Über die Erzeugung der 2. harmonischen Frequenz der Strahlung eines Nd-Lasers in KDP

Ohne Zusammenfassung     

Coherent combination of high-power, zigzag slab lasers

We demonstrate a scalable architecture for a high-power, high-brightness, solid-state laser based on coherent combinations of master oscillator power amplifier chains. A common master oscillator injects a sequence of multikilowatt Nd:YAG zigzag slab amplifiers. Adaptive optics correct the wavefront of each amplified beamlet. The beamlets are tiled side by side and actively phase locked to form a single output beam. The laser produces 19 kW with beam quality <2x diffraction limited. To the best of our knowledge, this is the brightest cw solid-state laser demonstrated to date.     

Some historical and technical aspects of beam quality

A survey is given on the various algorithms to describe the propagation of radiation fields in the paraxial approximation, starting with the Kirchhoff-Fresnel-Collins-integral and ending with the intensity moments and the generalizedABCD-law. The importance of characterizing beam quality for technical applications by suitable parameters is pointed out. The two competing definitions of beam parameters, intensity moments and power content values are discussed.     

Day-side auroral signatures based on simultaneous, coordinatedobservations at Svalbard and Greenland

The height distribution of the dayside cusp aurora and the relation between optical emissions and net downward electron energy flux are discussed. These two important characteristics of day-side cusp aurora are still unknown. It is instructive to compare particle flux and optical luminosity because these two quantities should be proportional if the cusp aurora is caused by electron impact, as has been found for nighttime aurora in the oval. Furthermore, there should then be a direct relation between auroral altitudes and particle energy. Based on coordinated auroral observations at Svalbard and Greenland, together with simultaneous, overhead F-9 satellite measurements, these quantities have been evaluated     

A model for the interaction of near-infrared laser pulses with metal powders in selective laser sintering

A thermal model of the interaction of pulsed near-infrared laser radiation from a Nd:YAG laser was made, taking the measured powder properties such as reflectance, optical penetration depth and thermal conductivity into account. It allows an estimation of the evolution of two different temperatures: the average temperature of the powder (taken over the grains in a volume given by the laser beam diameter and the optical penetration depth) and the temperature distinction within a single grain. It showed that in pulsed mode consolidation can be achieved at much lower average power as the surface of the powder particles are molten but their cores remain at nearly room temperature. This leads to a much lower average temperature and therefore a dramatic decrease in residual thermal stresses in the finished piece. The results of the model were experimentally tested and confirmed. Received: 26 July 2001 / Accepted: 23 November 2001 / Published online: 23 January 2002     

Threshold conditions for 800 nm pumping of 2 μm Tm : Ho lasers

Pumping requirements of pulsed and continuous wave (CW) 2 m Tm : Ho lasers are investigated experimentally and theoretically for excitation at 800 nm. The influence of the pulse duration on threshold is measured using a chopped Ti : Al₂O₃ laser. Based on the experimental and simulated results the spatial and temporal pump requirements in future quasi-CW high-power diode-pumped 2 m Tm : Ho lasers are determined. The experiments and the model allow the evaluation of different loss mechanisms and indicate significant 540 nm emitting loss mechanisms.