A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

Crystal,molecular and electronic structure of 1,1-diaryl-2-halogenoethylenes

On the basis of semiempirical calculations, the conformation of the isolated molecule of 2-bromo-1,1-diphenylprop-1-ene corresponding to the minimum of total energy was determined. Assuming some information on the localization of the molecules in the crystal, also the conformation in a theoretical crystal was studied. The results have been compared with the crystal structure of 2-bromo-1,1-diphenylprop-1-ene, as obtained by X-ray diffraction. From the comparison a slight displacement of the C2 atom was suggested.

---

Zusammenfassung Die dem Minimum der Gesamtenergie entsprechende Konformation des isolierten Moleküls von 2-Brom-1,1-diphenylprop-1-en wurde durch halb-empirische Methoden bestimmt. Gewisse Ergebnisse über die Anordnung der Moleküle im Kristall machten es möglich, die Konformation in einem theoretischen Kristall zu untersuchen. Nach Vergleich der Resultate mit der durch Röntgen-Analyse bestimmten Kristallstruktur des 2-Brom-1,1-diphenylprop-1-en wurde eine kleine Verschiebung des C2-Atoms vorgeschlagen.

---

Résumé Par le moyen de calculs semiempiriques on a déterminé la conformation de la molécule isolée de 2-bromo-1, 1-diphénilprop-1-ène, correspondant au minimum d'énergie totale. On a aussi étudié la conformation dans le cristal théorique en se basant sur des informations concernant la localisation des molécules dans le cristal. On a comparé ces résultats avec ceux que nous avons obtenus par la détermination de la structure cristalline du 2-bromo-1, 1-diphénilprop-1-ène avec la diffraction des rayons X: cette comparaison nous a porté à déplacer un petit peu l'atome C 2.

---

---

This work was supported by a grant from the Italian Consiglio Nazionale delle Ricerche.     

Diffeomorphism-invariant properties for quasi-linear elliptic operators

For quasi-linear elliptic equations we detect relevant properties which remain invariant under the action of a suitable class of diffeomorphisms. This yields a connection between existence theories for equations with degenerate and nondegenerate coerciveness.     

Ionic electroactive polymer metal composites: Fabricating,modeling, and applications of postsilicon smart devices

Smart systems adapt to the surrounding environments in a number of ways. They are capable to scavenge energy from available sources, sense and elaborate external stimuli and adequately react. Electro Active Polymers are playing a main role in the realization of smart systems for applications if fields such as bio inspired and autonomous robotics, medicine, and aerospace. This paper focus on the possibility to use Ionic Polymer Metal Composites as a class of materials relevant to the realization of post silicon smart systems. The three main aspects of this new technology, i.e., fabrication methods, modeling, and applications are described with emphasis to most recent results. Attention is given to main challenges and shortcomings to be solved for technology, modelling, and control of IPMC based devices that need to be solved before this new technology can be fully exploited in real world applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Effect of limonene on the frontal ring opening metathesis polymerization of dicyclopentadiene

The frontal ring opening metathesis polymerization (FROMP) of dicyclopentadiene (DCPD) in the presence of limonene, using second generation Grubbs’ catalysts, is reported. The effect of limonene on the amount of catalyst and the typical frontal polymerization parameters, as maximum temperature (T_max) and velocity of the front (V_f), is studied. In addition, the influence of limonene on the mechanical properties of the polymeric samples is reported. Finally, a deep study on the swelling properties of polymers is done. It has been demonstrated that limonene acts as both inhibitor and solvent of the catalyst. The T_max, V_f, T_g, and Young modulus values decrease as the amount of limonene increases, and the polymer samples swell in THF depending on the amount of limonene. All results indicate that the limonene addition on FROMP of results in advantages on the polymerization reaction and its parameters and on the final polymer properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 63–68     

Synthesis of aggregation pheromone components of cerambycid species through α-hydroxylation of alkylketones

The synthesis of 3-hydroxy-2-hexanone and 2,3-hexanediol, two components of the aggregation pheromone of several cerambycid species, is disclosed in here. Starting from 2-hexanone, through an α-hydroxylation using (diacetoxyiodo)benzene, 3-hydroxy-2-hexanone is obtained in good yield. Further reduction of this compound, gives 2,3-hexanediol in excellent yield. A study of the α-hydroxylation reaction of several alkylketones using an hypervalent iodine reagent is also disclosed in here. The synthesis of optically active compounds (R)- and (S)-3-hydroxy-2-hexanone was achieved starting from 2-hexanone with nitrosobenzene and l- and d-proline respectively, in several reaction media.     

Single nucleotide polymorphism detection by optical DNA-based sensing coupled with whole genomic amplification

The work presented here deals with the optimization of a strategy for detection of single nucleotide polymorphisms based on surface plasmon resonance imaging. First, a sandwich-like assay was designed, and oligonucleotide sequences were computationally selected in order to study optimized conditions for the detection of the rs1045642 single nucleotide polymorphism in the gene ABCB1. Then the strategy was optimized on a surface plasmon resonance imaging biosensor using synthetic DNA sequences in order to evaluate the best conditions for the detection of a single mismatching base. Finally, the assay was tested on DNA extracted from human blood which was subsequently amplified using a whole genome amplification kit. The direct detection of the polymorphism was successfully achieved. The biochip was highly regenerable and reusable for up to 20 measurements. Furthermore, coupling these promising results with the multiarray assay, we can foresee applying this biosensor in clinical research extended to concurrent analysis of different polymorphisms.