Beiträge zur Chemie des Schwefels. 108. Schmelzwärme und spezifische Wärme des flüssigen Schwefels. Einfluß von Verunreinigungen

Using an adiabatic calorimeter, the heat of transition S_α ? S_β, the heat of fusion of S_β and the specific heat of the liquid had been determined on sulfur samples refined by zone melting and samples doped with chlorine, bromine and iodine. The data obtained from pure sulfur (heat of fusion: 1608 ± 8 J/Tom, specific heat of the liquid at 120°C: 29,4 J/Tom.°C) are about 10% lower than comparable values of other authors. Apparently they represent heat of fusion and specific heat of the pure cyclooctasulfur. The measurements on doped samples (δH_S = 1736 ± 10 J/Tom) are in agreement with the data reported in literature and include a portion of enthalpy from the transition reaction of cycloocta-sulfur (S_λ) to catenaocta-sulfur (S_π), requiring extremly long equilibrium times in pure sulfur. The influence of impurity on the caloric properties of the liquid sulfur is also indicated by the increasing width and decreasing highness of the C_p-maximum at 159°C with increasing amount of halogens. For the heat of transition S_α → S_β, independent of the amount of impurity, the literature data could be confirmed. At the samples doped with iodine there was observed a previously unreported transition near 65,9°C.     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

SEDIMENTATION ANALYSIS OF DNA PHOTOOXIDIZED IN THE PRESENCE OF THIOPYRONINE

Abstract. Illumination of single-stranded φ×174 phage DNA with visible lightλ > 500 nm) in the presence of the sensitizer thiopyronine results in both chain scissions detectable by velocity sedimentation in neutral medium and in alkali-labile bonds which yield secondary strand breaks after alkaline treatment. Compared with the generation of primary strand breaks, the formation of alkali-labile sites seems to be the predominant reaction.
Photodynamic treatment of homogeneous double-stranded Ta, phage DNA leads to changes in the overall conformation of DNA as revealed by an initial increase of the sedimentation coefficient. The simultaneous occurrence of different effects (decrease of molecular weight, increase of effective DNA flexibility) is particularly evident from changes in the sedimentation coefficient distribution. The fact that both processes influence the sedimentation behaviour questions the common procedure of calculating double-strand break numbers from sedimentation coefficient distributions on the basis of s#-M relations which are valid for intact DNA only.
Photooxidized double-stranded DNA exhibits an increased sensitivity against shear forces.     

Xanthate complexes of nickel with nitrogen donor ligands. Part V

Nickel(II) xanthate complexes of general formula, [Ni(Rxa)₂(L)] [R = i-Pr, i-Am, xa = OCS^– ₂, L = 4,7-diphenyl-1,10-phenanthroline(baphen), 4,4-dimethyl-2,2-bipyridyl (me₂bpy), 2-9-dimethyl-1,10-phenanthroline(neo) or trans-1,2-diaminocyclohexane (dch)] and [Ni(Rxa)(cyclam)](Rxa) (= 1,4,8,11-tetraazacyclotetradecane) have been synthesized and characterized by elemental analyses, i.r. and electronic spectroscopy, magnetic and conductivity measurements. The complexes with cyclam were studied by cyclic voltammetry. Values of magnetic moments at room temperature lie within the 3.25–3.51 B.M. range and thus indicate the presence of two unpaired electrons, except for the complexes with cyclam, where the anomalous values of 1.76 and 1.74 B.M. were obtained in respect to the nickel(II) complexes. Magnetic susceptibility data for [Ni(i-Prxa)(cyclam)](i-Prxa) were measured over the 79–298 K range and indicate no exchange interaction between paramagnetic nickel(II) centres.     

Holo- and hemidirected lead(II) in the polymeric [Pb(4)(mu-3,4-TDTA)2(H2O)2]*4H2O complex. N,N,N',N'-tetraacetate ligands derived from o-phenylenediamines as sequestering agents for lead(II)

The coordinating ability of the ligands 3,4-toluenediamine-N,N,N',N'-tetraacetate (3,4-TDTA), o-phenylenediamine-N,N,N',N'-tetraacetate (o-PhDTA), and 4-chloro-1,2-phenylenediamine-N,N,N',N'-tetraacetate (4-Cl-o-PhDTA) (H4L acids) toward lead(II) is studied by potentiometry (25 degrees C, I = 0.5 mol x dm(-3) in NaClO4), UV-vis spectrophotometry, and 207Pb NMR spectrometry. The stability constants of the complex species formed were determined. X-ray diffraction structural analysis of the complex [Pb4(mu-3,4-TDTA)4(H2O)2]*4H2O (1) revealed that 1 has a 2-D structure. The layers are built up by the polymerization of centrosymmetric [Pb4L2(H2O)2] tetranuclear units. The neutral layers have the aromatic rings of the ligands pointing to the periphery, whereas the metallic ions are located in the central part of the layers. In compound 1, two types of six-coordinate lead(II) environments are produced. The Pb(1) is coordinated to two nitrogen atoms and four carboxylate oxygens from the ligand, whereas Pb(2) has an O6 trigonally distorted octahedral surrounding. The lead(II) ion is surrounded by five carboxylate oxygens and a water molecule. The carboxylate oxygens belong to four different ligands that are also joined to four other Pb(1) ions. The selective uptake of lead(II) was analyzed by means of chemical speciation diagrams as well as the so-called conditional or effective formation constants K(Pb)eff. The results indicate that, in competition with other ligands that are strong complexing agents for lead(II), our ligands are better sequestering agents in acidic media.     

A highly reactive mononuclear Zn(II) complex for phosphodiester cleavage

The activity of a Zn(II) complex of a tetradentate, tripodal ligand for catalyzing phosphodiester cleavage is enhanced 750-fold by introducing three hydrogen bond donors to the ligand. Inhibition studies show that the Zn-aqua complex is the kinetically active form and that it binds the transition state with a formal dissociation constant of 3 x 108 M-1. The effect of these ligand modifications on the transition-state affinity is comparable to the rate acceleration provided by the metal ion itself. Overall, this mononuclear complex is more active than the most reactive dinuclear Zn(II) complexes reported to date.     

Ligand adsorption on an activated carbon for the removal of chromate ions from aqueous solutions

The results presented in this work are related to the design of a guideline to develop specific properties at the surface of an activated carbon (AC). For this, two model aromatic compounds have been synthesized and their electrolytic behavior in aqueous solutions was studied by a potentiometric method. The textural characteristics of the activated carbon were determined by porosimetry methods. The nature of oxygen-carrying functions and the acid-base behavior of the AC surface were characterized by TPD and potentiometric titration methods, respectively. The adsorption and desorption equilibria of the aromatic compounds on activated carbon were measured in aqueous solutions, and the hysteresis between adsorption and desorption, which reveals irreversible adsorption, was discussed on the basis of the frontier orbital theory. HOMO and LUMO orbitals of the adsorbent and adsorbates were calculated, and irreversible adsorption was attributed to the small energy difference between HOMO and LUMO of the aromatic adsorbates and the adsorbent. Adsorption equilibria of K2CrO4 in aqueous solution on the AC alone and on the AC-aromatic ligand adsorbents, respectively, prove the efficient development of specific chemical functions at the carbon surface provided by the adsorbed aromatic compounds.     

Determination of ethyl biscoumacetate and its metabolite 7-hydroxyethyl biscoumacetate in human serum by high-performance liquid chromatography and mass spectrometry.

An efficient reversed-phase high-performance liquid chromatographic method has been developed for the determination of ethyl biscoumacetate (EBA) and its metabolite in human serum, using the mu Bondapak C18 column and methanol-water-phosphoric acid (56:46.8:0.2, v/v/v) as the mobile phase. This method permitted the determination of both EBA and a metabolite in human serum. The latter has been mentioned by other authors only in urine samples, where significant concentrations were found. Identification of the metabolite as 7-hydroxyethyl biscoumacetate was based on its chromatographic separation, followed by isolation from the eluate and direct mass spectrometric identification. It has been found that the higher EBA concentrations in human serum described by Brodie et al. [J. Pharmacol. Exp. Ther., 106 (1952) 453] were caused by the insufficient resolving power of the spectrophotometric method used, leading to overlapping of the UV spectra of the parent drug and its metabolite.     

Synthesis and characterization of trifluoromethyl fluoroformyl peroxycarbonate,CF3OC(O)OOC(O)F

The synthesis of CF(3)OC(O)OOC(O)F is accomplished by the photolysis of a mixture of (CF(3)CO)(2)O, FC(O)C(O)F, CO, and O(2) at -15 degrees C using a low-pressure mercury lamp. The new peroxide is obtained in pure form in low yield after repeated trap-to-trap condensation and is characterized by NMR, IR, Raman, and UV spectroscopy. Geometrical parameters were studied by ab initio methods [B3LYP/6-311+G(d)]. At room temperature, CF(3)OC(O)OOC(O)F is stable for many days in the liquid or gaseous state. The melting point is -87 degrees C, and the boiling point is extrapolated to 45 degrees C from the vapor pressure curve log p = 8.384 - 1715/T (p/mbar, T/K). A possible mechanism for the formation of CF(3)OC(O)OOC(O)F is discussed, and its properties are compared with those of related compounds.