Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Evaluation of indoor exposition to benzene, toluene, ethylbenzene, xylene, and styrene by passive sampling with a solid-phase microextraction device

A solid-phase microextraction (SPME) sampling method is developed to evaluate indoor exposure to benzene, toluene, ethylbenzene, xylene, and styrene with gas chromatography and flame ionization detection for quantitative analysis. An SPME holder with a 100-pm polydimethylsiloxane (PDMS) and 65-pm PDMS-divinylbenzene fiber coating is tested in different air relative humidity conditions. The method gives good resolution, shows a linear response, is repeatable, and presents high sensitivity. This method is compared with National Institute of Occupational Safety and Health (NIOSH) active sampling.     

ViscosityB-coefficients for lithium perchlorate in ethylene glycol-water mixtures

Viscosities and densities of lithium perchlorate solutions in different ethylene glycol-water compositions have been measured at 25.0 and 35.0 °C. From these data, the correspondingB-coefficients of theJones-Dole equation have been determined. TheB-value depends on the solvent composition and it reaches a maximum in the water-rich region. This behaviour is analysed in terms of ionic solvation and solvent structure.

---

Viskositäts-B-Koeffizienten für Lösungen von Lithiumperchlorat in Ethylenglykol-Wasser-Mischungen

Zusammenfassung Es wurden die Dichten und Viskositäten für Lösungen von Lithiumperchlorat in verschieden zusammengesetzten Ethylenglykol-Wasser-Mischungen bei 25 °C und 35 °C gemessen. Auf Grund der erhaltenen Daten wurden dieB-Koeffizienten in den entsprechendenJones-Dole-Gleichungen für die relative Viskosität bestimmt. DieB-Werte hängen von der Zusammensetzung des Lösungsmittels ab und erreichen im wasserreichen Konzentrationsgebiet ein Maximum. Dieses Verhalten wird in Hinblick auf die Ionensolvatation und die Struktur des Lösungsmittels analysiert.

     

Extraction separation of Cs+, Sr2+ and Ba2+ from a mixture of cations forming stable non-extractable complexes with ethylenediamine-N,N, N′,N′-tetraacetic acid in the water-nitrobenzene system

In the two-hase water-nitrobenzene extraction system, a method for gradual separation of Cs⁺, Sr²⁺ and Ba²⁺ from the mixture of cations forming stable non-extractable complexes with ethylenediamine-N, N, N,N-tetraacetic acid in the presence of the sodium salt of dicarbollylcobaltate anion {[-(3)-1, 2-B₉C₂H₁₁]₂ Co(III)}^– and polyethylene glycol ligand with a mean relative molecular mass of 400 (PEG 400), respectively, was developed. In the first extraction step, Cs⁺ was extracted into the organic phase while the other cations studied (Ca²⁺, Sr²⁺, Ba²⁺, Zn²⁺, Co²⁺, Ce³⁺) remained in the aqueous phase. In the second extraction step, Sr²⁺ and Ba²⁺ were extracted into the nitrobenzene phase. Finally, in the following reextraction step, Sr²⁺ was transferred into the aqueous phase while Ba²⁺ remained in the organic phase.     

Testing the photocatalytic activity of cyanogen-and thiocyanogen-based inorganic polymers

The photocatalytic properties of some cyanogen-and thiocyanogen-based inorganic polymers, such as paracyanogens containing different metals (Hg, Ag, Cu), polythiocyanogens of different iodine contents, polycyanogen and poly (cyanogenthiocyanate), have been tested in two systems. Cu-containing paracyanogen and the iodine-poor polythiocyanogens catalyze the photoreduction of methylviologen under visible light, furthermore the Cu-containing paracyanogen catalyzes the photoreduction of water to hydrogen under UV irradiation.

---

, , , , (Hg, Ag, Cu), , (), . , , , , , , -.

     

Prompt-gamma activation analysis using thek 0 approach

Applying thek ₀ standardization method to prompt-gamma activation analysis (PGAA) offers similar benefits as in instrumental neutron activation analysis. It has been demonstrated that under constant flux conditionsk ₀-factors obtained by normalizing to a titanium comparator, measured separately, yield consistent analytical sensitivity ratios. The ratio method has been generalized by using stoichiometric compounds for the determination ofk ₀-factors. Since chlorine forms compounds with essentially everyelement and it also serves as a detector efficiency standard,k ₀ values have been determined relative to chlorine as an internal standard for several analytically important elements in two reactor facilities: the thermal guided beam at the BRR in Budapest and the cold-neutron beams at the NBSR at NIST.     

Conductivities and silver electrode polarization resistance of solid electrolyte ceramics from ZrO2-Y2O3 powder synthesized in air plasma

Ceramic specimens have been obtained from the powder of ZrO₂-7.5 mol% Y₂O₃ having a specific surface area of 30 m²/g synthesized in air plasma. The novelty of this research lies in the fact that the plasma process makes it possible to prepare so-called nanopowders with a particle size less than 100 nm, possessing specific physical, chemical and technological properties. The sintered density of the specimens was 94–96% of the theoretical value, 6.001 g/cm³. The X-ray diffraction pattern of the specimens corresponded to a face-centered cubic lattice. Impedance in the frequency range of 100 Hz–15 MHz and d.c. polarization curves in a potential range of −10 to 10 mV were measured in the temperature range 200–850 °C in heating and cooling cycles. The intragrain, the grain boundary and the total bulk conductivities, the electrode polarization resistance and their activation energies were determined. The thermal stability of the studied system was proved in three measurement series up to 600–850 °C in heating and cooling cycles. The results obtained have shown that the conductivity of ZrO₂-7.5 mol% Y₂O₃ ceramics is not solely a function of temperature, but also depends on the previous thermal state of the ceramics. Received: 16 October 1997 / Accepted: 19 January 1998     

Phosphaniminato-Komplexe des Iods. Synthese und Kristallstrukturen von Ph3PNIO2 und Ph3PNSiMe3 · I2

Phosphoraneiminato Complexes of Iodine. Syntheses and Crystal Structures of Ph₃PNIO₂ and Ph₃PNSiMe₃ · I₂ Ph₃PNIO₂ has been prepared as yellow crystals by the reaction of Ph₃PNSiMe₃ with I₂O₅ in boiling acetonitrile, whereas the molecular complex Ph₃PNSiMe₃ · I₂ is formed as brown crystals by the reaction of Ph₃PNSiMe₃ with iodine in acetonitrile solution. Both complexes were characterized by crystal structure determinations. Ph₃PNIO₂: Space group P2₁/n, Z = 4, 2 858 observed unique reflections, R = 0.039. Lattice dimensions at 19°C: a = 972.8(2), b = 1 743.4(3), c = 1 073.7(2) pm, β = 115.46(3)°. The compound forms monomeric molecules with pyramidal geometry at the iodine atom. The bond angle PNI (126.9°) is unusually small; the PN bond length of 159.2 pm corresponds with a double bond. Ph₃PNSiMe₃ · I₂: Space group P1 , Z = 2, 3 560 observed unique reflections, R = 0.033. Lattice dimensions at 19°C: a = 941.2(2), b = 1 041.7(2), c = 1 287.4(3) pm, α = 78.34(1)°, β = 72.00(2)°, γ = 86.08(2)°. The compound forms monomeric molecules, in which the I₂ molecule and the nitrogen atom of the phosphoraneimine molecule realize a linear N? I? I axis with a bond length N? I of 243.2 pm.     

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Comparison of fingerprint-based methods for virtual screening using multiple bioactive reference structures

Fingerprint-based similarity searching is widely used for virtual screening when only a single bioactive reference structure is available. This paper reviews three distinct ways of carrying out such searches when multiple bioactive reference structures are available: merging the individual fingerprints into a single combined fingerprint; applying data fusion to the similarity rankings resulting from individual similarity searches; and approximations to substructural analysis. Extended searches on the MDL Drug Data Report database suggest that fusing similarity scores is the most effective general approach, with the best individual results coming from the binary kernel discrimination technique.