Low-frequency and high-frequency relaxations in dynamic electric birefringence of poly(γ-benzyl-L-glutamate) in m-cresol

The dc component Δn of the electric birefringence of poly(γ-benzyl-L -glutamate) in m-cresol is measured under an ac electric field at frequencies from 0.5 Hz to 200 kHz for solutions covering the dilute and semidilute regions. The dispersion curve indicates that at low frequencies Δn decreases with increasing frequency (low-frequency relaxation). For high-molecular-weight polymers at high concentration, Δn becomes negative at high frequency and its absolute value decreases with further increase in frequency (high-frequency relaxation). A unified theory for the two relaxations is developed on the basis of a model in which, in the semidilute regime, the rodlike polymer is confined in a cage formed by neighboring polymers and the lifetime of the cage lies between relaxation times of the two relaxations. The low-frequency relaxation is ascribed to end-over-end rotation of the polymer and the high-frequency relaxation to the rotation within a limited angle in the cage. The dependences of relaxation parameters on polymer concentration and molecular weight are reasonably explained by the theory.     

Dispersion relation approach to the anomalous magnetic moment in gauge theories

The reason why the dispersion relations for the anomalous magnetic moment are not valid in gauge theories is explained. New sum rules are derived based on unitary bounds of scattering amplitudes. In gauge theories these sum rules give the correct values for the anomalous magnetic moment, while, in the case of conventional renormalizable theories which contain no massive vector bosons, they are identical with the usual dispersion relations for the anomalous magnetic moment.     

Neutralization of static electricity charged on running vinyl chloride sheet by the use of soft beta-ray sources (author's transl)

The feasibility of 147Pm and 3H beta-ray sources as static eliminator was experimentally investigated. A sheet of vinyl chloride of 0.1 mm in thickness was used as an example of electrified materials. Its surface charge densities before and after beta-ray neutralization were measured as the function of electrostatic charge changing the speed of the sheet and the distance between the beta-ray source and the sheet. With a 147Pm beta-ray source of 200mCi in effective activity, almost complete neutralization was found for the sheet with the charge density less than 6 X 10(-6) C/m2 running at the speed of 0.18 m/s. In the case of the running speed of 0.5 m/s frequently used in industry, the electrostatic charge below 3 X 10(6) C/m2, where corona discharger is not so effective, was also perfectly eliminated. It was found that the optimal distance between the beta-ray source and the sheet was 10 cm in the case of 147Pm. The use of 3H beta-ray source of 1 Ci was not satisfactory. These results demonstrate that 147 Pm beta-ray source operates most efficiently as static eliminator when the charge density of material and/or its moving speed is not high.     

Synthesis of DTPA-conjugated (1,4)-linked 2-aminoglycosides varying in the anomeric configuration and their MRI contrast effect

We describe the efficient synthesis of DTPA-conjugated oligosaccharides composed of alpha- and/or beta-linked tri to monoglucosamines. Gd(iii) complex with DTPA-conjugated chitotriitol has been reported to be an effective MRI contrast agent. In order to elucidate the structure-property relationships, we planned to synthesize the DTPA-conjugated 2-amino-tri-, di-, and monosaccharides varying in configuration at the anomeric positions and the C2 position on the reducing end. Our strategy for the synthesis of the DTPA-conjugated oligosaccharides involves O-perbenzyl protected 2-amino-tri-, di-, and monosaccharides as key intermediates. The 2-aminoglycosides were prepared by non-selective glycosidation of 2-azido-2-deoxyglycosyl donors, followed by separation of two anomeric isomers. Although the synthesis involves separation of the stereoisomers, it circumvents not only the careful tuning of reaction conditions, but also the time-consuming preparation of glycosyl donors attached to different protecting groups. The protected 2-aminoglycosides were converted to the fully deprotected DTPA-conjugated tri- to monosaccharides by the same operation. MRI phantom study using the Gd(III) complexes of DTPA-conjugated oligosaccharides indicates that the number of the monosaccharide units was critical for enhancing the relative signal intensity of water protons per Gd, and various stereoisomers would be candidate scaffolds for MRI contrast agents.     

Possible one-dimensional 3He quantum fluid formed in nanopores

Heat capacity measurements have been made down to 5 mK for 3He fluid films adsorbed in one-dimensional (1D) nanometer-scale pores, 28 A in diameter, preplated with 4He of 1.47 atomic layers. At low 3He density, the heat capacity shows a density-dependent, Schottky-like peak near 150 mK asymptoting to the value corresponding to a 2D Boltzmann gas at high temperatures. The peak behavior is attributed to the crossover from a 2D gas to a 1D state at low temperatures. The degenerate state of the 1D 3He fluid is indicated by a predominantly linear temperature dependence below about 30 mK.     

High-performance optical code generation and recognition by use of a 511-chip, 640-Gchip/s phase-shifted superstructured fiber Bragg grating

The generation and recognition of a record-length 511-chip optical code is experimentally demonstrated by use of a superstructured fiber Bragg grating (SSFBG) with a chip rate of 640 Gchips/s. Very high reflectivity (92%) is achieved with high-quality correlation properties. The temperature deviation tolerance is approximately +/- 0.3 degrees C, which is within the package's temperature stability range (+/- 0.1 degrees C). Experimental results show good agreement with the theory. They indicate the SSFBG's potential for processing a long optical code with an ultrahigh chip rate, which could significantly improve the system's performance.     

Rapidity dependence of charged antihadron to hadron ratios in Au+Au collisions at sqrt[s(NN)]=200 GeV

We present ratios of the numbers of charged antihadrons to hadrons (pions, kaons, and protons) in Au+Au collisions at sqrt[s(NN)]=200 GeV as a function of rapidity in the range y=0-3. While the ratios at midrapidity are approaching unity, the K(-)/K(+) and p;/p ratios decrease significantly at forward rapidities. An interpretation of the results within the statistical model indicates a reduction of the baryon chemical potential from mu(B) approximately 130 MeV at y=3 to mu(B) approximately 25 MeV at y=0.     

A new strategy for the design of water-soluble synthetic receptors: specific recognition of DNA intercalators and diamines

Water-soluble zinc bisporphyrin receptors 1 and 2 having two Lewis acidic sites (zinc) in the hydrophobic environment consisting of alkyl chains and a bisporphyrin framework, and covered with hydrophilic exterior (twelve or eighteen carboxyl groups) were prepared. The receptors show high affinity for diamines and DNA intercalators in water where the binding constants K(a) are of the order of 10(7) and 10(8) M(-1), respectively. Diamines and DNA intercalators are bound to the receptor through different mechanisms. Diamines are bound through hydrophobic interactions and zinc-nitrogen interactions, while DNA intercalators are bound through hydrophobic interactions and charge-transfer interactions. Flexible alkyl chains can make van der Waals contact with guests and create a hydrophobic environment around the bound guest by an induced-fit-type mechanism. For the binding of DNA intercalators, the following features are noteworthy: 1). Binding constants are similar between the zinc porphyrins and zinc-free porphyrins; 2). the binding constant is larger for the guest having the lower LUMO; this indicates the important contribution of charge-transfer interactions to binding; 3). the hydrophobic and cationic nature of DNA intercalators is substantially important, and 4). higher ionic strength reduced the binding affinities; this shows a moderate contribution of electrostatic interactions. The conformational instability of the receptors also contributes to the tight binding: hydrophobic and electrostatic interactions cannot both be favorable at the same time in the guest-free receptor. Enthalpy-entropy compensation observed for the binding of diamines and DNA intercalators is characterized by a relatively small slope (alpha=0.74) and a large intercept (beta=7.75 kcal mol(-1)) in the DeltaH degrees versus TDeltaS degrees plot; this shows that a conformational change of receptors and a significant desolvation occur upon binding. The receptor can competitively bind to propidium iodide to deprive DNA of the intercalated propidium iodide. These features of water-soluble receptors consisting of a rigid framework and flexible side chains with a large solvent-accessible area are in contrast to highly preorganized rigid receptors, and they can provide useful guidelines for rational design of induced-fit artificial receptors in water.     

Construction of a square-planar hydroperoxo-copper(II) complex inducing a higher catalytic reactivity

A novel hydroperoxo-copper(II) complex with a square-planar geometry has been prepared, which has exhibited a higher selectivity and catalytic reactivity for dimethyl sulfide, in contrast to that with a trigonal-bipyramidal one.     

Preparation of organic-inorganic composites containing rod-like phthalocyanine polymers

Sol-gel polymerization of tetraethoxysilane in the presence of amphiphilic phthalocyanine polymer 2 produced organic-inorganic composites with the rod-like phthalocaynine polymers incorporated within ordered hexagonal channels.