Making the liquid-phase catalytic hydrodechlorination of pce over Pd/C safer

Summary The hydrodechlorination of tetrachloroethylene in methanol (MeOH) over palladium catalysts on activated carbon (Pd/C) at 20°C and atmospheric pressure was rendered safer by using ethanol (EtOH), isopropanol (IPA) or water-alcohol mixtures as solvents. Adding water to MeOH was better than using EtOH or IPA since it resulted in a faster reaction and better stability of Pd/C, which could also be completely reactivated.     

Direct conversion of allylic alcohols into N-acyl-α-amino acids by catalytic amidocarbonylation by means of homogeneous binary systems

N-Acyl-α-amino acids are synthesized by the amidocarbonylation of allylic alcohols catalyzed by homogeneous binary systems which consist of cobalt carbonyl and rhodium (or iron or palladium) complexes.     

Synthesis and structure of 16 pi octaalkyltetraphenylporphyrins

The oxidized octaethyltetraphenylporphyrin (1, OETPP) and the corresponding newly prepared octaisobutyltetraphenylporphyrin (3, OisoBuTPP) could be isolated from the reaction of OETPPLi2 (or OisoBuTPPLi2) with SOCl2. The X-ray analysis and the characteristic UV-vis spectra of 1 and 3 revealed that these are the first examples of 16 pi nonaromatic porphyrins.     

1,3,8,10-Tetrahydro-2,9-diazadibenzo[cd,lm]perylenes: synthesis of reduced perylene bisimide analogues

A unique family of 1,3,8,10-tetrahydro-2,9-diazadibenzo[cd,lm]perylenes (THDAP) was prepared through a new synthetic strategy. Completion of the synthesis was achieved in several steps from commercially available perylene-3,4,9,10-tetracarboxylic dianhydride via reactions between 3,4,9,10-tetra(chloromethyl)perylene and primary amines. The successful use of a variety of primary amines in the reactions indicated that the synthetic approach provides a rich opportunity to produce new functionalized perylene derivatives.     

A Novel Production of γ-Butyrolactone Catalyzed by Homogeneous Ruthenium Complexes

γ-Butyrolactone (hereafter abbreviated GBL) is produced by the two-stage hydrogenation of maleic anhydride(MAH) in the liquid phase: the hydrogenation of MAH to succinic anhydride(SAH) in the first stage and the subsequent hydrogenation of SAH to GBL in the second stage. A novel ruthenium catalyst system consisting of Ru salts, trialkylphosphine and p-toluene sulfonic acid (p-TsOH) was found very effective for the hydrogenation of SAH affording GBL, which exhibited excellent catalyst performance, exceeding 97% selectivity for GBL and high activity.     

Excited states of phosphorescent platinum(II) complexes containing N wedge C wedge N-coordinating tridentate ligands: spectroscopic investigations and time-dependent density functional theory calculations

The absorption and emission spectra of the Pt(II) complexes containing N wedge C wedge N-coordinating tridentate ligands, platinum(II) 1,3-di(2-pyridyl)benzene chloride [Pt(dpb)Cl] and platinum(II) 3,5-di(2-pyridyl)toluene chloride [Pt(dpt)Cl], together with their corresponding free ligands, 1,3-di(2-pyridyl)benzene (dpbH) and 3,5-di(2-pyridyl)toluene (dptH), have been analyzed by density functional theory (DFT) for the ground state and time-dependent DFT (TDDFT) for the excited states. T(1)(A(1)) and S(1)(B(2)) of the complexes (in C(2)(v) symmetry) were assigned on the basis of the calculated excitation energies as well as comparison of the experimental spectroscopic properties and the calculated states' characteristics. The calculated excitation energies for T(1) and S(1) of the complexes as well as those for T(1) of the free ligands were in good agreement with their observed values within 600 cm(-1). The d-pi* characters of the excited states were evaluated from the change in electron densities between the ground and excited states by Mulliken population analysis; values of 25% for T(1) and 32% for S(1) were obtained for both complexes. The calculated values of d-pi* character were found to be consistent with the reported emission lifetimes as well as the observed emission energy shifts from the corresponding free ligands. Most spectroscopic properties of the complexes and the free ligands, which include solvatochromic shift, Stokes shifts, methyl substitution shifts, and emission spectra profiles, were well explained from the calculation results.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

Reaction of sulphoximides with diazomalonate in the presence of Cu-salt : A new synthesis and stereochemistry of optically active oxosulphonium ylides

Sulphoximides (Ia–Ie) were found to react with dimethyl diazomalonate (DDM) in the presence of a catalytic amount of Cu-salts affording the corresponding oxosulphonium ylides in moderate yields. The reaction did not proceed at all under irradiation of UV light. (?)-Methylphenyloxosulphonium bis(methoxycarbonyl)-methylide ((?)-IIb) was obtained from (+)-(S)-methylphenylsulphoximide ((+)-(S)-Ib) together with (?)-(S)-methyl phenyl sulphoxide ((?)-(S)-IIIb) by this reaction. Hydrolysis of (?)-IIb gave (+)-methylphenyloxosulphonium methoxycarbonylmethylide ((+)-IIf) which was converted to (?)-(S)-IIIb upon treatment with dibenzoylethylene. Stereochemical cycle starting from (+)-(S)-Ib to (?)-(S)-IIIb was established and the absolute configurations of both ylides, (?)-IIb and (+)-IIf were assigned as (R)-configuration. The stereochemical courses, namely from (+)-(S)-Ib or (?)-(S)-IIIb to (?)-(R)-IIb or (+)-(R)-IIf to (?)-(S)-IIIb were determined as retention processes. The optical purities of the oxosulphonium ylides obtained from both reactions, (+)-(S)-Ib→(?)-(R)-IIb and (?)-(S)-IIIb→(?)-(R)-IIb, were almost equal. These results indicate that the mechanism of the reaction of sulphoximides with carbenes (or carbenoids) involves the initial formation of the sulphoxides which react subsequently with carbenes to afford the final products.     

Crystal structure of poly(p-benzamide)

Redetermination of the crystal structure of poly(p-benzamide) was made by using newly collected intensity data. The molecular conformation is TCTC, where the internal rotation angles about the N? C bond of the amide group and about the virtual bond of N-phenyl-C are T (trans) and C (cis) conformations, respectively. Two molecular chains pass through a rectangular unit cell with dimension, a = 7.75 Å, b = 5.30 Å, c (fiber axis) = 12.87 Å, and the space group, P2₁2₁2₁-D. The reflection observed at the spacing of 010 may be attributed to the reflection due to another crystal polymorph or the diffuse scattering due to disorder. © 1993 John Wiley & Sons, Inc.     

High resolution capillary gas chromatographic hydrocarbon-type analysis of naphtha and gasoline

A slightly modified, commercially available high resolution capillary gas chromatograph and a PC-based data processing system running proprietary software (“PONA”) have been employed in the development of a system for petroleum type analysis which would be equivalent or superior to the FIA (fluorescent indicator adsorption) method in terms of ease of use and the speed, variety, and accuracy of the analytical data produced. The system is capable of performing identification and quantitation of most of the individual components in a complex gasoline sample consisting of more than 230 components and can report weight percentage and/or volume percentage for each component as well as types by carbon number (e.g., isoparaffins, normal paraffins, olefins, naphthenes, aromatic compounds) within a ca. 70 minute analysis cycle. Precolumn sulfonation to trap olefins and aromatic compounds has been used as an complementary technique to the basic mass spectrometric identification of components of interest. The estimation of correction factors for weight percentage (or volume percentage) calculation are also discussed. Comparisons are made between this system and others, and the results indicate that the proposed method supersedes the conventional method employing FIA.