Covalent chemistry and conformational dynamics of topologically chiral amide-based molecular knots

The readily available in gram quantities tris(allyloxy)knot of the amide-type 5 (knotane) can be completely and partially deprotected with nBu(3)SnH in the presence of a palladium catalyst resulting in hydroxyknotanes 7-9. These, in turn, react with diethylchlorophosphate giving rise to knotanes equipped with between one and three phosphoryl groups. Sulfonylation of bis(allyloxy)monohydroxyknotane 8 with p-toluenesulfonyl chloride and, following removal of one or two allyl groups from the intermediate monosulfonate 13, give rise to sulfonyloxy-allyloxy-hydroxy- and sulfonyloxy-dihydroxy-knotanes 15 and 14, respectively. This provides a convenient method for the preparation of knotanes with any substitution pattern. All new knotanes have been isolated in preparative amounts and as highly pure substances with an exception of allyloxy-dihydroxyknotane 9. This compound could only be obtained as a mixture with the corresponding monohydroxy-derivative 8. The structures of all synthesized compounds were established by means of FAB and MALDI TOF mass spectrometry, (1)H and (31)P NMR spectroscopy. The triphosphorylated knotane 10 exhibits high solubility in alcohols, allowing its complete enantiomeric resolution with a commercially available chiral HPLC column. (1)H,(1)H DQF-COSY correlation spectroscopy along with H/D exchange experiments and ab initio calculations provided the first detailed (1)H NMR signal assignments of knotanes in [D(6)]DMSO solution. The combination of variable temperature (1)H and (31)P NMR spectroscopy and molecular modeling has been applied to study the conformational behavior of the new knotanes in different solvents. It has been shown that in DMSO solution at room temperature knotanes exist in a relatively rigid nonsymmetrical conformation similar to that found in the solid state while faster conformational exchange leading to the average D(3) symmetrical structure was detected in a number of other solvents.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

Preparation,Characterisation, and Structure of N-Methylated Derivatives of 1,3,5-Triamino-1,3,5-trideoxy-cis-inositol: Polyalcohols with Unusual Acidity

1,3,5-Trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (TDCI) and 1,3,5-trideoxy-1,3,5-tris(trimethylammonio)-cis-inositol (TTCI) were prepared by methylation of 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (TACI). The ability of TDCI to form both intermolecular and intramolecular H-bonds, as demonstrated by X-ray diffraction, is probably responsible for the good solubility of TDCI in almost every common solvent. TTCI was found to be a polyol of unusual high acidity (pK₁ = 8.14 ± 0.02, pK₂ = 13.0 ± 0.2). This phenomenon could be explained by electrostatic interactions between the charged substituents of the cyclohexane residue.     

Stoffwechselprodukte von Mikroorganismen. 177. Mitteilung. Avilamycin C

From cultures of the Avilamycin (Avilamycin A) producing organism, Streptomyces viridochromogenes, strain ETH 23575, a second antibiotic, Avilamycin C, C₆₁H₉₀Cl₂O₃₂ could be isolated in crystalline form. Both Avilamycins belong to the group of the Orthosomycins. By IR., ¹H- and ¹³C-NMR. spectroscopy and by transformation to a common derivative it could be proven that Avilamycin A is a methyl ketone, Avilamycin C the corresponding methyl carbinol.     

Über die Bestimmung der Richtung von Übergangsmomenten in länglichen Molekülen aus Messungen des IR-Dichroismus, 1. Mitt.: Grundlegende theoretische Behandlung

Zusammenfassung Es wird eine allgemeine Beziehung zwischen dem dichroitischen Verhältnis, dem Ausmaß der Orientierung und dem Winkel zwischen der Richtung des Übergangsmomentes und der Molekül-Längsachse abgeleitet. Mit dieser Beziehung ist es prinzipiell möglich, auch bei nicht vollständiger Orientierung der Moleküle eine genaue Bestimmung der Richtung von Übergangsmomenten vorzunehmen.

---

Determination of the direction of transition moments on oblong molecules by measurement of infrared dichroism, I

A general relation between dichroic ratio, degree of orientation and the angle between direction of transition moment and longitudinal axis of the molecule is derived. By this relation it will be possible in prineiple to determine exactly the direction of transition moments even when the molecules of the sample are only partially oriented.

---

---

Mit 3 Abbildungen     

Ion pair generation rates near planar3H and63Ni electron capture detector foils

The ion-pair generation rate (ionization topography) in plasmas from⁶³Ni and particularly Ti³H₄ foils, as used in electron capture detectors, was measured at room temperature using large, parallel plates of low backscattering ability in nitrogen gas of varying density. For one atmosphere pressure, the fall-off of ion pair formation as calculated from the exponential region equalsN ₀·e ^–0.19d for⁶³Ni andN ₀·e ^–1.4d for³H (whereN ₀ is the initial ionization rate immediately adjacent to the foil andd is the distance from the foil in mm). The experimentally measured half ranges (distances from the foil within which 50% of all possible ion pairs are created) are 2.7 mm for⁶³Ni and 0.27 mm for³H. The half ranges calculated from the exponential region where there is less interference from electron backscattering, are 3.7 and 0.5 mm, respectively. The latter values are considered closer to the true, unimpeded ionization topography near planar⁶³Ni and³H foils.Material taken from doctoral thesis     

Utilisation des mélanges H2O+H2SO4+SO3 en tant que solvants: I. Étude du ferrocène et de quelques hydrocarbures polynucléaires dans les mélanges H2O+H2SO4. Comparaison des domaines d'électroactivité

The variation of the electroactivity range with composition of water+ sulphuric acid mixtures has been studied. It is shown that ferrocene provides a reference potential independent of solvent at low H₂SO₄ contents while polynuclear hydrocarbons fulfill the same function at high H₂SO₄ contents. Water+H₂SO₄ mixtures become more oxidizing (reduction limit) and less reducing (oxidation limit) when the H₂SO₄ concentration increases.     

LAH aryl alkyl ether cleavage of BINOL derivatives

Herein we report the cleaving of aryl alkyl ethers on BINOL derivatives, using the common reducing agent LAH. The cleavage of the alkyl oxygen bond is observed when the BINOL derivative is treated with LAH, in refluxing dioxane, for 60 h. The resulting BINOL derivative can then be re-alkylated using a standard Williamson ether synthesis. The same procedure was tested on 6-hydroxy-2-naphthoic acid derivatives and cleavage was not observed, thus suggesting a chelating mechanism for the BINOL ether cleavage.     

Selective, controllable, and reversible aggregation of polystyrene latex microspheres via DNA hybridization

The directed three-dimensional self-assembly of microstructures and nanostructures through the selective hybridization of DNA is the focus of great interest toward the fabrication of new materials. Single-stranded DNA is covalently attached to polystyrene latex microspheres. Single-stranded DNA can function as a sequence-selective Velcro by only bonding to another strand of DNA that has a complementary sequence. The attachment of the DNA increases the charge stabilization of the microspheres and allows controllable aggregation of microspheres by hybridization of complementary DNA sequences. In a mixture of microspheres derivatized with different sequences of DNA, microspheres with complementary DNA form aggregates, while microspheres with noncomplementary sequences remain suspended. The process is reversible by heating, with a characteristic "aggregate dissociation temperature" that is predictably dependent on salt concentration, and the evolution of aggregate dissociation with temperature is observed with optical microscopy.