A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

Electronic and Steric Influence of Axial and Equatorial Ligands in Vitamin B12 Model Complexes Derived from Cobaloxime: Electrochemical and 59Co-NMR Studies

In four series of strictly related organocobalt complexes, derived from cobaloximes by replacement of the O…H…O with O…-BF₂…O and/or (CH₂)₃ groups, the trends of ⁵⁹Co-NMR shielding and electrochemical data are discussed. A largely parallel behaviour of the plots of E_1/2(I) values for the first Co(III)/Co(II) electron transfer vs. the ₅₉Co chemical shifts reflects the similar sensitivity of the two parameters to a change in electron affinity of the central metal ion due to a variation of the organic group R. E_1/2(II) values for the second Co(II)/CO(I) electron transfer are less sensitive to the change of R, but the trend of the plot vs. δ(₅₉Co) is still parallel in the four series. Consistent deviations from a roughly linear dependence of E_1/2(I) on pK_a of the hydrocarbon acid corresponding to R, on Taft constant s?_* and on ⁵⁹Co shielding are noticed for the isopropyl derivatives and attributed to a steric effect. This was confirmed in a series of R? Co(DMG)pyridine complexes in which ⁵⁹Co shielding decreases steadily with increasing steric parameter E_s (Taft) of the alkyl group. There is experimental evidence from X-ray data that δ(⁵⁹Co) decreases with an increase of the Co? C bond length, illustrating steric hindrance in alkyl coordination to be responsible for the decreased shielding of the ⁵⁹Co nucleus. The relative displacements of the graphic displays for the different series reflect the effect of changes in electron affinity of the redox center, due to the equatorial ligand, which, in turn, is caused by variations in the electron-withdrawing power due to the introduction of the BF₂ group and by the change from ?2 to ?1 valence of the (CH₂)₃-capped ligands.     

Electron impact mass spectrometric investigation of pyrrole mono-, di- and tri-carboxylic acids

The electron impact-induced fragmentation processes of pyrrole-2-, -3-, -2,3-, -3,4-, -2,5- and -2,3,4-carboxylic acids were investigated with the aid of metastable ion, collisional and deuterium labelling experiments. The general behaviour of these compounds is discussed in detail, together with the reasonable structures of the more relevant fragment ions.     

Thermal and FTIR spectroscopic analysis of the interactions of aniline adsorbed on to MCM-41 mesoporous material

The adsorption of aniline on Na-AlMCM-41 synthesized by us has been characterized by infrared spectroscopy, temperature programmed desorption (TPD), and differential thermal analysis methods. Aniline would be mostly bound to the mesostructure through weak pi interactions. On the mesostructure containing adsorbed water, the co-adsorption of aniline could occur by weak hydrogen bonding through surface water molecules. For water, two possible modes of adsorption have been identified. Different associations between aniline and hydrated and nonhydrated mesostructures have been evaluated in order to favor the posterior in situ polymerization of adsorbed aniline.     

A kinetic approach to homogeneous Ziegler type polymerization. Steady state

In this paper we present a kinetic approach to the analysis of steady-state homogeneous Ziegler-Natta polymerization activity data. The influence of the number of monomeric species that are coordinated to the active site on the apparent rate law is discussed and the equations are fitted to the experimental results.     

IR and theoretical studies of monocarbonyl Ni complexes formed by adsorption of CO at low pressure on silica-supported Ni(II) ions

This work reports on the reactivity of coordination vacancies of Ni(II) ions grafted onto the tridentate silica support (Ni(II)(3c) ions) with respect to CO used as a probe molecule. The adsorption of CO at 77 K in the 0.3 to 3.5 Pa CO pressure range is studied by FTIR on two samples differing in the dispersion of nickel. Quantum chemical calculations by the DFT method are performed to investigate, using a cluster approach, the binding of Ni to silica and, after CO adsorption, the geometry of the resulting carbonyl Ni complexes. Silica is modeled by using clusters composed of three types of monodentate ligands, SiO(-), SiOSi and/or SiOH, found on the surface of silica. This work is devoted to the monocarbonyl complexes. Whatever the sample, only one type of monocarbonyl is formed from Ni(II)(3c) ions. It is shown that the charge of the silica cluster is the major parameter influencing the CO IR frequency whereas the nature and the size of the silica cluster do not affect the CO bond length, confirming that local electrostatic interactions predominate. Only the 1- charged silica cluster Si(5)O(3)(-), composed of SiO(-), 2SiOSi fragments, respectively, reproduces the Ni[bond]O distances derived from EXAFS for the Ni(II)(3c) grafted site and gives CO frequencies in good agreement with the experimental values. It is shown that CO is stabilized by a magnetic transition from the (3)Ni(2+) triplet to the (1)Ni(2+) singlet state occurring upon adsorption.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM

Tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM) undergoes homopolymerization on heating. Intramolecular reactions which compete with crosslinking favor the formation of cyclic structures with increasing thermal and fire resistance of the resin, whereas physical mechanical properties tend to decrease. The mechanism of thermal decomposition of TGDDM is studied by thermogravimetry, differential scanning calorimetry and thermal volatilization analysis with characterization of volatiles evolved and residue left. Thermal degradation of poly-(TGDDM) starts at 260°C with elimination of water from secondary alcoholic groups which is a typical pathway for epoxy resin degradation. Resulting unsaturations weaken bonds in the β-position and provoke the first chain breaking at allyl–amine and allyl–either bonds. With increasing temperature, saturated alkyl–ether bonds and alkyl carbon–carbon bonds are broken first, followed by the most stable alkyl–aryl bonds at T>365°C. The combustion performance of TGDDM is discussed on the basis of the thermal degradation behavior.     

Micellar catalysis of the reaction of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ions

The reactions of 2,4-dinitrofluorobenzene with phenoxide and thiophenoxide ion in water are strongly catalyzed by micelles of cetyltrimethylammonium bromide (CTABr) by factors of 230 and 1100 respectively. Nonionic micelles of Brij weakly catalyze the reaction with thiophenoxide ion. Spectral measurements show that phenoxide, and especially thiophenoxide, ions interact strongly with micelles of CTABr which also markedly change the acid dissociation of phenol under given buffer conditions.