unique experimental evidence on the geometrical nature of transformation optics.

     

Broadband spin‐controlled focusing via logarithmic‐spiral nanoslits of varying width

This work presents analytical, numerical and experimental demonstrations of light diffracted through a logarithmic spiral (LS) nanoslit, which forms a type of switchable and focus‐tunable structure. Owing to a strong dependence on the incident photon spin, the proposed LS‐nanoslit converges incoming light of opposite handedness (to that of the LS‐nanoslit) into a confined subwavelength spot, while it shapes light with similar chirality into a donut‐like intensity profile. Benefitting from the varying width of the LS‐nanoslit, different incident wavelengths interfere constructively at different positions, i.e., the focal length shifts from 7.5 μm (at λ = 632.8 nm) to 10 μm (at λ = 488 nm), which opens up new opportunities for tuning and spatially separating broadband light at the micrometer scale.

     

Structural transition behavior of ZnS nanotetrapods under high pressure

ZnS nanotetrapods synthesized via a solvothermal route have a octahedral core with a zincblende (ZB) structure and four hexprism-shaped arms consisting of alternately stacking ZB and wurtzite (WZ) phases, where the WZ phase has a higher volume percentage. In situ angular-dispersive X-ray diffraction (ADXRD) measurements were carried out to study the structural behavior of ZnS nanotetrapods under high pressure up to 41.3?GPa. The initial WZ structure exhibits a very high mechanical stability to ～11.3?GPa. Both the WZ and ZB structures transform to the rocksalt (RS) structure at ～15.4?GPa. The bulk moduli of the WZ (148.2?±?8.9?GPa) and RS (165.6?±?9.9?GPa) phases are both larger than the previously reported values. These phenomena are discussed based on the alternating epitaxial growth of the WZ and ZB phases in the arms of nanotetrapods. Our study suggests that the internal structure of nanomaterials could also greatly affect their stability and transition behavior.     

氩气驱动液态锂回路的总体设计及初步运行结果

为了研究等离子体与自由液态锂表面相互作用的物理过程,建立了用氩气驱动的液态锂回路装置。介绍了建立的液态锂回路装置的组成部分、技术参数及运行原理。此回路主要由主回路、等离子体与液态锂相互作用试验段和单阴极高密度等离子体发生装置三部分组成。目前,此回路已取得一些初步的模拟结果和实验结果。     

Characterization and performance of cobalt-free perovskite-type La0.6Ba0.4Fe0.8Ni0.2O3 − δ cathode material for intermediate-temperature solid oxide fuel cells

Ionics - A novel cobalt-free perovskite La0.6Ba0.4Fe0.8Ni0.2O3 − δ (LBFN) powder was synthesized using a combustion method. The phase composition, electrical conductivity, thermal...     

取向比对椭球气溶胶粒子散射特性的影响

利用T矩阵和离散坐标法研究了取向比对椭球粒子散射特性的影响, 计算了小尺度范围内椭球粒子的散射特征参量, 包括消光效率因子、不对称因子、单次散射反照率、散射相矩阵及双向反射函数(BRDF). 结果表明, 椭球粒子的散射特性与取向比密切相关, 粒子取向比会影响散射参量的振荡频率和振幅, 与球形粒子散射参量的相对差异也呈周期振荡趋势. 研究还发现, 某些特殊粒子尺寸的散射参量与粒子取向比基本无关. 在多次散射条件下, 分析不同取向比粒子群的BRDF随反射角和光学厚度的变化特性. 结果显示: 不同取向比粒子群的BRDF随反射角的变化趋势基本一致, 球形粒子群比非球形粒子群的BRDF曲线波动振幅更大; 球形-非球形粒子的BRDF相对差异随光学厚度和取向比的增大而减小, 随入射角的增大而增大.     

Great enhancement in remnant polarization of SrBi4Ti4O15 thin films by A-site doping of Fe3+ ions

SrBi4-xFexTi4O15 (SBFT-x) thin films (x = 0.00, 0.05, 0.08, 0.15) have been synthesized on Pt/Ti/SiO2/Si (100) substrates by sol-gel method. This paper finds that Fe-doping does not change the crystal structure of SrBi4Ti4O15 (SBTi). The coercive filed (Ec) and remnant polarisation (Pr) increase at first, then decrease with the increase of Fe doping content. At a maximum applied field of 229 kV/cm, the 2Pr reaches a maximum value of 91.1 μC/cm2 at x = 0.05 and the corresponding Ec is 72 kV/cm. The 2Pr increases by about 260% and the Ec decreases by about 6%, respectively. Obviously, the ferroelectric property of SrBi4Ti4O15 is greatly enhanced by Fe doping. The fatigue-endurance characteristic of the SBFT-0.05 is not improved. After 1.1×109 read/write cycles at a frequency of 50 kHz, the nonvolatile polarisations (Pnv = P*-P∧) decreased about 48% of its initial value.