Kettenverzweigung bei der Polymerisation von Vinylchloracetat und Vinylacetat

Zusammenfassung Bei niedrigen Umsätzen und einer Polymerisationstemperatur von 50°C erhaltene Polyvinylacetate sind unverzweigt; das gleiche gilt für Polyvinylchoracetate. Bei diesen wurde die bei höheren Umsätzen auftretende Verzweigung durch Verseifung und Acetylierung der Polymeren sowie durch Messung von []-, und Werten an den Polymeren bestimmt. Eine Selbstverzweigung der wachsenden Kette konnte nicht gefunden werden. *** DIRECT SUPPORT *** A3615144 00012

---

Chain branching in vinyl chloroacetate and vinyl acetate polymerization

Polymerization of vinyl acetate and vinyl chloroacetate to low conversions at 50°C gave unbranced polymers. The branching of polyvinyl chloroacetates at higher conversions was determined by hydrolysis and acetylation of the polymers and by measuring [], and . No self-branching of the growing chains could be found.

     

Properties of molten carboxylates part 5. A quantitative differential thermal analysis study of mesophase formation in the sytems lead(II)dodecanoate/lead(II) oxide and lead(II)dodecanoate/hendecane

Measurements have been made of the temperatures and enthalpy changes of phase transitions in the systems lead dodecanoate/lead oxide and lead dodecanoate/hendecane. The data have been discussed in terms of the R theory of amphiphylic mesophases. The concepts of the R theory are shown to be useful in the interpretation of phase transitions in molten carboxylate systems.     

Relaxation of the optical Kerr effect of anisotropic molecules in mixed liquids

The relaxation time of the Kerr effect of nitrobenzene and m-nitrotoluene in various mixtures with carbon tetrachloride and various alcohols was determined by measuring the kinetics of the Kerr effect using picosecond laser techniques. These measurements yield information on the rotational motion of molecules in liquids. The relaxation time data are interpreted in terms of an effective local viscosity effect, pair correlation, and coupling of rotational motion with shear modes.     

Kinetics of two-phase bulk polymerization. II. The influence of dissolved polymer

The effect of dissolved polybutadiene on the initial rate of polymerization of styrene was investigated by using high-precision dilatometric techniques. The dissolved polymer reduced the rate of polymerization by amounts greater than can be accounted for by a reduction in monomer concentration. Rate reductions increased with the amount of dissolved polybutadiene and with its molecular weight and were greater for benzoyl peroxide initiator than for equal concentrations of azobisisobutyronitrile. Surprisingly, analogous rate reductions were observed when polystyrene were substituted for the polybutadienes, except that at high polystyrene concentrations, the expected autoacceleration was observed. These rate reductions showed no correlation with the viscosity of the reaction mass, nor did the dissolved polymer affect initiator efficiency. At a given level of a particular dissolved polybutadiene, rate reductions were diminished by increasing levels of each initiator, and by adding a chain-transfer agent. Good quantitative agreement was obtained with the number-average length of the growing polymer chains, whether varied by using different initiators, changing initiator level, or adding chain-transfer agent. These results are inconsistent with a chemical mechanism, but they are explained by a proposal originated by North and Reed whereby the dissolved polymer makes the reaction mass a “poorer” solvent for the growing polymer chains, reducing their overall coil dimensions and enhancing their rate of diffusion together for termination.     

CNDO/2 calculations of some polyazaindenes

The theoretically estimated dipole moments of indolizine, imidazo[1,2-a]pyridine, imidazo-[1,5-a]pyridine and of pyrazolo[ 1,5-a]pyridine obtained by the CNDO/2 approximation have been compared with the experimental values. The bond angles and bond distances for these polyazaindenes have been estimated.     

Studies on the determination of diacetyl guanfubase A concentration in rabbit plasma and pharmacokinetics

A gas chromatographic method for monitoring diacetyl guanfubase A in plasma is described. The procedure involved a single solvent extraction of drug from rabbit plasma into ethyl acetate with guanfubase A as an internal standard. The extract was analyzed subsequently on a gas chromatograph equipped with a hydrogen flame ionization detector. The recovery was 86.43% +/- 6.90% (+/- SD); the RSD of within-day and between-day was 2.81%-5.26% and 5.22%-8.24%, respectively; the regression line was linear over the concentration range of 25-200 micrograms/mL, the limit of detection was 10 micrograms/mL. No endogeneous interference was found in chromatograms of the biological samples. This method was applied to the pharmacokinetic study of diacetyl guanfubase A in rabbits.     

Structure analytical methods for quantitative reference applications

The analytical methods mass spectrometry, UV/Vis, IR, Raman, Fluorometry, XRD, Mössbauer, and NMR used to elucidate chemical structure are evaluated regarding their capabilities to be used as primary analytical techniques in quantitative measurements, considering the criteria in the CCQM definition of primary methods. This includes a review of the respective measurement equations, the evaluation of the measurement uncertainty, and a discussion of evidence for the “highest metrological level”, as obtained from intercomparisons in contest with other methods. It is shown that only few methods fulfill the CCQM criteria. Quantitative NMR spectroscopy is one of them and may be considered as a potential primary method as recommended by CCQM because of being free of empirical factors in the uncertainty budget.     

Photometric flow-injection measurements with flow-cell employing light emitting diodes

Summary The flow-injection cell based on a light emitting diode and phototransistor as light source and detector respectively has been constructed and tested. As control procedures bismuth determination with Xylenol Orange and phosphate determination with molybdate and ascorbic acid were described. The working curve may be prepared as a function of absorbance or directly of photocurrent intensity.

---

Photometrische Messungen der Durchfluinjektion in einer Durchfluß-küvette mit Hilfe lichtgebender Dioden

Zusammenfassung Eine Durchfluß-Injektionsküvette in Verbindung mit einer lichtgebenden Diode und einem Phototransistor als Lichtquelle bzw. als Detektor wurden hergestellt und geprüft. Zur Prüfung wurden die Wismuthbestimmung mit Xylenolorange sowie die Phosphatbestimmung mit Molybdat und Askorbinsäure verwendet. Die Standardkurve kann als Funktion der Absorbanz oder als Funktion der Lichtstromstärke konstruiert werden.

     

Assignments for vibrational spectra of 700 benzene derivatives,volumes 1 and 2 : G. Varsanyi,Adam Hilger,London, 1974, pp. 668, price £25.00 (volumes 1 and 2 as a set)

Force constants and normal coordinates are reported for the spiropentane molecule. These data are based on the recently determined fundamental vibration frequencies of spiropentane-H₈.The results have been used to predict the fundamentals of spiropentane-D₈, to calculate the centrifugal distortion parameters, in particular the parameter r₆, which is non-zero for molecules with a four-fold axis of rotation and to calculate thermodynamic parameters. Good agreement is observed between the calorimetric vapour heat capacity of spiropentane and the value based on our assignments for the fundamental vibrations of spiropentane.The transferability of the cyclopropane force field has been tested and shown to be valid for predicting the deformations of the methylene groups of spiropentane.