Biotransformation of (−)β-pinene by Aspergillus niger ATCC 9642

The main objective of this work was to investigate the biotransformations of (−)α-pinene, (−)β-pinene, and (+) limonene by Aspergillus niger ATCC 9642. The culture conditions involved—concentration of cosolvent (EtOH), substrate applied, and sequential addition of substrates—were investigated. Adaptation of the precultures with small amounts of substrate was also studied. The experiments were performed in conical flasks with liquid cultures. This strain of A. niger was able to convert only (−)β-pinene into α-terpineol. An optimum conversion of (−)β-pinene into α-terpineol of about 4% was obtained when the substrate was applied as a diluted solution in EtOH and sequential addition of substrate was used.     

Quantitative determination of element distributions in silicon based thin film solar cells using SNMS

The determination of elemental distributions in thin film solar cells based on amorphous silicon using electron beam SNMS is possible by quantifying the measured ion intensities. The relative sensitivity factors (RSFs) for all elements measured have to be known. The RSFs have been determined experimentally using implantation and bulk standards with known concentrations of the interesting elements. The measured RSFs have been compared with calculated RSFs. The model used for the calculation of the RSFs takes into account the probability for electron impact ionization and the dwell time of the neutrals inside the postionization region. The comparison between measured and calculated RSF shows, that this model is capable to explain the RSFs for most elements. Differences between calculated and measured values can be explained by the formation of hydride and fluoride molecules (in case of H and F) and influences of the angular distribution of the sputtered neutrals in case of Al. The experimentally determined RSFs have been used for a quantification of depth profiles of the i-, buffer-, p- and front contact layers of a-Si solar cells.     

Practical and quality-control aspects of multi-element analysis with quadrupole ICP–MS with special attention to urine and whole blood

Two screening methods were developed for rapid analysis of a great number of urine and blood samples within the framework of an exposure check of the population after a firework explosion. A total of 56 elements was measured including major elements. Sample preparation consisted of simple dilution. Extensive quality controls were applied including element addition and the use of certified reference materials. Relevant results at levels similar to those found in the literature were obtained for Co, Ni, Cu, Zn, Sr, Cd, Sn, Sb, Ba, Tl, and Pb in urine and for the same elements except Ni, Sn, Sb, and Ba in blood. However, quadrupole ICP–MS has limitations, mainly related to spectral interferences, for the analysis of urine and blood, and these cause higher detection limits. The general aspects discussed in the paper give it wider applicability than just for analysis of blood and urine—it can for example be used in environmental analysis.     

Kit for instant 99mTc labeling of the antimicrobial peptide ubiquicidin 29-41

Summary The ubiquicidin 29-41 fragment (UBI) is a cationic antimicrobial peptide. The aim of this study was to develop an instant kit formulation for the preparation of ^99mTc-UBI 29-41 in high radiochemical yield and to evaluate its use as an infection imaging agent in humans. The components were selected to produce a direct ^99mTc labeling, presumably to the amine groups of Lys and Arg7. ^99mTc-UBI 29-41 obtained from the lyophilized kit showed radiochemical purity of >97% with an average target/non-target ratio of 2.3±0.6 in positive infection sites at 2 hours. Kits were stable at 4 °C for over 6 months.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Direct observation of cations and polynucleotides explains polyion adsorption to like-charged surfaces

We show an experimental approach for directly observing the condensation of polynucleotides and their electrolyte counterions at a liquid/solid interface. X-ray standing waves (XSW) generated by Bragg diffraction from a d = 20 nm Si/Mo multilayer substrate are used to measure the distinct distribution profiles of the polyanions and simple cations along the surface normal direction with subnanometer resolution. The 1D spatial sensitivity of this approach is enhanced by observing the XSW induced fluorescence modulations over multiple orders of Bragg peaks. We study the interesting divalent cation driven adsorption of anionic polynucleotides to anionic surfaces by exposing a hydroxyl-terminated silica surface to an aqueous solution with ZnCl2 and mercurated poly-uridylic acid (a synthetic RNA molecule). The in situ long-period XSW measurements are used to follow the evolution of both the Zn and Hg distribution profiles during the adsorption process. The conditions and physical mechanisms that govern the observed divalent cation adsorption and subsequent polynucleotide adsorption to an anionic surface are explained by a thermodynamic model that incorporates nonlinear electrostatic effects.     

Cobalt-mediated approach for the synthesis of terpene-based hybrids

[structure: see text] Dicobalt-beta-pinene hybrids of types I and II have been prepared using a Nicholas reaction between propargyl derivatives, obtained from commercial (1R)-(-)-myrtenal, and different aromatic nucleophiles. The method is suitable for the preparation of densely functionalized bio-organometallic natural product-based hybrids, as demonstrated by the preparation of a beta-pinene-neoclerodane hybrid.     

UVA exposure affects UVB and cis-urocanic acid-induced systemic suppression of immune responses in Listeria monocytogenes-infected Balb/c mice

Ultraviolet radiation can inhibit immune responses locally as well as systemically. Such effects have been measured in animals and humans exposed to ultraviolet B (wavelength 280-315 nm) (UVB) and ultraviolet A (315-400 nm) (UVA). The precise wavelength dependence is important for the identification of possible molecular targets and for assessments of risk of different artificial UV sources and solar UV. In such analyses, it is commonly assumed that radiation energy from each wavelength contributes to the effect independent of the other wavelengths. Here we show that this assumption does not hold good. In the present study, it was investigated whether exposure to broadband UVA or longwave ultraviolet A 1 (340-400 nm) (UVA 1) prior to the standard immunosuppressive UVB protocol might modulate the immunosuppressive effects induced by UVB. Preexposure to broadband UVA or longwave UVA 1, 1 day prior to the standard immunosuppressive UVB protocol, inhibited the UVB-induced suppression of delayed type hypersensitivity (DTH) to Listeria monocytogenes significantly. This effect was not associated with restoring the number of interleukin (IL-12)-positive cells in the spleen. Since isomerization of trans-urocanic acid (UCA) into the immunosuppressive cis-UCA isomer plays a crucial role in UVB-induced immunomodulation, in a second set of experiments it was investigated whether immunosuppression induced by cis-UCA might also be downregulated by preexposure to UVA. Animals were exposed to broad-band UVA or longwave UVA 1 prior to application of an immunosuppressive dose of cis- or trans-UCA as a control. Both UVA and UVA 1 appear to inhibit the cis-UCA-induced systemic immunosuppression (DTH and IL-12) to L. monocytogenes. These studies clearly show that UVA radiation modulates both UVB and cis-UCA-induced immunomodulation. In general, our studies indicate that both broadband UVA and longwave UVA 1 could induce modulation of UVB and cis-UCA-induced immunomodulation. As sunlight contains both UVA and UVB radiation the balance between these two radiations apparently determines the net immunomodulatory effect.     

Virtual darwinian drug design: QSAR inverse problem, virtual combinatorial chemistry, and computational screening

The generation of diversity and its further selection by an external system is a common mechanism for the evolution of the living species and for the current drug design methods. This assumption allows us to label the methods based on generation and selection of molecular diversity as "Darwinian" ones, and to distinguish them from the structure-based, structure-modulation approaches. An example of a Darwinian method is the inverse QSAR. It consists of the computational generation of candidate chemical structures and their selection according to a previously established QSAR model. New trends in the field of combinatorial chemical syntheses comprise the concepts of virtual combinatorial synthesis and virtual or computational screening. Virtual combinatorial synthesis, closely related to inverse QSAR, can be defined as the computational simulation of the generation of new chemical structures by using a combinatorial strategy to generate a virtual library. Virtual screening is the selection of chemical structures having potential desirable properties from a database or virtual library in order to be synthesized and assayed. This review is mainly focused on graph theoretical drug design approaches, but a survey with key references is provided that covers other simulation methods.     

One tool to bring them all: Au-catalyzed synthesis of B,O- and B,N-doped PAHs from boronic and borinic acids

The isoelectronic replacement of C C bonds with ⁻B N⁺ bonds in polycyclic aromatic hydrocarbons (PAHs) is a widely used tool to prepare novel optoelectronic materials. Far less well explored are corresponding B,O-doped PAHs, although they have a similarly high application potential. We herein report on the modular synthesis of B,N- and B,O-doped PAHs through the [Au(PPh₃)NTf₂]-catalyzed 6-endo-dig cyclization of BN–H and BO–H bonds across suitably positioned C C bonds in the key step. Readily available, easy-to-handle o-alkynylaryl boronic and borinic acids serve as starting materials, which are either cyclized directly or first converted into the corresponding aminoboranes and then cyclized. The reaction even tolerates bulky mesityl substituents on boron, which later kinetically protect the formed B,N/O-PAHs from hydrolysis or oxidation. Our approach is also applicable for the synthesis of rare doubly B,N/O-doped PAHs. Specifically, we prepared 1,2-B,E-naphthalenes and -anthracenes, 1,5-B₂-2,6-E₂-anthracenes (E = N, O) as well as B,O₂-containing and unprecedented B,N,O-containing phenalenyls. Selected examples of these compounds have been structurally characterized by X-ray crystallography; their optoelectronic properties have been studied by cyclic voltammetry, electron spectroscopy, and quantum-chemical calculations. Using a new unsubstituted (B,O)₂-perylene as the substrate for late-stage functionalization, we finally show that the introduction of two pinacolatoboryl (Bpin) substituents is possible in high yield and with perfect regioselectivity via an Ir-catalyzed C–H borylation approach.

Singly and doubly B,E-doped PAHs were synthesized using a protocol that starts from easy-to-handle boronic and borinic acids and offers the possibility to choose between the preparation of B,O- and B,N-PAHs in the final reaction step.