Total Diet Study: Mg and Mn content estimation of a Market Basket of São Paulo state (Brazil) by Instrumental Neutron Activation

Total Diet Studies (TDS) have been carried out to estimate dietary intakes of the essential and toxic elements for a large-scale population over a specific period of time. In this study, the TDS was based on the evaluation of food representing a Market Basket (MB), which reflected the dietary habits of the São Paulo State population, corresponding to 72 % of the average food consumption for the state of São Paulo. In the present Total Diet Study, magnesium and manganese concentrations were determined in 30 of the most consumed food groups of a MB of São Paulo State, Brazil. Instrumental Neutron Activation Analysis (INAA) has been successfully used on a regularly basis in several areas of nutrition and foodstuffs. Element concentrations were determined by INAA in freeze-dried samples and ranged in mg kg^?1. Mg 41.4 (fats)–5287 (coffee) and Mn 0.12 (prime grade beef)–32.9 (coffee). The average daily Mg and Mn intake was calculated by multiplying the concentration of each element in each table-ready food group by the respective weight (g day^?1) of the food group in the MB and adding the products from all food groups. The results of daily dietary intakes in this study were: Mg 174.8 and Mn 1.34 mg day^?1. Theses values were lower than the adequate intake (AI) proposed by the Food and Nutrition Board of the Institute of Medicine (USA National Academy) for adults. The low levels of Mg and Mn intakes presented in this TDS are probably due to the fact that MB of this study represented only 72 % of the weight of the most consumed household foods of São Paulo State.     

Evaluation of As,Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

Three CRMs of different matrix composition were analysed, representing an environmental matrix sample (BCR–320R Channel Sediment), a botanical matrix sample (SRM 1547 Peach Leaves) and a zoological matrix sample (SRM 1566b Oyster Tissue). The element mass fractions were obtained using the KayWin program. Analytical measurement uncertainty was determined by two approaches: (1) the routine procedure applying combination of the overall uncertainty u(m) = 3.5 % and statistical uncertainty of the peak area determination and (2) the procedure applying the dedicated ERON program for calculating uncertainty. Performance of altogether 31 certified values was tested by means of calculating E _n numbers. For the remaining 52 non-certified values, comparison between uncertainties obtained by the two approaches was made. When using the first approach, the E _n number showed satisfactory performance in 28 cases; by using the second approach, the E _n number showed satisfactory performance in 27 cases. None of the unsatisfactory performances (E _n  > 1) appeared to be of systematic nature. The uncertainties obtained by applying the two approaches revealed a big extent of consistency. As the present nuclear database lacks lot of data that serve as input to the ERON program, in particular uncertainties of Q ₀ factors, estimates need to be introduced for the missing values, emphasising the urgent need to upgrade the database with missing data.     

The isotypic hydrogen phosphate and arsenate dihydrates M2HXO4·2H2O (M = Rb,Cs; X = P,As)

The four isotypic alkaline metal monohydrogen arsenate(V) and phosphate(V) dihydrates M₂HXO₄·2H₂O (M = Rb, Cs; X = P, As) [namely dicaesium monohydrogen arsenate(V) dihydrate, Cs₂HAsO₄·2H₂O, dicaesium monohydrogen phosphate(V) dihydrate, Cs₂HPO₄·2H₂O, dirubidium monohydrogen arsenate(V) dihydrate, Rb₂HAsO₄·2H₂O, and dirubidium monohydrogen phosphate(V) dihydrate, Rb₂HPO₄·2H₂O] were synthesized by reaction of an aqueous H₃XO₄ solution with one equivalent of aqueous M₂CO₃. Their crystal structures are made up of undulating chains extending along [001] of tetrahedral [XO₃(OH)]⁻ anions connected via strong O—H...O hydrogen bonds. These chains are in turn connected into a three‐dimensional network via medium‐strength hydrogen bonding involving the water molecules. Two crystallographically different M⁺ cations are located in channels running along [001] or in the free space of the [XO₃(OH)]⁻ chains, respectively. They are coordinated by eight and twelve O atoms forming irregular polyhedra. The structures possess pseudosymmetry. Due to the ordering of the protons in the [XO₃(OH)]⁻ chains in the actual structures, the symmetry is reduced from C2/c to P2₁/c. Nevertheless, the deviation from C2/c symmetry is minute.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.     

Antimicrobial properties of viscose yarns ring-spun with integrated amino-functionalized nanocellulose

Cellulose - Bio-based, renewable and biodegradable products with multifunctional properties are also becoming basic trends in the textile sector. In this frame, cellulose nanofibrils (CNFs) have...     

The Diversity of a Polyclonal FluCell-SELEX Library Outperforms Individual Aptamers as Emerging Diagnostic Tools for the Identification of Carbapenem Resistant Pseudomonas aeruginosa

Textbook procedures require the use of individual aptamers enriched in SELEX libraries which are subsequently chemically synthesized after their biochemical characterization. Here we show that this reduction of the available sequence space of large libraries and thus the diversity of binding molecules reduces the labelling efficiency and fidelity of selected single aptamers towards different strains of the human pathogen Pseudomonas aeruginosa compared to a polyclonal aptamer library enriched by a whole-cell-SELEX involving fluorescent aptamers. The library outperformed single aptamers in reliable and specific targeting of different clinically relevant strains, allowed to inhibit virulence associated cellular functions and identification of bound cell surface targets by aptamer based affinity purification and mass spectrometry. The stunning ease of this FluCell-SELEX and the convincing performance of the P. aeruginosa specific library may pave the way towards generally new and efficient diagnostic techniques based on polyclonal aptamer libraries not only in clinical microbiology.     

A Promising Thermodynamic Study of Hole Transport Materials to Develop Solar Cells: 1,3-Bis(N-carbazolyl)benzene and 1,4-Bis(diphenylamino)benzene

The thermochemical study of the 1,3-bis(N-carbazolyl)benzene (NCB) and 1,4-bis(diphenylamino)benzene (DAB) involved the combination of combustion calorimetric (CC) and thermogravimetric techniques. The molar heat capacities over the temperature range of (274.15 to 332.15) K, as well as the melting temperatures and enthalpies of fusion were measured for both compounds by differential scanning calorimetry (DSC). The standard molar enthalpies of formation in the crystalline phase were calculated from the values of combustion energy, which in turn were measured using a semi-micro combustion calorimeter. From the thermogravimetric analysis (TGA), the rate of mass loss as a function of the temperature was measured, which was then correlated with Langmuir’s equation to derive the vaporization enthalpies for both compounds. From the combination of experimental thermodynamic parameters, it was possible to derive the enthalpy of formation in the gaseous state of each of the title compounds. This parameter was also estimated from computational studies using the G3MP2B3 composite method. To prove the identity of the compounds, the ¹H and ¹³C spectra were determined by nuclear magnetic resonance (NMR), and the Raman spectra of the study compounds of this work were obtained.     

Conformationally controlled intramolecular heterocyclization of 2,4-diaminoperfluoro-4-methyl-2-pentenethiocyanate-3

Perfluoro-2-methyl-2-pentene-thiocyanate-3 reacts with ammonia to give 2,4-diaminoperfluoro-4-methyl-2-pentenethiocyanate-3 ( 4 ) and 2-aminoperfluoro-4, 4-dimethyl-4,5-dihydro-5-ethylidene-1,3-thiazole ( 5 ). Compound 4 is kinetically stable and at 150°C under-goes rotational isomerization to afford the cyclic isomer 2-amino-4,4-bis(trifluoromethyl)-4,5-dihydro-5-(1-aminoperfluoroethylidene) -1,3-thiazole ( 6 ). Intramolecular cyclizations, resulting in the thiazolines 5 and 6 , proceed likewise via the Thorpe reaction. For compounds 4–6 , X-ray diffraction analyses were undertaken and IR spectra in solution and in solid state were investigated. It is supposed that a high kinetic preference for formation of 4 and the fact that it does not undergo spontaneous cyclization in ammonolysis stem from the NH …︁ N intramolecular hydrogen bonding between two amino groups.