Palladium catalysed cyclisation-carbonylation of enynes to give cyclic gamma,delta-unsaturated acids

In the presence of acetic acid, trifurylphosphine and CO (2 atm), palladium catalyses the conversion of a range of enynes to cyclic delta,gamma-unsaturated carboxylic acids in good yield.     

The complexity of catalysis: origins of enantio- and diastereocontrol in sulfur ylide mediated epoxidation reactions

The reaction of chiral sulfur ylides with aldehydes and ketones has emerged as a useful asymmetric process for the synthesis of epoxides. Processes employing either catalytic or stoichiometric amounts of sulfides have been developed. Although a large number of chiral sulfur ylides have been tested in the epoxidation process, only a few have delivered high diastereo- and enantio- selectivity. This review examines the factors that influence stereocontrol (steric hindrance of the sulfide, ylide conformation, ylide face selectivity, reversibility of betaine formation, solvent, and metal salts). This analysis leads to the conclusion that high reversibility in betaine formation leads to high diastereoselectivity but low enantioselectivity, and non-reversible betaine formation leads to low diastereoselectivity and high enantioselectivity (provided that other criteria are met). To achieve both high diastereoselectivity and high enantioselectivity simultaneously, requires non-reversible formation of the anti-betaine and reversible formation of the syn-betaine. Thus, factors that influence the degree of reversibility in betaine formation are critically important since with subtle changes in reaction conditions (solvent, temperature, metal ions) both high enantio- and diastereoselectivity can often be achieved.     

Determination of cobalt in urine by gas chromatography-mass spectrometry employing nickel as an internal standard.

In addition to the electric field and pH gradient used in isoelectric focusing, a recently introduced technique, isoelectric focusing (or electrical hyperlayer) field-flow fractionation, employs the flow of the liquid carrier through a thin separation channel as a third factor affecting separation. Focusing of cytochrome c (CYTC) in a trapezoidal cross-section channel of 0.875 ml volume and 25 cm length was investigated as a function of the injection procedure, relaxation time, flow-rate of the carrier ampholyte solution and applied electric power. The influence of different initial conditions was also investigated by computer simulation. Both computed and experimental data showed an important contribution of the injection procedure and relaxation time on the retention and shape of the CYTC zone. It follows from these data that the sample should be injected as a narrow zone into the centre of the stream rather than homogeneously together with the carrier solution. For the described experimental set-up it could be demonstrated that the time necessary for zone formation should be at least 15 min and that relaxation times in excess to 20 min do not influence the final shape of the CYTC zone. It could further be shown experimentally that the sample must be injected under an applied electric field, that the relaxation time should be about 10 min, that the elution flow-rate should not be larger than 100 μl/min, that focusing becomes more efficient with increasing electric fields and that, for a given assembly and specified flow conditions, there is an electric power window only within which proper operation is possible.     

Reverse isotope dilution alpha spectrometry using plutionium-239 spike for determining plutonium concentration in high burn-up fuel samples without purification from americium-241 and a bulk of other impurities

A reverse isotope dilution alpha spectrometric /R-IDAS/ method using²³⁹Pu as a spike is described for the determination of plutonium concentration in high burn-up fuel samples wth²³⁸Pu/(²³⁹Pu+²⁴⁰Pu) alpha activity ratio >0.5, without resorting to any purification from²⁴¹Am and a bulk of other impurities. It involves the addition of a pre-clibrated spike solution to a known aliquot of the plutonium sample solution followed by source preparation using TEG as a spreading agent. The results obtained on a number of plutonium samples containing 20–80% of²⁴¹Am /alpha activity wise/ using this method are compared with those achieved by R-IDAS using purification with TTA, with respect to precision and accuracy. Precision and accuracy of 0.5% are demonstrated. This method eliminates the need of any separation and purification of plutonium from²⁴¹Am and a bulk of other impurities like uranium.     

A Ferroelectric Aminophosphonium Cyanoferrate with a Large Electrostrictive Coefficient as a Piezoelectric Nanogenerator

Hybrid materials possessing piezo- and ferroelectric properties emerge as excellent alternatives to conventional piezoceramics due to their merits of facile synthesis, lightweight nature, ease of fabrication and mechanical flexibility. Inspired by the structural stability of aminophosphonium compounds, here we report the first A₃BX₆ type cyanometallate [Ph₂(ⁱPrNH)₂P]₃[Fe(CN)₆] ( 1 ), which shows a ferroelectric saturation polarization (P_s) of 3.71 μC cm⁻². Compound 1 exhibits a high electrostrictive coefficient (Q₃₃) of 0.73 m⁴ C⁻², far exceeding those of piezoceramics (0.034–0.096 m⁴ C⁻²). Piezoresponse force microscopy (PFM) analysis demonstrates the polarization switching and domain structure of 1 further confirming its ferroelectric nature. Furthermore, thermoplastic polyurethane (TPU) polymer composite films of 1 were prepared and employed as piezoelectric nanogenerators. Notably, the 15 wt % 1 -TPU device gave a maximum output voltage of 13.57 V and a power density of 6.03 μW cm⁻².     

Role of Cu-doping in CdTe thin films: Experiments and simulations

Due to its outstanding physical properties, CdTe is used to fabricate high efficiency solar cells. However, its high work function poses a challenge, and hence, to fabricate an efficient CdTe-based solar cell, Cu-doping may be useful. Here, we present the role of temperature-dependent Cu-doping in radio frequency sputter-deposited CdTe films and the related changes occurring in their optical, electrical, structural and microstructural properties. For instance, Cu-doping at different temperatures leads to an increase in the grain size and a reduction in the optical reflectance with increasing temperature. In addition, Kelvin probe force microscopy measurements reveal that the work function is found to be smaller corresponding to the annealing temperature of 473 K, whereas resistivity measurements show that it decreases with increasing temperature (the lowest value of resistivity is found to be 1.8 × 10⁻² Ω-cm). To understand the electronic structure of CdTe before and after Cu-doping, we have carried out first-principles density functional theory (DFT) simulation, which reveals a strong hybridization among Cu, Cd and Te atoms. This study paves the way to fabricate efficient Cu-doped CdTe-based solar cells.     

Development,stability-indicating assessment,and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 μm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 μl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.     

Regio- and Z-Selective Alkyne Hydroamination and Hydrophenoxylation using Tetrafluoro-λ6-Sulfanyl Alkynes under Superbasic,Naked Anion Conditions

Alkyne hydroamination is an effective approach for the production of enamines and enamine-containing N-heterocycles. However, stereoselectivity control is a considerable challenge in this reaction because of the electronic repulsion between an incoming nitrogen lone pair and the alkyne π-system. Herein, we propose a methodology involving β-regio- and Z-selective alkyne hydroamination by using tetrafluoro-λ⁶-sulfanyl (SF₄) alkynes under superbasic, naked anion conditions. The reaction is compatible with a wide variety of N-heterocycles, including indoles, carbazoles, pyrazoles, and imidazoles, and selectively furnishes SF₄-linked Z-vinyl enamines with β-regioselectively. Moreover, the method can be extended to the β- and Z-controlled, base-mediated alkyne hydrophenoxylation with phenols to provide SF₄-linked Z-vinyl ethers in high yields. As the SF₄ unit has attracted attention as a bioisostere for alkynes, p-benzenes, bicyclo[1.1.1]pentyl (BCP) groups, and cubanes in medicinal chemistry, this chemistry represents an effective approach to creating novel drug candidates incorporating SF₄-containing molecules.     

Gas Hydrate Formation in Reversed Micelles

We describe a technique to modify protein solubility and optimize enzyme activity in reversed micellar solutions. The technique is based on the ability of hydrates of natural gas to form in the micro-aqueous phase. Clathrate hydrates are crystalline inclusions of water and gas, and their formation in bulk water has traditionally been studied with relevance to natural gas recovery. We have found that hydrates can form in the environment of the microaqueous pools of reversed micelles, and that their extent of formation can be well controlled through the thermodynamic variables of temperature and pressure. Additionally, formation of hydrates affects the size and aggregation number of the micelles, and thus influences the solubility and conformation of encapsulated proteins. We demonstrate how the concept can be used in two applications: (i) protein extraction into reversed micelles and subsequent recovery, and (ii) optimization of enzyme activity in reversed micelles.     

Highly stereoselective addition reactions of metallated trans-1,3-dithiane-1,3-dioxide to aldehydes

The sodium anion of trans-1,3-dithiane-1,3-dioxide reacts with unhindered aromatic and heteroaromatic aldehydes to give adducts with 95:5 to 97:3 diastereoselectivity.