Automated Optimized Synthesis of [18F]FLT Using Non-Basic Phase-Transfer Catalyst with Reduced Precursor Amount

3′-deoxy-3′-[¹⁸F]fluorothymidine ([¹⁸F]FLT) is a positron emission tomography (PET) tracer useful for tumor proliferation assessment for a number of cancers, particularly in the cases of brain, lung, and breast tumors. At present [¹⁸F], FLT is commonly prepared by means of the nucleophilic radiofluorination of 3-N-Boc-5′-O-DMT-3′-O-nosyl thymidine precursor in the presence of a phase-transfer catalyst, followed by an acidic hydrolysis. To achieve high radiochemical yield, relatively large amounts of precursor (20–40 mg) are commonly used, leading to difficulties during purification steps, especially if a solid-phase extraction (SPE) approach is attempted. The present study describes an efficient method for [¹⁸F]FLT synthesis, employing tetrabutyl ammonium tosylate as a non-basic phase-transfer catalyst, with a greatly reduced amount of precursor employed. With a reduction of the precursor amount contributing to lower amounts of synthesis by-products in the reaction mixture, an SPE purification procedure using only two commercially available cartridges—OASIS HLB 6cc and Sep-Pak Alumina N Plus Light—has been developed for use on the GE TRACERlab FX N Pro synthesis module. [¹⁸F]FLT was obtained in radiochemical yield of 16 ± 2% (decay-corrected) and radiochemical purity >99% with synthesis time not exceeding 55 min. The product was formulated in 16 mL of normal saline with 5% ethanol (v/v). The amounts of chemical impurities and residual solvents were within the limits established by European Pharmacopoeia. The procedure described compares favorably with previously reported methods due to simplified automation, cheaper and more accessible consumables, and a significant reduction in the consumption of an expensive precursor.     

Random double sequences with a given number of steps

Selected statistics are studied of a random n-dimensional double sequence consisting of m₀ zeros, m₁ ones, m₀ + m₁=n, and k steps for different restrictions on m₀, m₁, k.Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 42, No. 4, pp. 512–518, April, 1990.     

Inorganic nanoparticles as carriers of nucleic acids into cells

The transfer of nucleic acids (DNA or RNA) into living cells, that is, transfection, is a major technique in current biochemistry and molecular biology. This process permits the selective introduction of genetic material for protein synthesis as well as the selective inhibition of protein synthesis (antisense or gene silencing). As nucleic acids alone are not able to penetrate the cell wall, efficient carriers are needed. Besides viral, polymeric, and liposomal agents, inorganic nanoparticles are especially suitable for this purpose because they can be prepared and surface-functionalized in many different ways. Herein, the current state of the art is discussed from a chemical viewpoint. Advantages and disadvantages of the available methods are compared.     

New carbacylamidophosphates (CAPh) and CAPh-containing coordination compounds: structural peculiarities

Structural Chemistry - The new carbacylamidophosphate derivative HL1 (1) with general formula Cl3CC(O)N(H)P(O)(CH2C5H4N)2 named...     

Fragmentation dynamics of size-selected pyrrole clusters prepared by electron impact ionization: forming a solvated dimer ion core

Structure and dynamics of size-selected charged pyrrole clusters have been studied by means of molecular beam scattering experiments and ab initio calculations. Small neutral Pyn clusters were produced in Py/He mixture expansions, and the scattering experiment with a secondary beam of He-atoms was exploited to select the neutral clusters of different sizes. The complete size-selected fragmentation patterns for the neutral dimer to the tetramer after an electron impact ionization at 70 eV were obtained from the measurements of the angular and velocity distributions at different fragment masses. All the investigated cluster sizes decay mainly to the monomer ions Py+1 (from 60 to 80% of the corresponding neutral size) and to the dimer ion Py+2 (20-30%). The trimer ions Py+3 are generated to less than 10% from the neutral trimer and tetramer. To explain the observed results, we have calculated the structures and energetics of pyrrole clusters up to the trimer for the neutral and the ionic state using DFT and PMP2 methods. The ab initio calculations show that ionized pyrrole clusters are formed with a dimeric core that is solvated by neutral pyrrole molecules. In addition, the ground and ionic state of Py-Ar complexes were calculated at CCSD(T) level with extended basis in relevance to the mixed clusters produced in supersonic expansions of Py seeded in Ar. The calculated dissociation energies of the Py-Ar and (Py-Ar)+ complexes indicate that Ar atoms are able to rapidly evaporate after ionization. The combined analysis of the fragmentation probabilities, and calculations allowed us to estimate the distribution of energy deposited in the clusters after the electron impact, which peaks above 1 eV and has a tail up to 5 eV.     

Bioluminescent Enzymatic Assay as a Tool for Studying Antioxidant Activity and Toxicity of Bioactive Compounds

A bioluminescent assay based on a system of coupled enzymatic reactions catalyzed by bacterial luciferase and NADH:FMN‐oxidoreductase was developed to monitor toxicity and antioxidant activity of bioactive compounds. The assay enables studying toxic effects at the level of biomolecules and physicochemical processes, as well as determining the toxicity of general and oxidative types. Toxic and detoxifying effects of bioactive compounds were studied. Fullerenols, perspective pharmaceutical agents, nanosized particles, water‐soluble polyhydroxylated fullerene‐60 derivatives were chosen as bioactive compounds. Two homologous fullerenols with different number and type of substituents, C₆₀O_2–4(OH)_20–24 and Fe_0.5C₆₀(OH) _xO_y (x + y = 40–42), were used. They suppressed bioluminescent intensity at concentrations >0.01 g L^?1 and >0.001 g L^?1 for C₆₀O_2–4(OH)_20‐24 and Fe_0.5C₆₀(OH)_xO_y, respectively; hence, a lower toxicity of C₆₀O_2–4(OH)_20–24 was demonstrated. Antioxidant activity of fullerenols was studied in model solutions of organic and inorganic oxidizers; changes in toxicities of general and oxidative type were determined; detoxification coefficients were calculated. Fullerenol C₆₀O_2–4(OH)_20–24 revealed higher antioxidant ability at concentrations 10^?17?10^?5 g L^?1. The difference in the toxicity and antioxidant activity of fullerenols was explained through their electron donor/acceptor properties and different catalytic activity. Principles of bioluminescent enzyme assay application for evaluating the toxic effect and antioxidant activity of bioactive compounds were summarized and the procedure steps were described.     

Proton transfer and isotope‐induced reaction in aniline cluster ions

The proton transfer (PT) and other intraclusters reactions occurring after electron ionization of aniline clusters (PhNH₂)_N are investigated by the time‐of‐flight mass spectrometry. The mass spectra are recorded for different expansion conditions leading to the generation of different cluster sizes. Several fragment ions are shown to originate from intracluster reactions, namely, [Ph]⁺, [PhNH₃]⁺ and [Ph–N–Ph]⁺. Reaction schemes are proposed for these ions starting with the PT process. The mass region beyond the monomer mass is dominated by cluster ions (PhNH₂)_n⁺ accompanied by satellites with ±H and +2H. In experiments with deuterated species, new fragment ions are identified. The aniline isotopomer d₅‐PhNH₂ yields the fragment ions (PhNH₂)_n?(N–Ph–NH₂)⁺. Analogical series is observed in experiments with d₇‐PhND₂, and additional fragments occur corresponding to (PhND₂)_n?(D₂N–ND–Ph–ND–ND₂)⁺ ions. The possible reaction pathways to these ions and the unusual isotope effects are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

System peaks in capillary zone electrophoresis of anions with negative voltage polarity and counter-electroosmotic flow

The system peaks that often appear on electropherograms in anion separation by CE with indirect spectrophotometric detection, negative voltage polarity and cathodic EOF are studied. The system peaks are shown to correspond to the zones with the changed concentration of the BGE constituents; they appear while the zone of each analyte anion passes through the outlet end of the capillary and are transported to the detector by EOF. An equation is suggested for predicting migration times of the system peaks with an error of 1%. The ratios of the system peak area to the analyte peak area are found to amount to 20%. It is shown that it is possible to avoid overlapping of the system peaks and analyte peaks by controlling the EOF velocity owing to hydrodynamic pressure. Using the mathematical simulation of CE shows that the system peaks and baseline shift can result from changing the transference numbers of the BGE ions and analyte ions at the capillary edge. The cases when the system peak may be incorrectly identified as the peak of analyte ion are considered. In order to avoid such errors, some practical recommendations are given.     

Photochemistry of HI on argon and water nanoparticles: hydronium radical generation in HI·(H2O)n

Photochemistry of HI molecules on large Ar(n) and (H(2)O)(n), n ～ 100-500, clusters was investigated after excitation with 243 nm and 193 nm laser radiation. The measured H-fragment kinetic energy distributions pointed to a completely different photodissociation mechanism of HI on water than on argon clusters. Distinct features corresponding to the fragment caging (slow fragments) and direct exit (fast fragments) were observed in the spectra from HI photodissociation on Ar(n) clusters. On the other hand, the fast fragments were entirely missing in the spectrum from HI·(H(2)O)(n) and the slow-fragment part of the spectrum had a different shape from HI·Ar(n). The HI·(H(2)O)(n) spectrum was interpreted in terms of the acidic dissociation of HI on (H(2)O)(n) in the ground state, and hydronium radical H(3)O formation following the UV excitation of the ionically dissociated species into states of a charge-transfer-to-solvent character. The H(3)O generation was proved by experiments with deuterated species DI and D(2)O. The experiment was complemented by ab initio calculations of structures and absorption spectra for small HI·(H(2)O)(n) clusters, n = 0-5, supporting the proposed model.     

Expected and unforeseen reactions of 2,3,3-trimethyl-1λ6-isothiazolidine-1,1,4-trione and their spiro derivative

Herein, we present a full account of our studies with respect to the reactivity of insufficiently explored 1λ⁶-isothiazolidine-1,1,4-triones (so-called β-keto-γ-sultams). This heterocyclic system possesses two reaction centers: the EWG-activated methylene group and the carbonyl moiety which were investigated in the course of present study. 2,3,3-Trimethyl-1λ⁶-isothiazolidine-1,1,4-trione and 4-methyl-5λ⁶-thia-4-azaspiro[2.4]heptane-5,5,7-trione were chosen as representatives of the given class of substances. The former is a classical spatially uncomplicated model substance, the latter bearing a spiranic cyclopropane substituent is interesting in terms of evaluation of strain cycle effects. Indeed, the data obtained convey information about the impact of the highly strained substituent on the reaction centers of the ketosultam core. Thus, in addition to less stability of the strained spiranic ketosultam, the reactivity of its carbonyl group is suppressed whereas the activity of the methylene group is enhanced being compared with the nonspiranic substrate. Apart from the difference in the chemical character of the given β-keto-γ-sultams we faced unprecedented products (1,1-dioxo-5-[2-(triphenylphosphonio)acetyl]-2,3-dihydro-1H-1λ⁶-isothiazol-4-olates) formed during the course of the reaction with the Wittig reagent triphenylcarbethoxymethylenephosphorane.