Role and effective treatment of dispersive forces in materials: Polyethylene and graphite crystals as test cases

A semiempirical addition of dispersive forces to conventional density functionals (DFT-D) has been implemented into a pseudopotential plane-wave code. Test calculations on the benzene dimer reproduced the results obtained by using localized basis set, provided that the latter are corrected for the basis set superposition error. By applying the DFT-D/plane-wave approach a substantial agreement with experiments is found for the structure and energetics of polyethylene and graphite, two typical solids that are badly described by standard local and semilocal density functionals.     

Single Drop Dynamics under Shearing Flow in Systems with a Viscoelastic Phase

In this article, we discuss the dynamics of a single drop immersed in an immiscible liquid, under an imposed shear flow. The two situations of a viscoelastic matrix with a Newtonian drop and of a viscoelastic drop in a Newtonian matrix are considered, both systems being characterized by a viscosity ratio equal to one, and by the same elasticity parameter. Experimental data are taken with a rheo-optical computer-assisted shearing device, allowing for drop observation from the vorticity direction of the shear flow. Data favourably compare with predictions of the recently proposed Maffettone-Greco model, where the drop is described as a deforming ellipsoid.     

Reversed-phase capillary electrochromatography for the simultaneous determination of acetylsalicylic acid, paracetamol, and caffeine in analgesic tablets

The separation and simultaneous determination of caffeine, paracetamol, and acetylsalicylic acid in two analgesic tablet formulations was investigated by capillary electrochromatography (CEC). The effect of mobile phase composition on the separation and peak efficiency of the three analytes was studied and evaluated; in particular, the influence of buffer type, buffer pH, and acetonitrile content of the mobile phase was investigated. The analyses were carried out under optimized separation conditions, using a full-packed silica capillary (75 microm ID; 30.0 cm and 21.5 cm total and effective lengths, respectively) with a 5 microm C8 stationary phase. A mixture of 25 mM ammonium formate at pH 3.0 and acetonitrile (30:70 v/v) was used as the mobile phase. UV detection was at 210 nm. Good linearity was found in the range of 50-200, 20-160, and 4-20 microg/mL for acetylsalicylic acid (r2=0.9988), paracetamol (r2=0.9990) and caffeine (r2=0.9990), respectively. Intermediate precision (RSD interday) as low as 0.1-0.8% was found for retention times, while the RSD values for the peak area ratios (Aanalyte/AIS) were in the range of 1.9-2.9%. The optimized CEC method was applied to the analysis of the studied compounds present in commercial tablets.     

Multifunctional polyurethane foams with thermal energy storage/release capability

Journal of Thermal Analysis and Calorimetry - In this work, polyurethane (PU) insulating panels containing different amounts of a microencapsulated paraffin with a nominal melting temperature of...     

New Promising Therapeutic Avenues of Curcumin in Brain Diseases

Curcumin, the dietary polyphenol isolated from Curcuma longa (turmeric), is commonly used as an herb and spice worldwide. Because of its bio-pharmacological effects curcumin is also called “spice of life”, in fact it is recognized that curcumin possesses important proprieties such as anti-oxidant, anti-inflammatory, anti-microbial, antiproliferative, anti-tumoral, and anti-aging. Neurodegenerative diseases such as Alzheimer’s Diseases, Parkinson’s Diseases, and Multiple Sclerosis are a group of diseases characterized by a progressive loss of brain structure and function due to neuronal death; at present there is no effective treatment to cure these diseases. The protective effect of curcumin against some neurodegenerative diseases has been proven by in vivo and in vitro studies. The current review highlights the latest findings on the neuroprotective effects of curcumin, its bioavailability, its mechanism of action and its possible application for the prevention or treatment of neurodegenerative disorders.     

Artificial Water Channels: Towards Biomimetic Membranes for Desalination

Natural Aquaporin (AQP) channels are efficient water translocating proteins, rejecting ions. Inspired by this masterpiece of nature, Artificial Water Channels (AWCs) with controlled functional structures, can be potentially used to mimic the AQPs to a certain extent, offering flexible avenues toward biomimetic membranes for water purification. The objective of this paper is to trace the historical development and significant advancements of current reported AWCs. Meanwhile, we attempt to reveal important structural insights and supramolecular self-assembly principles governing the selective water transport mechanisms, toward innovative AWC-based biomimetic membranes for desalination.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Impact of Matrix Metalloproteinase-9 during Periodontitis and Cardiovascular Diseases

Matrix metalloproteinase-9 (MMP-9) has been shown to play a key role in endothelial function and perhaps pivotal in the correlation between periodontal disease and cardiovascular disease (CVD). For the study, the impact of MMP-9 of periodontitis and CVD on serum and saliva concentrations was analyzed. For the study patients with periodontitis (n = 31), CVD (n = 31), periodontitis + CVD (n = 31), and healthy patients (n = 31) were enrolled. Clinical and demographic characteristics as well as serum and salivary MMP-9 were evaluated. MMP-9 concentrations in serum and saliva were statistically elevated in patients with CVD (p < 0.01) and in patients with periodontitis plus CVD (p < 0.001) compared to patients with periodontitis and healthy subjects. Multivariate regression analysis showed that c-reactive protein (hs-CRP) was the only significant predictor for MMP-9 serum (p < 0.001), whereas hs-CRP (p < 0.001) and total cholesterol (p = 0.029) were the statistically significant salivary MMP-9 predictors. This study evidenced that patients with CVD and periodontitis + CVD presented elevated MMP-9 concentrations in serum and saliva compared to patients with periodontitis and healthy subjects. Furthermore, hs-CRP was a negative predictor of serum and salivary MMP-9.     

Thermodynamic and Dynamic Properties of Micellar Aggregates of Nonionic Surfactants with Short Hydrophobic Tails

The densities and viscosities of binary aqueous mixtures of poly(ethylenoxide)hexanols [C₆H₁₃(OCH₂CH₂)_mOH, C₆E_m] (m= 3, 4, and 5) have been studied in the micellar composition range. For the same surfactants the self-diffusion coefficients in mixtures with heavy water have been determined by the spin-echo pulsed field gradient method. The volumetric data are interpreted by means of the phase separation model, and values of the CMC, volume change, and standard free energy change of micellization are obtained. From the viscosity data the hydration numbers of the surfactant hydrophilic head in the micellar state are computed; they are in agreement with those obtained from HDO self-diffusion data. The surfactant self-diffusion data are used to calculate the apparent micelle radius and the aggregation number. The micellization parameters obtained for the different surfactants are compared and discussed.     

Comparison between post-Hartree-Fock and DFT methods for the study of strength and mechanism of cleavage of Hg(SINGLE BOND)C bond

A parallel MP2 and DFT study was performed for mercury dihalides and for representative organomercury compounds including a Hg(SINGLE BOND)C bond. From a methodological point of view, medium-size basis sets provide reliable general trends for a number of properties already at the HF level. However, quantitative results can only be obtained including correlation energy by post-Hartree-Fock (even at the MP2 level) or density functional models and adding f-polarization functions on Hg. At this level, geometrical parameters are sufficiently accurate for most purposes and reliable thermodynamic data can be obtained using isodesmic reactions. The advantage of the DF approach resides, besides the shorter computation times, in the lower dependence of the results on the basis set. From a more general point of view, all the computations indicate that Hg(SINGLE BOND)C bond breaking is favored, decreasing the electronegativity of further substituents. We have next investigated the reaction mechanism for cleavage of the Hg(SINGLE BOND)C bond by halogenic acids. Our results show that the reaction occurs through a one-step mechanism in which, however, bond forming and breaking are not completely synchronous. © 1997 John Wiley & Sons, Inc.