The trajectory scaling function for period doubling bifurcations in flows

We extend the trajectory scaling function as defined for maps to flows whose dynamics is governed by ordinary differential equations. The results are obtained for the Duffing oscillator and are expected to be the same for other dissipative flows as well.     

Surfactant/oil/water system for the determination of selenium in eggs by graphite furnace atomic absorption spectrometry

An oil-in-water formulation has been optimized to determine trace levels of selenium in whole hen eggs by graphite furnace atomic absorption spectrometry. This method is simpler and requires fewer reagents when compared with other sample pre-treatment procedures. Graphite furnace atomic absorption spectrometric (GF AAS) measurement was carried out using standard addition calibration and Pd as a modifier. The precision, expressed as relative standard deviation, was better than 5% and the limit of detection was 1 µg L^− 1. The validation of the method was performed against a standard reference material Whole Egg Powder (RM 8415), and the measured Se corresponded to 95.2% of the certified value. The method was used for the determination of the Se level in eggs from hens treated with Se dietary supplements. Inorganic and organic Se sources were added to hen feed. The Se content of eggs was higher when hens were fed with organic Se compared to the other treatments. The proposed method, including sample emulsification for subsequent Se determination by GF AAS has proved to be sensitive, reproducible, simple and economical.     

Determination of thiodicarb using a biosensor based on alfalfa sprout peroxidase immobilized in self-assembled monolayers

A biosensor based on alfalfa sprout (Medicago sativa) homogenate as a source of peroxidase is proposed for the determination of thiodicarb by square-wave voltammetry. This enzyme was immobilized in self-assembled monolayers of l-cysteine on a gold electrode. Several parameters were investigated to evaluate the optimum conditions for operation of the biosensor. The analytical curve was linear for thiodicarb concentrations of 2.27 × 10⁻⁶ to 4.40 × 10⁻⁵ mol L⁻¹ with a detection limit of 5.75 × 10⁻⁷ mol L⁻¹. The lifetime of the Au-alfalfa sprout-SAMs was 20 days (at least 220 determinations). The average recovery of thiodicarb from samples of vegetable extracts ranged from 99.02 to 101.04%. The results obtained for thiodicarb in vegetable extracts using the proposed method are in close agreement with those using a high performance liquid chromatography procedure at the 95% confidence level.     

Analysis of phenylpiperazine-like stimulants in human hair as trimethylsilyl derivatives by gas chromatography–mass spectrometry

A simple and sensitive procedure, using p-tolylpiperazine (pTP) as internal standard (IS), has been developed and validated for the qualitative and quantitative analysis of 1-(3-trifuoromethylphenyl)piperazine (TFMPP), 1-(3-chlorophenyl)piperazine (mCPP) and 1-(4-methoxyphenyl)piperazine (MeOPP) in hair. Drug extraction was performed by incubation with 1 M sodium hydroxide at 50 °C for 40 min, and the extracts were cleaned up using mixed-mode solid-phase extraction. The analytes were derivatized with N-methyl-N-(trimethylsilyl) trifluoroacetamide with 5% trimethylchlorosilane and analysed by gas chromatography–mass spectrometry in the selected ion monitoring mode. The method was linear from 0.05 (lower limit of quantitation) to 4 ng mg⁻¹, with correlation coefficients higher than 0.99 for all the compounds. Intra- and interday precision and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation, and the sample cleanup step presented a mean efficiency higher than 90% for all the analytes. Due to its simplicity and speed, this method can be successfully applied in the screening and quantitation of these compounds in hair samples, and is suitable for application in forensic toxicology routine analysis.     

Superparamagnetic relaxation Mössbauer spectra by phonon–magnon interaction using the multilevel method

The formation of local moments and the effect of charge carrriers in dilute magnetic semiconductors can be well understood using local probe techniques like Mossbauer Spectroscopy. We report here on Mossbauer studies in the systems Fe_0.008Ge_{1 ? x} D _x (D = As, Bi), Fe_0.008Ge_{1 ? x} In _x , and Fe_0.008Ge_{1 ? x} Sn _x . At room temperature magnetic interactions were observed for donor (D) impurities at the Fe site in the Fe_0.008Ge system. No such magnetic ordering was observed for acceptor (In) or neutral (Sn) impurities.     

Mass measurement of neutron-rich isotopes from51Ca to72Ni

The ground state masses of thirty-nine neutronrich nuclei from⁵¹Ca to⁷²Ni have been measured using the Time-of-Flight Isochronous (TOFI) spectrometer. Eight of these masses have been measured for the first time and thirty-one are remeasurements of neutron-rich nuclei previously reported. Good agreement between these results and a previous TOFI experiment was observed except for the most neutron-rich isotopes of vanadium through iron with the present results being more bound and in better agreement with theory. The low binding energy of⁶⁸Ni, as indicated by an unreasonably low two-neutron separation energy, suggests the presence of a high-lying, long-lived isomeric state in this nucleus.     

Luminescence quantum yield determination for molecules adsorbed onto solid powdered particles.

A new methodology for the determination of the fluorescence quantum yield of dyes adsorbed onto microcrystalline cellulose is presented and applied to rhodamine 101, cresyl violet and auramine O. It is based on a previously reported method by Ruetten and Thomas (J. Phys. Chem., 1998, 102, 598-606), which is not applicable to the dyes used in the present study. It uses ground-state diffuse reflectance spectra obtained with and without filters, which prevents the luminescence of the dye from reaching the integrating sphere and the photodetector. New equations are presented here, correcting for the fluorescence emission of the dye, which depends on the detector sensitivity. Cut-on filters, which have a transmittance close to unity in the absorption region, and close to zero in the emission region, of the dye are used to obtain corrected reflectance spectra. The influence of the substrate was also taken into account. This methodology may be applied to other probes and surfaces or emissions of a different nature (i.e., phosphorescence or delayed fluorescence), and constitutes a very simple and general procedure to solve the important problem of luminescence quantum yield determination of probes adsorbed onto solid powdered surfaces.     

Stress and Strain Analysis of Pipelines with Localized Metal Loss

This paper presents the analysis of stress and strain data acquired with the finite element method and with tests that used post-yielding strain gages bonded onto the external surface of pipes that suffered thickness metal loss and that had been loaded with internal pressure. These metal loss areas were produced by three different processes: actual internal corrosion, careful machining of external patches by spark-erosion, and milling of internal or external patches to simulate limited or extensive strip corrosion defects with depths up to 70% of the pipe’s thickness. Results show that: (1) the extensive longitudinal internal or external defect areas behave as extensive strips with a high degree of freedom to deform elastically and plastically in the circumferential and thickness directions, and (2) large restraints are offered to the longitudinal strains by the non-corroded thick walls parallel to the strip. Using the above experimental observation, a simple mathematical model was developed to predict the burst pressure of pipes with longitudinal extensive and reasonably constant depths of metal loss. This model employed thin-pipe-strength-of-material equations associated to a bulging correction factor, the material’s uniaxial ultimate strength and the von Mises criterion. The onset of plastic collapse predicted by the simple model was successfully compared with results determined from actual hydrostatic tests that were carried out with full scale pipe specimens and from finite element results generated by the use of a commercial program. The developed model was also helpful in showing that the yield and burst behaviors of new or corroded pipeline specimens under laboratory test conditions can be directly compared and extended to the yield and burst behaviors of buried pipeline in field operation.