Thickness induced structural changes in polystyrene films

Changes to the structure of polystyrene melt films as measured through the spectrum of density fluctuations have been observed as a function of film thickness down to the polymer radius of gyration (Rg). Films thicker than 4Rg show bulklike density fluctuations. Thinner films exhibit a peak in S(q) near q=0 which grows with decreasing thickness. This peak is attributed to a decreased interpenetration of chains resulting in an enhanced compressibility. Measurements were made using small angle x-ray scattering in a standing wave geometry designed to enhance scattering from the interior of the film compared to interface scattering.     

Detecting lateral interfaces with focus‐engineered coherent anti‐Stokes Raman scattering microscopy

Focus‐engineered coherent anti‐Stokes Raman scattering (FE‐CARS) microscopy is used to highlight the lateral interfaces between chemically distinct media. Interface highlighting is achieved by using a HG10 mode for the Stokes laser beam and a HG00 mode for the pump laser beam in the forward detection scheme. The spectral and the orientation dependence of FE‐CARS are found to be in agreement with theoretical predictions. A brief discussion on the relevance of this technique for imaging third‐order nonlinear susceptibility interfaces in thin samples of biological or chemical importance is presented. Copyright © 2008 John Wiley & Sons, Ltd.     

Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

Estimation of optimal parameters yielding target amplitude–frequency response in nonlinear vibrating systems by a generalised cluster-based algorithm

Nonlinear Dynamics - Optimisation procedures for nonlinear vibrating systems are made cumbersome due to the fact that the regimes of periodic response are not known beforehand. Moreover, such...     

Analytical and numerical solution of an $$\varvec{n}$$n-term fractional nonlinear dynamic oscillator

Nonlinear Dynamics - This work presents a novel method for the analytical and numerical solution of an n-term fractional nonlinear dynamical system. Two simple methods, commonly known to vibration...     

N,N′-Ethylene-Bridged Bis-2-Aryl-Pyrrolinium Cations to E-Diaminoalkenes: Non-Identical Stepwise Reversible Double-Redox Coupled Bond Activation Reactions

This work presents a stepwise reversible two-electron transfer induced hydrogen shift leading to the conversion of a bis-pyrrolinium cation to an E-diaminoalkene and vice versa. Remarkably, the forward and the reverse reaction, which are both reversible, follow two completely different reaction pathways. Establishing such unprecedented property in this type of processes was possible by developing a novel synthetic route towards the starting dication. All intermediates involved in both the forward and the backward reactions were comprehensively characterized by a combination of spectroscopic, crystallographic, electrochemical, spectroelectrochemical, and theoretical methods. The presented synthetic route opens up new possibilities for the generation of multi-pyrrolinium cation scaffold-based organic redox systems, which constitute decidedly sought-after molecules in contemporary chemistry.     

Lewis acid metal ion-exchanged MAPO-36 molecular sieve: Characterisation and catalytic activity

Magnesium aluminophosphate-36 (MAPO-36) molecular sieve was synthesised hydrothermally and subjected to wet ion-exchange with Fe³⁺, Zn²⁺, La³⁺ or Ce³⁺. They were characterised by using XRD, SEM, temperature programmed desorption (TPD) of ammonia and thermogravimetric analysis (TGA). The XRD patterns of ion-exchanged MAPO-36 exhibit similar features to that of MAPO-36, which revealed no structural degradation during ion-exchange. TPD (ammonia) showed selective ion-exchange of strong acid sites for Fe³⁺, La³⁺ and Ce³⁺ but not for Zn²⁺. Based on the results of TGA the actual species involved in the ion-exchange is suggested to be M(OH)₂⁺, which upon calcination converted to MO⁺ where M is Fe³⁺, La³⁺ or Ce³⁺. tert-Butylation of phenol was carried out in the vapour phase as a probe reaction to examine the catalytic activity of MAPO-36 and ion-exchanged MAPO-36 molecular sieves. The ion-exchanged catalysts were found to be more active than the parent MAPO-36 and also showed higher selectivity to 4-tert-butylphenol.     

Ionic liquid [Hmim]HSO4-promoted one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts

The first example of the one-pot oxidative conjugate addition of sulfur-centred nucleophiles to Baylis-Hillman adducts is reported. The reaction involves oxidation of Baylis-Hillman adducts with NaNO₃ in the Brønsted acidic ionic liquid [Hmim]HSO₄ to give [E]-α-cyanocinnamaldehydes followed by conjugate hydrothiocyanation/hydrosulfenylation with NH₄SCN/PhSH to afford the corresponding β-thiocyanato (or β-phenylsulfenyl)-α-cyanohydrocinnamaldehydes diastereoselectively in 76-89% yields in a one-pot procedure. After isolation of the product, the ionic liquid [Hmim]HSO₄ could be easily recycled for further use.