Effect of calcination temperature on the photocatalytic activity of carbon‐doped titanium dioxide revealed by photoluminescence study

Carbon‐doped titania (C‐TiO₂) nanoparticles were synthesized by the sol–gel method at different calcination temperatures (300–600°C) employing titanium tetraisopropoxide (TTIP) as the titanium source and polyoxyethylene sorbitan monooleate (Tween 80) as the carbon source. The physical properties of C‐TiO₂ samples were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic activities were checked through the photodegradation of phenolphthalein (PHP) under ultraviolet irradiation. The UV spectrum showed that the carbon doping extends the absorption range of TiO₂ to the visible region. However, the photocatalytic activity is affected by the electron–hole recombination phenomenon, as revealed by the photoluminescence (PL) study. According to the PL spectra, carbon doping reduces the edge‐to‐edge electron–hole recombination. Nevertheless, the number of defect sites is greatly influenced by the calcination temperature of C‐TiO₂. C‐TiO₂ that was calcined at 400°C showed the highest photodegradation percentage of PHP, which was mainly attributed to the synergic effect of the low direct edge‐to‐edge electron–hole recombination, high content of defect sites, and retention of active electrons on the surface hydroxyl group.     

Titanium production in a plasma reactor: A feasibility investigation

The feasibility of producing titanium metal from titanium tetrachloride in a thermal plasma under equilibrium and adiabatic expansion conditions has been theoretically investigated. Free energy minimization and adiabatic expansion calculations to simulate a nozzle expansion were used to study the practicality of production. The crucial requirements for the production of titanium powder from TiCl₄ and H₂ appear to be rapid quenching of the plasma gas at high temperature (e.g., 3700 K) and appropriate reactant concentrations. Quenching of tire plasma gas and production of titanium powder can be achieved by adiabatic expansion through a nozzle. Preliminary experimental data indicate that titanium powder of approximately 5 nm in size can be produced in an argon plasma rising a nozzle expansion approach.     

An automated system for the determination of fluoride

A procedure is reported for the automated determination of fluoride by the method of standard addition. Additions of standard are made via a peristaltic pump and the amounts of standard added are computed from the change in weight of the standard in its container on a digital electronic balance.     

Gold-catalyzed cycloisomerizations of 1-(2-(tosylamino)phenyl)prop-2-yn-1-ols to 1H-indole-2-carbaldehydes and (E)-2-(iodomethylene)indolin-3-ols

A method to prepare 1H-indole-2-carbaldehydes and (E)-2-(iodomethylene)indolin-3-ols by gold(I)-catalyzed cycloisomerization of 1-(2-(tosylamino)phenyl)prop-2-yn-1-ols with N-iodosuccinimide (NIS) is reported. The reactions were shown to be operationally simplistic and proceed efficiently for a wide variety of substrates, affording the corresponding products in good to excellent yields (70-99%). The mechanism is suggested to involve activation of the alkyne moiety of the substrate by the gold(I) catalyst. This triggers intramolecular addition of the tethered aniline moiety to give a vinyl gold intermediate, which undergoes iododeauration with NIS to give the (E)-2-(iodomethylene)indolin-3-ol adduct. Subsequent 1,3-allylic alcohol isomerization (1,3-AAI) followed by formylation of this vinyl iodide intermediate then gives the 1H-indole-2-carbaldehyde.     

Colloidal transport phenomena of milk components during convective droplet drying

Material segregation has been reported for industrial spray-dried milk powders, which indicates potential material migration during drying process. The relevant colloidal transport phenomenon and the underlying mechanism are still under debate. This study extended the glass-filament single droplet drying technique to observe not only the drying behaviour but also the dissolution behaviour of the correspondingly dried single particle. At progressively longer drying stage, a solvent droplet (water or ethanol) was attached to the semi-dried milk particle and the interaction between the solvent and the particle was video-recorded. Based on the different dissolution and wetting behaviours observed, material migration during milk drying was studied. Fresh skim milk and fresh whole milk were investigated using water and ethanol as solvents. Fat started to accumulate on the surface as soon as drying was started. At the initial stage of drying, the fat layer remained thin and the solubility of the semi-dried milk particle was much affected by lactose and protein present underneath the fat layer. Fat kept accumulating at the surface as drying progressed and the accumulation was completed by the middle stage of drying. The results from drying of model milk materials (pure sodium caseinate solution and lactose/sodium caseinate mixed solution) supported the colloidal transport phenomena observed for the milk drying. When mixed with lactose, sodium caseinate did not form an apparent solvent-resistant protein shell during drying. The extended technique of glass-filament single droplet approach provides a powerful tool in examining the solubility of individual particle after drying.     

Electron impact mass spectral fragmentation of chiral bisbenzoxazole,bisbenzothiazole and biscarbamide derivatives of 2,2-dimethyl-1,3-dioxolane

The mass spectrometric fragmentation behaviour of five pairs of (R,R)- and (S,S)-4,5-bis(benzoxazol-2-yl)-2,2-dimethyl-1,3-dioxolane derivatives, one pair of (R,R)- and (S,S)-4,5-bis(benzothiazol-2-yl)-2,2-dimethyl-1,3-dioxolanes, and three pairs of (R,R)- and (S,S)-N,N'-bis(2-hydroxyaryl)-2,2-dimethyl-1,3-dioxolane-4,5-dicarbamides, all important compounds for asymmetric catalysis (P. Jiao et al., Tetrahedron Asymmetry 2001; 12: 3081), has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization conditions. The spectral observations have been rationalized in terms of fragment ion structures and fragmentation mechanisms that will provide an aid to spectral interpretation for new compounds of this type.     

Response of a benzoxainone derivative linked to monoaza-15-crown-5 with divalent heavy metals

The response of a monoaza-15-crown-5 with an optically active aminobenzoxazinone moiety to divalent cations was investigated. The crown ether was found to undergo a strong emission shift to the blue when complexed with specific divalent metals that have ionic diameters between 1.9-2.4 A. Consequently the photoactive macrocycle is responsive to Mg(2+), Ca(2+), Ba(2+), Sr(2+), Cd(2+), and particularly responsive to Hg(2+)and Pb(2+). Macrocycle emission spectra are shown to be a function of cation concentration. Alkaline metal cations and smaller transition metals ions such as Ni(2+), Co(2+)and Zn(2+)do not cause significant changes in the macrocycle emission spectra. Emission, absorption, and complex stability constants are determined. Mechanisms of cation selectivity and spectral emission shifts are discussed. Challenges involving immobilization of the macrocycle while preserving its spectral response to cations are explored.     

Ligand-assisted reduction of osmium tetroxide with molecular hydrogen via a [3+2] mechanism

Osmium tetroxide is reduced by molecular hydrogen in the presence of ligands in both polar and nonpolar solvents. In CHCl3 containing pyridine (py) or 1,10-phenanthroline (phen), OsO4 is reduced by H2 to the known Os(VI) dimers L2Os(O)2(mu-O)2Os(O)2L2 (L2 = py2, phen). However, in the absence of ligands in CHCl3 and other nonpolar solvents, OsO4 is unreactive toward H2 over a week at ambient temperatures. In basic aqueous media, H2 reduces OsO4(OH)n(n-) (n = 0, 1, 2) to the isolable Os(VI) complex, OsO2(OH)4(2-), at rates close to that found in py/CHCl3. Depending on the pH, the aqueous reactions are exergonic by deltaG = -20 to -27 kcal mol(-1), based on electrochemical data. The second-order rate constants for the aqueous reactions are larger as the number of coordinated hydroxide ligands increases, k(OsO4) = 1.6(2) x 10(-2) M(-1) s(-1) < k(OsO4(OH)-) = 3.8(4) x 10(-2) M(-1) s(-1) < k(OsO4(OH)2(2-)) = 3.8(4) x 10(-1) M(-1) s(-1). The observation of primary deuterium kinetic isotope effects, k(H2)/k(D2) = 3.1(3) for OsO4 and 3.6(4) for OsO4(OH)-, indicates that the rate-determining step in each case involves H-H bond cleavage. Density functional calculations and thermochemical arguments favor a concerted [3+2] addition of H2 across two oxo groups of OsO4(L)n and argue against H* or H- abstraction from H2 or [2+2] addition of H2 across one Os=O bond. The [3+2] mechanism is analogous to that of alkene addition to OsO4(L)n to form diolates, for which acceleration by added ligands has been extensively documented. The observation that ligands also accelerate H2 addition to OsO4(L)n highlights the analogy between these two reactions.     

Competition between pi and non-pi cation-binding sites in aromatic amino acids: a theoretical study of alkali metal cation (Li+, Na+, K+)-phenylalanine complexes

To understand the cation-pi interaction in aromatic amino acids and peptides, the binding of M(+) (where M(+) = Li(+), Na(+), and K(+)) to phenylalanine (Phe) is studied at the best level of density functional theory reported so far. The different modes of M(+) binding show the same order of binding affinity (Li(+)>Na(+)>K(+)), in the approximate ratio of 2.2:1.5:1.0. The most stable binding mode is one in which the M(+) is stabilized by a tridentate interaction between the cation and the carbonyl oxygen (O[double bond]C), amino nitrogen (--NH(2)), and aromatic pi ring; the absolute Li(+), Na(+), and K(+) affinities are estimated theoretically to be 275, 201, and 141 kJ mol(-1), respectively. Factors affecting the relative stabilities of various M(+)-Phe binding modes and conformers have been identified, with ion-dipole interaction playing an important role. We found that the trend of pi and non-pi cation bonding distances (Na(+)-pi>Na(+)-N>Na(+)-O and K(+)-pi>K(+)-N>K(+)-O) in our theoretical Na(+)/K(+)-Phe structures are in agreement with the reported X-ray crystal structures of model synthetic receptors (sodium and potassium bound lariat ether complexes), even though the average alkali metal cation-pi distance found in the crystal structures is longer. This difference between the solid and the gas-phase structures can be reconciled by taking the higher coordination number of the cations in the lariat ether complexes into account.