呋喃甲醛缩二乙撑三胺希夫碱铜配合物的合成及结构(英)

A novel copper(Ⅱ) complex CuL(NO₃)₂(where L=N,N′-bis(furaldehyde)-diethylenetriamine) was synthesized and characterized by X-ray crystallography analysis. The crystal belongs to monoclinic, space group C2/c with cell parameters a=1.924 0(6) nm, b=0.792 8(3) nm, c=2.504 1(8) nm, β=111.163(5)°, and Z=8. The coordination geometry around Cu(Ⅱ) is a distorted trigonal-bipyramid，and one-dimensional chain is formed through intermolecular hydrogen bonds. CCDC: 255629.     

Electronic stopping powers of Ni, Gd and Pd metals for 19F ions at low energy

Summary Electronic stopping power of ¹⁹F in Ni, Pd and Gd was measured and compared to Mstar and SRIM calculation as well as experimental results published in literature. It turns out that the present electronic stopping power agrees reasonably well with them.     

1''-苯基-3''-甲基-5''-氧代吡唑-4''-基乙醛酸希土配合物的合成及性质研究

本文采用电导、pH滴定法研究了乙醇-水溶液中希土与1′-苯基-3′-甲基-5′-氧代吡唑-4′-基乙醛酸(简称H₂A)的配位反应.合成了15种新的希土固态配合物.通过元素分析、化学分析、水份分析确定了配合物的化学组成为RE(HA)₃·nH₂O(RE=Ce、Pr、Sm、Tm、Lu、n=1;RE=La、Nd、Eu、Gd、Tb、Dy、Ho、Er、Yb、Y,n=1-2).并对配合物的红外光谱、核磁共振谱、热稳定性、紫外光谱、溶解性及摩尔电导进行了测定.     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

阿奇霉素片及胶囊剂溶出度考察

采用硫酸显色法对两家药厂生产的阿奇霉素片及胶囊剂进行了溶出度考察。结果表明，阿奇霉素在10－100μg/mL范围内线性关系良好，平均 回收率为99．83％（n=6)。阿奇霉素片及胶囊剂在45min时的溶出量均不低于标示量的80％。而两厂产品体外溶出度结果均达到要求。     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors

A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application.     

铈杂多配离子-水滑石超分子层柱材料ZnAl-Ce(PMoV)2的插层组装、表征及催化性能

以十四酸根阴离子柱撑Zn-Al水滑石Zn0.77Al0.22(OH)2.0.22C13H27COO.0.81 H2O(记为ZnAl-14A)为预撑前体,在水溶液中用离子交换法将以2∶17缺位杂多酸根离子(P2Mo16VO61)11-记为(P Mo V)为配体的稀土杂多配阴离子Ce(P2Mo16VO61)219-(记为Ce(PMoV)2)插层组装到水滑石层板间,合成了一种具有大的层间距(3.37 nm)的超分子插层材料Zn0.77Al0.23(OH)2.0.0105[Ce(P1.9Mo15.7V1.1O61)2].0.011C13H27COO.0.83H2O(记为ZnAl-Ce(PMoV)2)。用ICP,IR,XRD和DTA对产物的组成和结构进行了表征。结果表明,该产物中Ce(PMoV)2配阴离子沿其长轴垂直于层板的方向分布于水滑石层间;产物具有规整的层状结构和热稳定性;产物对乙酸与正丁醇的酯化反应,二甘醇的脱水-环化反应和H2O2氧化环己烷的反应有良好的催化性能,且易于回收重复使用。