Röntgenkleinwinkeluntersuchungen an Lösungen eines Polystyrolpräparates mit enger Molekulargewichtsverteilung

Zusammenfassung Es wurde das Streuverhalten von Polystyrol im thermodynamisch schlechten Lösungsmittel Cyclohexan zwischen Entmischungstemperatur und-Temperatur untersucht. Beim -Punkt und nahe dabei liegt das Verhalten eines statistisch verknäuelten Fadenmoleküls vor. Unterhalb der-Temperatur beginnt eine Aggregation. Knapp oberhalb der Entmischungstemperatur entspricht das Molekulargewicht etwa einer Verhängung zweier Fadenmoleküle. Ein Auftreten von kompakten Polymerknäueln ist bei dieser Temperatur nicht festzustellen. Der Einfluß des Fadenquerschnitts auf die Streukurve ist beträchtlich, da der Querschnitt nicht viel kleiner als die Persistenzlänge ist. Trotzdem läßt sich die Persistenzlänge (a=12,2 Å) aus dem Übergangspunkt zwischen den etwa 1/(2)² und 1/(2) proportionalen Bereichen bestimmen, da der Knick im Übergangsbereich infolge der großen Anzahl von Persistenzlängen pro Molekül sehr ausgeprägt ist.

---

X-Ray small-angle investigations on solutions of a polystyrene sample with a narrow molecular weight distribution

Investigations were made of the scattering behaviour of polystyrene in the thermodynamically bad solvent cyclohexane between precipitation-temperature and-temperature. At the-point and close to it the behaviour of a statistically coiled chain molecule is found. Below-temperature an aggregation is beginning. Just above precipitation-temperature the molecular weight corresponds to an entanglement of two chain molecules. Appearance of compact polymer coils could not be noted at this temperature. The influence of the chain crosssection upon the scattering curve is considerable as the crosssection is not much smaller than the persistence length. Nevertheless, the persistence length (a=12.2 Å) may be determined from the transition point between the ranges roughly proportional to 1/(2)² and 1/(2) as the break within the transition range is very distinct on account of the great number of persistence lengths per molecule.

---

---

Mit 3 Abbildungen

---

Herrn Prof. Dr.E. Broda zum 60. Geburtstag gewidmet.     

Optical properties of ZnO and ZnO:In nanorods assembled by sol-gel method

Self-assembled zinc oxide (ZnO) and indium-doping zinc oxide (ZnO:In) nanorod thin films were synthesized on quartz substrates without catalyst in aqueous solution by sol-gel method. The samples were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), Raman-scattering spectroscopy, room-temperature photoluminescence (PL) spectra, and temperature-dependent PL spectra measurements. XRD and Raman spectra illustrated that there were no single In2O3 phase in ZnO lattice after indium doping. The PL spectra of ZnO showed a strong UV emission band located at 394 nm and a very weak visible emission associated with deep-level defects. Indium incorporation induced the shift of optical band gap, quenching of the near-band-edge photoluminescence and enhanced LO mode multiphonon resonant Raman scattering in ZnO crystals at different temperatures. Abnormal temperature dependence of UV emission integrated intensity of ZnO and ZnO:In samples is observed. The local state emission peak of ZnO:In samples at 3.37 eV is observed in low-temperature PL spectra. The near-band-edge emission peak at room temperature was a mixture of excitons and impurity-related transitions for both of two samples.     

Synthesis and Conformational Analysis of the Multidrug Resistance-Reversing Agent Hapalosin and Its Non-N-methyl Analog

Hapalosin was initially synthesized by macrolactonization, and a second synthesis was achieved by cycloamidation. In both syntheses, three of the five stereocenters in hapalosin were established by two Brown allylboration reactions. The synthesis of the non-N-Me analog of hapalosin involved chelation-controlled reduction of a gamma-amino-beta-keto ester and cycloamidation. In CDCl(3) at 25 degrees C, synthetic hapalosin exists as a 2.3:1 mixture of conformers, while its non-N-Me analog exists only as a single conformer. (1)H,(1)H-NOESY and computation reveal that the configuration of the amide bond is responsible for the conformations of the two compounds. The major conformer of hapalosin is found to be an s-cis amide, the minor conformer an s-trans amide, and the non-N-Me analog an s-trans amide. Applying distance constraints to protons that exhibit NOESY correlations, computation shows that the major conformer of hapalosin and the non-N-Me analog have very different conformations. By contrast, the minor conformer of hapalosin and the non-N-Me analog have very similar conformations.     

Adsorption of 1,10-phenanthroline within a dodecanethiol monolayer: an approach to a switchable electrode surface

A simple method was used to prepare a "switchable" electrode surface by using self-assembled monolayers of dodecanethiol on a gold electrode. The dodecane-modified electrode was electrochemically inactive until the monolayer was soaked in solutions of 1,10-phenanthroline or 2,2'-bipyridine. The electroactive form of the electrode could be reverted back to the nonelectroactive form by rinsing the electrode. Surface IR results showed that both dodecanethiol and 1,10-phenanthroline exist in the mixed monolayer.     

Investigation of electronic structure and associated nuclear quadrupole interaction of adsorbed fluorine atoms on silicon surface

The electronic energy levels and wave functions of fluorine and chlorine atoms adsorbed at the <111> surface of silicon are obtained by the Hartree-Fock procedure applied to clusters simulating the surface structure. Minimising the total energy with respect to the positions of the halogen atoms, the Si-Cl distance in the adsorbed system was found to be in good agreement with that from a recent SEXAFS measurement, there being no corresponding data presently available for fluorine on silicon surface. The calculated¹⁹ f ^* nuclear quadrupole coupling constants using the electronic wave functions for SiH₃F and the larger cluster Si₄H₉F, simulating the surface, differed substantially in contrast to the situation for the Si-F distance, indicating that the quadrupole coupling is a more sensitive indicator of the adequacy of the cluster chosen to represent the surface system. Experimental results for the coupling constants are awaited for comparison with theory.     

A search for a thermal spike effect in sputtering

The temperature dependence of the sputtering yield was measured for lOOkeV per atom bombardment of silver with molecular and atomic antimony ions. No exponential increase of the yield was found in the temperature range from 25° to 775 °C, although a pronounced nonlinear effect is observed when the yield of these projectiles is compared,Y(Sb ₂ ⁺ )≈ 1.5×[2Y(Sb⁺)]. We conclude that there is no influence of the lattice temperature on collision spikes.     

Resonance-enhanced multiphoton ionization (2+1) of the\tilde B and\tilde C' states of ammonia

Resonance-enhanced multiphoton ionization (REMPI) of the \(\tilde B\) and \(\tilde C'\) states of NH₃ in a pulsed supersonic molecular beam was observed at 304–340 nm, using the multiphoton-ionization mass-spectrometer system described herein. The observed features are the result of a 2+1 MPI process and correspond quite well with the reported 3+1 MPI of NH₃ in the literature from the ground state of opposite parity.     

Dynamics of a dissipative two level system. II

The problem of quantum coherence in a symmetric double well potential with a dimensionless damping coefficient α for classical motion is studied within a spin 1/2-boson model. The experimentally measured probabilityp(t) of refinding a definite initial state after timet is approximately expressed by the transverse spin relaxation function ?(t), which is determined from a three-pole approximation, that incorporates both the correct long and short time behaviour. For a bare tunnelsplitting δ small compared to the heat bath cutoffω _c we find, that the oscillating component of ?(t) is negligible compared to the relaxational one unless α is of orderΔ/ω _c . Thusp(t)?(1+exp(?νt))/2 with a mean tunneling rateν proportional to \(\tilde \Delta = \Delta (\Delta /\omega _c )^{\frac{\alpha }{{2 - \alpha }}} \) for α < 2 andT ? \(\tilde \Delta \) and proportional toΔ ²/ω _c ·(T/ω _c ) ^α?1 otherwise. The results apply directly to recent measurements of the dynamics of flux states in a SQUID.     

Perfluormethyl-element-liganden XIII [1]: ein neuer weg zu zweikernkomplexen des typs M2(CO)8E(CF3)2X (M = Mn,Re)

The reactions of M(CO)₅X ( M = Mn, Re; X = Cl, Br, I) with E₂(CF₃)₄ (E = P, As) between 50 and 90°C yield binuclear complexes of the type M₂(CO)₈E(CF₃)₂X with two different bridging ligands, the formation of which is influenced by M (Mn > Re), E (P > As) , and X(I > Br > Cl). The main by-product is the symmetrical system M₂(CO)₈[E(CF₃)₂]₂, which is however not formed by the partial replacement of X by E(CF₃)₂ since this reaction requires temperatures above 120°C. The observed products can be explained by a three-step reaction path starting with the cleavage of E₂(CF₃)₄ followed by the subtitution of a cis-CO group in the M(CO)₅X component by M(CO)₅E(CF₃)₂ and the ring closure.     

Haloaldehyde polymers. IX. Polybromodichloroacetaldehyde

Bromodichloroacetaldehyde was synthesized by two methods. The first synthesis started from chloral, which was allowed to react with Ph₃P and the resultant compound brominated and hydrolyzed to give bromodichloroacetaldehyde in an overall yield of 60%. Purification by repeated distillation from P₂O₅ gave polymerization grade bromodichloroacetabldehyde. Bromodichloroacetaldehyde could also be synthesized by bromination of dichloroacetaldehyde diethyl acetal. The yields of this synthesis were only 20–30%, and the aldehyde could not be purified readily to give polymerization grade monomer. Bromodichloroacetaldehyde could be homopolymerized at ?30°C with anionic and also some cationic initiators to a polymer which was insoluble and did not melt but degraded to monomer above 200°C. The ceiling temperature of the polymerization was ?15°C in 1M solution. Bromodichloroacetaldehyde could also be copolymerized with isocyanates, primarily aryl isocyanates, and also with chloral.