Unexpected valence bond isomerization of [1,2,4]triazolo[3,4-c][1,2,4]benzotriazines under flash vacuum pyrolytic (fvp) conditions

Flash vacuum pyrolysis (fvp) of some substituted [1,2,4]triazolo[3,4-c][1,2,4]benzotriazine derivatives (1a-d) has been studied between 450 and 600 °C. The only transformation observed up to 525 °C was the unexpected valence bond isomerization of the angularly fused starting compounds to the isomeric linearly fused [1,2,4]triazolo[4,3-b][1,2,4]benzotriazine derivatives (9a-d), whereas at higher temperatures fragmentation products such as aromatic nitriles were also formed. Kinetic measurements revealed negative entropies of activation in the isomerization process, which suggest a concerted ring closure reaction to an intermediate antiaromatic diazirine. Reversibiblity of the title isomerization reaction was also proved by FVP experiments.     

Gold nanoparticle-enhanced surface plasmon resonance measurement with a highly sensitive quantification for human tissue inhibitor of metalloproteinases-2

Two different methods for the quantification of human tissue inhibitor of metalloproteinases-2 (TIMP-2) were developed using surface plasmon resonance (SPR) and gold nanoparticles for signal enhancement. The first method, a competitive assay, used TIMP-2 immobilized to the sensor surface and the inactive form of matrix metalloproteinase-2 (proMMP-2) (EC 3.4.24.24) adsorbed to gold nanoparticles. The sensor signals resulting from the interaction of MMP-2-gold nanoparticles with immobilized TIMP-2 were inversely proportional to the amounts of TIMP-2 of the sample. The measuring range for TIMP-2 was about 15–180 pM. The second method, a one-step sandwich assay, used proMMP-2 immobilized to the sensor surface and an anti-TIMP-2 monoclonal antibody coupled to gold nanoparticles. The lower detection limit of this assay format was 0.5 pM of TIMP-2. The binding signals were highly reproducible up to 100 pM of the inhibitor. The improvements obtained in TIMP-2 quantification over already existing tests could contribute to a better understanding and diagnosis of diseases like cancer.     

HPLC isolation and NMR structure elucidation of the most prominent octabromo isomer in technical octabromo diphenyl ether

The major octabromo isomer of technical octabromo diphenyl ether mixture (technical octaBDE) DE-79 was isolated by RP-HPLC. Three serially coupled columns (each 250 mm long) enabled a good separation of the target compound from other congeners using 100% ACN as eluent. Approximately 100 microg of the target compound was isolated with a purity of >90% and investigated by MS for confirmation of the degree of bromination. 1H-NMR and 2-D 1H-13C correlation NMR spectra unequivocally clarified that the octaBDE in question is 2,2',3,3',4,4',6,6'-octabromodiphenyl ether (BDE 197). Based on annual production rates of technical BDE products (1999/2001), approximately 380 tons of BDE 197 were annually produced which, on the long term, may enter the environment. Compared with other individual BDE congeners, BDE 197 has the seventh highest application rate. Reductive debromination of BDE 197 can lead to four hepta-, 15 hexa-, 23 penta-, and 28 tetra-BDE isomers, respectively. This variety includes all known major BDEs of environmental concern (BDE 47, 85, 99, 100, 153, 154, and 183). The identification of BDE 197 in technical octaBDE DE-79 strongly suggests that research on the environmental fate of BDEs should include this key-BDE congener.     

A photometric detector driven by beta radiation

It was recently found that typical Chromatographic carrier gases such as argon or nitrogen could be used in a modified flame photometric detector for general or selective determination of eluted molecules. The detector was powered not by a flame but by a radioactively stimulated, mild discharge. The luminescence arose from the second positive system of nitrogen (in argon), and various emissions from aroyl-containing molecules (in nitrogen).This study describes experiments that take away not only the flame but also the discharge: The energy that produces the luminescence is derived solely from the beta decay of⁶³Ni. Because of this low power input, the sensitivity of the present beta-driven photometric detector (-PD) is limited to about 25 ppm of nitrogen (in argon), and to about 5 pg/s for benzaldehyde and other well-responding aroyl compounds (in nitrogen). In accordance with mechanisms postulated earlier, other types of molecules do not produce significant responses in the absence of an electrical field.Material taken from doctoral thesis     

Acidité dans le nitrométhane: III. Détermination électrochimique de la basicité du nitrométhane — Corrélation Dn/Eo(Hs+/H2/

The use of the complex acid HAlCl₄ (HCl+AlCl₃) permits the detemrination of the standard potential of the hydrogen electrode in nitromethane. The result (E₀(H_s⁺/H₂)=0.5 V vs. Fc/Fc⁺, Fc=ferrocene) shows that nitromethane is very weakly basic. This measurement is confirmed by showing that the standard potential of the hydrogen electrode in various solvents is linked to Gutmann's donor numbers of these solvents. The E₀(H_s⁺/H₂) value obtained in nitromethane belongs to the correlation line.     

On the magnetic properties and the phase composition of the Cr2O3?MnOx-system (2 ≥ x ≥ 1.5)

The mixed oxide system Cr₂O₃? MnO_x (2 ≥ x ≥ 1.5) was investigated by X-ray diffraction, by measurements of magnetic susceptibility, and by chemical determination of excess oxygen (BUNSEN'S method). The Presence of the antiferromagnetic oxides Cr₂O₃, β-MnO₂, α-Mn₂O₃ and a ferromagnetic phase Cr_1?yMn_yO₂ was stated. The formation of the latter with fourvalent chromium is explained by a lattice induction effect of the MnO₂ (rutile type).     

Preliminary estimate of the cost of ethanol production for ssf technology

The Solar Energy Research Institute (SERI) recently completed a detailed engineering and economic analysis of the simultaneous saccharification and fermentation (SSF) based wood-to-ethanol process. The reference-case design was based on a plant capacity of 1920 dry t/d and a wood cost of $42/dry t. For this case, the preliminary estimate of the production cost of the ethanol product is about $1.22/gal. The combined effects of optimizing SSF enzyme loading, increasing plant capacity to 10,000 dry t/d, and reducing wood cost to $34/dry t are to reduce the preliminary estimate of the production cost to about $0.95/gal. Other technological improvements may further reduce the production cost. Certain technical assumptions, inherent in the analysis, are being investigated further.

     

Syntheses of bile pigments. Part 15. First unequivocal assignment of the absolute configuration of an urobilinoid bile pigment by X-ray diffraction analysis of its synthetic precursor

(?)-(4S,16S)-8, 12-bis[de(2-carboxyethyl)]mesourobilin-IIIα hydrochloride ( 8 ) has been synthesized from the enantiomerically pure 1,4,5,10-tetrahydro-1-oxodipyrrin-9-carboxylic-acid precursor 6a whose absolute configuration was determined by X-ray diffraction analysis of the N-[(S)-1-(1-naphthyl)ethyl] carboxamide 7b . The present results prove unequivocally that an (S,S)-configurated urobilin chromophore displays a negative Cotton effect in the VIS absorption range. However, the helicity of the inherently dissymmetric chromophore remains undetermined.     

Carbon-13 spectra of some tetrahydropyridines. The structure of the tetrahydropyridines from 3,5-lutidine 1-oxide and mercaptans in acetic anhydride

The reaction of 3,5-lutidine 1-oxide ( 1 ) with t-butyl mereaptan in acetic anhydride, with or without triethylamine, was reinvestigated. There was obtained 2-t-butylthio-3,.5-lutidine as the major product, a small quantity of 3-(t-bulylthio)methyl-5-picoline, 1-acetyl-2,3-diacetoxy-3,5-dirnethyl-6-t-butylthio-1,2,3,6-tetrahydropyridine (which represents a structure revision) and l-acetyl-2,6-dihydroxy-3-t-butylthio-3,5-dimethyl-1,2,3,6-tetrahydropyridine. A similar reaction of 1 with 1-adamantyl mercaptan furnished 2-(l-adamantylthio)-3,5-lutidine and 1-acetyl-2,3-diacetoxy-3,5-dimethyl-6-(1-adamantylthio)-1,2,3,6-tetrahydropyridine. The structures of these new tetrahydropyridines were established primarily by carbon-13 nmr spectra.     

Beitrag zur Kenntnis des Systems Vanadin—Chrom—Stickstoff

The System V–Cr–N has been investigated at 1100 and 1400 °C and at nitrogen pressures between 1 and 1000 atmospheres by X-ray techniques. VN and CrN on the one hand and V₂N and Cr₂N on the other are forming complete series of solid solutions. The phase field of the mononitride solid solution is dependent on nitrogen pressure and temperature conditions.

---

---

Auszug aus der Diplomarbeit des Herrn Dipl.-Ing. Dr.W. Schebesta.