Photohydration and photosolvolysis of biphenyl alkenes and alcohols via biphenyl quinone methide-type intermediates and diarylmethyl carbocations

Evidence is presented for the photochemical generation of novel biphenyl quinone methide (BQM)-type intermediates on photolysis of hydroxybiphenyl alkenes 7 and 8 and hydroxybiphenyl alcohols 9 and 10. Mechanistic investigations utilizing product, fluorescence, and nanosecond laser flash photolysis (LFP) studies indicate two distinct pathways for the formation of these BQMs depending upon the functional groups of the progenitor. Formal excited-state intramolecular proton transfer (ESIPT) between the phenol and the alkene led to BQMs upon irradiation of the hydroxybiphenyl alkenes 7 and 8, while excited-state proton transfer (ESPT) to solvent followed by dehydroxylation was responsible for BQM formation from the hydroxybiphenyl alcohols 9 and 10. Photolysis of 7 and 8 in aqueous CH(3)CN gave photohydration products via attack of water on the respective BQMs, while photolysis of the analogous methyl ethers (of the phenolic moiety) gave only carbocation intermediates. Hydroxybiphenyl alcohols 9 and 10 yielded the corresponding photomethanolysis products in aqueous methanol, through attack of CH(3)OH on the respective BQMs. Although no evidence was found for BQM formation in LFP studies of 8 and 10, due to its suspected short lifetime, the respective diaryl carbocation (lambda(max) 420 nm, tau = 8.5 micros) has been observed upon irradiation of 8 in 2,2,2-trifluoroethanol. A BQM (lambda(max) 580 nm) was observed for 9 but not for 10, the latter having more complex chemistry on laser excitation, resulting in a transient that appears to mask any BQM absorption. Significant quenching of fluorescence from the hydroxybiphenyl alkenes at low water content implies that H(2)O is directly involved in reaction from the singlet excited state. The decrease in fluorescence intensity of 8 was found to depend on [H(2)O](3); however, the distance required for ESIPT in these systems is too large to be bridged by a water trimer. The nonlinear quenching has been attributed to deprotonation of the phenol by two water molecules, with concerted protonation at the alkene by another molecule of water. Fluorescence quenching of the hydroxybiphenyl alcohols required much higher water content, implying a different mechanism of reaction, consistent with the proposal of ESPT (to solvent water) followed by dehydroxylation.     

Recognition of single nucleotide polymorphisms using scanning potential hairpin denaturation

Conventional single nucleotide polymorphism (SNP) assays, which based their detection on the stringency or temperature of the washing buffers, have encountered difficulties to distinguish a single base pair mismatch from a perfect match. In this study, scanning potential hairpin denaturation (SPHD) has been developed to detect SNP in a sensitive and reliable manner. Combined with hairpin oligonucleotide probes, scanning surface electric potential was used to induce a dissociation of double-stranded DNA around a unique "melting potential" (Vm), and it generated a high-contrast SNP recognition signal. A 21 base pair p53 gene segment was used to test this novel method. A single nucleotide mismatch to the hairpin probes caused an average of 400-800 mV difference in melting potential against the perfect match, while the error of this assay was lower than 20 mV. Experiments demonstrated that the hairpin stem was critical to the method. The concept of scanning potential hairpin denaturation could also be used extensively in different areas of nucleotide hybridization based assays.     

Separation of lidocaine and its metabolites by capillary electrophoresis using volatile aqueous and nonaqueous electrolyte systems

The separation of the basic drug lidocaine and six of its metabolites has been investigated both by using volatile aqueous electrolyte system, at low pH and by employing non-aqueous electrolyte systems. In aqueous systems, the best separation of the compounds under the investigated conditions was achieved by using the electrolyte 60 mM trifluoroacetic acid (TFA)/triethylamine (TEA) at pH 2.5 containing 15% methanol. With this electrolyte, all seven compounds were well separated with high efficiency and migration time repeatability. The separations with bare fused-silica capillaries and polyacrylamide-coated capillaries were compared with higher separation efficiency with the latter. On the other hand, near baseline separation of all the seven compounds was also obtained by employing the non-aqueous electrolyte, 40 mM ammonium acetate in methanol and TFA (99:1, v/v), with comparable migration time repeatability but lower separation efficiency relative to the aqueous system.     

A Model for Calculating Electrostatic Interactions between Colloidal Particles of Arbitrary Surface Topology

A numerical model for calculating the electrostatic interaction between two particles of arbitrary shape and topology is described. A key feature of the model is a generalized discretization program, capable of simulating any desired analytical shape as a set of flat, triangular elements. The relative sizes of the elements are adjusted using a density function to better match the desired shape and the spatial variation of the electrical surface properties on each particle. The distribution of either surface potential or surface charge density is then calculated using a boundary element approach to solve the linearized Poisson-Boltzmann equation. Example interaction energy profiles are calculated for three different types of roughness-bumps, pits, and surface waves. It is found that the interaction energy between rough particles remains different from that between two equivalent smooth spheres at all separations, even for gap widths much larger than either the solution Debye length or the characteristic roughness size. This behavior at large gap widths arises from the nature of the decay of the electric potential away from each particle. In addition, the magnitude of the roughness effect is found to depend greatly on the size and shape of the nonuniformity as well as the electrostatic boundary conditions. For example, for a sphere containing asperities of height equal to 0.2 times the particle radius, the interaction energy can be as much as 50% greater than that between two equivalent spheres under the condition of constant surface potential. At constant surface charge density, the ratio of the interaction energies between rough and smooth spheres was found to either diverge or become zero as contact between the two particles is approached, depending on the nature of the roughness. Changes of this magnitude could clearly have a substantial impact on the stability behavior of a dispersion of such particles. Copyright 2001 Academic Press.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Nucleosides. Part LX. Synthesis and Characterization of Monomeric Cordycepin-Vitamin and Cordycepin-Lipid Conjugates Model Substances for Biodegradable Ester and Carbonate Linkages in Conjugates and Potential Inhibitors of HIV-1 Replication

Monomeric 3′-deoxyadenosine (cordycepin) was modified at the 2′-O- ( 13–18 ) and 5′-O-position ( 25–29 ) by the vitamins E, D₂, and A and by the two lipids 1,2-di-O-palmitoylglycerol and 1,2-di-O-hexadecylglycerol via succinate or carbonate linkages. The base-labile conjugates afforded protection groups like the 2-(4-nitro-phenyl)ethoxycarbonyl (npeoc) and monomethoxytrityl group (MeOTr) that are cleavable without harming the ester and carbonate bonds, respectively. Monomeric conjugates of cordycepin and vitamin E, vitamin D₂, 1,2-di-O-palmitoylglycerol, and 1,2-di-O-hexadecylglycerol (see 13, 14, 17, 18, 25, 26, 28 , and 29 ) inhibited HIV-1-induced syncytia formation 1.7 to 6.2 fold compared to 1.5-fold for cordycepin (see Table); IC₅₀ values for 25 and 28 were 257 and 267 m?M , respectively. In addition, the monomeric cordycepin-vitamin and -lipid conjugates inhibited HIV-1 RT activity 28–49% which compares with a 13% inhibition of HIV-1 RT observed for cordycepin. The minimal inhibition of HIV-1-induced syncytia formation and HIV-1 RT activity did not proceed by the activation of RNase L. The monomeric conjugates tested ( 13, 14 ) increased PKR expression.     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.