Scanning electrochemical microscopy (SECM) was used to monitor in situ hydrogen peroxide (H2O2) produced at a polarized water/1,2-dichloroethane (DCE) interface. The water/DCE interface was formed between a DCE droplet containing decamethylferrocene (DMFc) supported on a solid electrode and an acidic aqueous solution. H2O2 was generated by reducing oxygen with DMFc at the water/DCE interface, and was detected with a SECM tip positioned in the vicinity of the interface using a substrate generation/tip collection mode. This work shows unambiguously how the H2O2 generation depends on the polarization of the liquid/liquid interface, and how proton-coupled electron transfer reactions can be controlled at liquid/liquid interfaces. 相似文献
Attractive chlorine : Noncovalent interactions between chlorine or bromine atoms and aromatic rings in proteins open up a new method for the manipulation of molecular recognition. Substitution at distinct positions of two factor Xa inhibitors improves the free energy of binding by interaction with a tyrosine unit. The generality of this motif was underscored by multiple crystal structures as well as high‐level quantum chemical calculations (see picture).
This paper describes a new type of surface imprinting technique that combines the advantages of both the semi‐covalent approach and one‐stage miniemulsion polymerization. This process has been successfully applied for the preparation of glucose surface‐imprinted nanoparticles. The selective artificial receptors for glucopyranoside were fully characterized by IR, TEM and BET analyses, and their molecular recognition abilities by binding experiments carried out in batch processes. The molecular affinity and selectivity of the glucose molecularly imprinted polymers were accurately quantified. These characteristics are essential for verification of the efficiency of the developed surface imprinting process. The imprinting effect was clearly demonstrated using the batch rebinding method. We have found that the glucose imprinted polymers produced using the optimized one‐stage mini‐emulsion exhibited quite fast kinetics of binding and equilibration with glucopyranoside templates, compared to polymers prepared by bulk polymerization technique, as well as extremely low levels of unspecific bindings. We also demonstrated that glucose molecular imprinted polymer (MIP) exhibited very good selectivity for its original template compared to other glycopyranoside derivatives, such as galactose. Finally, the extraction of the binding properties from isotherms of binding by fitting to the bi‐Langmuir and Freundlich models allowed the determination of the affinity constant distribution of the binding sites. This imprinting protocol allowed the determination of an affinity constant (KD), involving exclusively H‐bonding interactions, for the glucose MIP ( P2C ) with the best template 1 , in CH3CN as the solvent system.
Solvent free high‐temperature oxidations of rare earth metals with the heterocycle pyrazole as well as in low to non‐coordinating solvents were investigated to isolate intermediate stages between monomeric and polymeric pyrazolates of the lanthanides. Reaction conditions were tuned according to simultaneous DTA/TG and temperature dependent X‐ray powder diffraction experiments on known monomeric and polymeric pyrazolates, that gave rise to the idea that further structure intermediates could be isolated. Reactions in 1,2,3,4‐tetrahydroquinoline gave the dimeric complex [Gd2(Pz)6(PzH)4](PzH)(Tech) ( 1 ) as well as the triangular complex [Nd3(Pz)9(PzH)2](PzH)(Tech)2 ( 2 ). The solvent free melt synthesis resulted in a new polymeric form of ( 3 ) (pyrazole, PzH = C3H3NNH; pyrazolate anion, Pz? = C3H3NN?; 1,2,3,4‐tetrahydroquinoline, Tech = C9H13N). All three compounds contain coordinating pyrazolate amide groups and pyrazole molecules the latter decreasing in numbers upon condensation of the building units. According to simultaneous DTA/TG/MS investigations the condensation process can be identified with the release of pyrazole molecules. 1 consists of dimeric molecules containing trivalent gadolinium with a C.N. of eight. The two gadolinium atoms show different coordination polyhedra. Only σ coordination and bridging is found for 1 . 2 consists of trimeric molecules containing trivalent neodymium. The neodymium atoms also exhibit different coordination polyhedra with C.N.s of eight and nine. Both π and σ coordination is found for 2 , the π coordinating pyrazolate ligands acting as lids of the triangular units. Topological analysis of the electron localization function (ELF) for 2 calculated at the scalar‐relativistic DFT level reveals only weakly covalent π donor η5‐Pz–Nd interactions compared to the stronger covalent σ donor Pz–Nd interactions. The topological analysis of both, the ELF and the electron density reveals no significant differences of the respective charges of the Nd atoms. 3 exhibits a one‐dimensional chain structure with EuII and a C.N of ten. It can thus be addressed the β form of the referring formula with a new arrangement of the coordinating ligands. Like the α form 3 shows σ and π coordination of pyrazole and pyrazolate ligands. Simultaneous DTA/TG analysis reveals that the low‐temperature α form shows a phase transition into the β form between 110 °C and 130 °C. The three compounds were investigated by low‐temperature single crystal X‐ray analysis, Mid IR and Far IR spectroscopy. 相似文献
Colloids embedded in a silica sol-gel matrix were prepared by using fully alloyed Pd-Au colloids, and pure Pd and Au colloids stabilized with tetraalkylammonium bromide following a modified sol-gel procedure with tetrahydrofuran (THF) as the solvent. Tetraethoxysilicate (TEOS) was used as the precursor for the silica support. The molar composition of the sol was TEOS/THF/H2O/HCl = 1:3.5:4:0.05 for the bimetallic Pd-Au and TEOS/THF/H2O/HCl = 1:4.5:4:0.02 for Pd and Au monometallic systems. After refluxing, the colloid was added as a 4.5 wt % solution in THF for Pd-Au, 10.2 wt % solution in THF for Pd and 8.4 wt % solution in THF for Au at room temperature. The gelation was carried out with vigorous stirring (4 days) under an Ar atmosphere. Following these procedures, bimetallic Pd-Au-SiO2 catalysts with 0.6 and 1 wt % metal, and monometallic Pd- and Au-SiO2 catalysts with 1 wt % metal were prepared. These materials were further treated following four different routes: 1) by simple drying, 2) in which the dried catalysts were calcined in air at 723 K and then reduced at the same temperature, 3) in which they were directly reduced in hydrogen at 723 K, and 4) in which the surfactant was extracted using an ethanol-heptane azeotropic mixture. The catalysts were characterized by nitrogen adsorption-desorption isotherms at 77 K, H2 chemisorption measurements, solid-state 1H, 13C, 29Si-CP/MAS-NMR spectroscopy, powder X-ray diffraction (XRD), small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and 197Au M?ssbauer spectroscopy. The physical characterization by a combination of these techniques has shown that the size and the structural characteristics of the Pd-Au colloid precursor are preserved when embedded in an SiO2 matrix. Catalytic tests were carried out in selective hydrogenation of 3-hexyn-1-ol, cinnamaldehyde, and styrene. These data showed evidence that alloying Pd with Au in bimetallic colloids leads to enhanced activity and most importantly to improved selectivity. Also, the combination of the two metals resulted in catalysts that were very stable against poisoning, as was evidenced for the hydrogenation of styrene in the presence of thiophene. 相似文献
We have used chlorophyll fluorescence, delayed luminescence and thermoluminescence measurements to study the influence of an artificial DeltapH in the presence or absence of zeaxanthin on photosystem II reactions. Energization of the pea thylakoid membranes induced non-photochemical fluorescence quenching and an increase in the overall luminescence emission of PSII during delayed luminescence and thermoluminescence measurements. This DeltapH-induced overall luminescence increase was caused by a strongly enhanced delayed luminescence in the seconds range before sample heating. In the subsequent thermoluminescence measurements the intensity of the B-band decreased after one and increased after two or more single turnover flashes. We propose that strong membrane energization shifted the redox potential of photosystem II radical pairs to more negative values causing the high delayed luminescence. The zeaxanthin-dependent non-photochemical fluorescence quenching component, however, did not alter thermoluminescence B-bands but decreased the delayed luminescence intensity by 30%. To our knowledge this is the first report that the radiative radical pair recombination, exhibited as delayed luminescence but not thermoluminescence emission, is sensitive to the antenna located zeaxanthin related non-photochemical fluorescence quenching. Our data can be interpreted within the frame of the exciton/radical pair equilibrium model that describes photosystem II as a shallow trap and incorporates the transfer of energy from the re-excitated reaction centre to the antenna of photosystem II. 相似文献
The electron localization function (ELF) is implemented in the first-principles, all-electron, full-potential local orbital method. This full-potential implementation increases the accuracy with which the ELF can be computed for crystalline materials. Some representative results obtained are presented and compared with the results of other methods. Although for crystal structures with directed bonding only minor differences are found, in simple elemental metals, there are differences in the valence region, which give rise to different ELF topologies. 相似文献
In gas chromatography (GC), temperature programming is often considered to be the second most important parameter to control, the first being column selectivity. A radically new GC technology to achieve ultrafast temperature programming with an unprecedented cool down time and low power consumption has recently become available. This technology is referred to as low thermal mass GC (LTMGC). Though the technology has its roots in resistive heating, which forms the basis of principle and design concept, the approach taken to achieve ultrafast heating and cool down time by LTMGC represents a significant break-through in GC. Despite some rectifiable shortcomings, LTMGC has proven to be an ideal methodology to deliver near/real time GC data, high precision, and high throughput applications. It is a new approach for modern high-speed GC. This paper documents the fundamental design principles behind LTMGC, performance data, and examples of applications investigated. 相似文献
A new ultra-performance liquid chromatography-electrospray tandem mass spectrometry (UPLC-ESI-MS/MS) method was developed to perform the determination of 16 mutagenic heterocyclic amines (HAs) in complex food samples in less than 2 min. The UPLC separation was carried out using an Acquity BEH C18 column (50 mm x 2.1 mm i.d., 1.7 microm particle size) that provided high efficiency and resolution in combination with high linear velocities. The UPLC system was coupled to the triple quadrupole Waters Micromass Quattro Premier. This system permits high-speed data acquisition without peak intensity degradation which is required to monitor the narrow chromatographic peaks (1-2 s) of HAs. The determination was performed in selected reaction monitoring (SRM) mode. The quality parameters of the developed method were established, obtaining instrumental LODs lower than 0.23 pg injected and a repeatability at low concentration level lower than 9.1% CV (n = 6). To evaluate the performance of the method in high throughput analysis of complex samples, the UPLC-MS/MS method was applied to the analysis of HAs in two meat extracts. 相似文献