Latex particle size distribution by dynamic light scattering: novel data processing for multiangle measurements

Multiangle dynamic light scattering (DLS) provides a better estimate of particle size distributions (PSD) than single-angle DLS. However, multiangle data treatment requires appropriate weighting of each autocorrelation measurement prior to calculation of the PSD. The weighting coefficients may be directly obtained from (i). the autocorrelation baselines or (ii). independent measurement of the average light intensity by elastic light scattering. However, the propagation of errors associated with such procedures may intolerably corrupt the PSD estimate. In this work, an alternative recursive least-squares calculation is proposed that estimates the weighting coefficients on the basis of the complete autocorrelation measurement. The method was validated through a numerical example that simulates the analysis of a polystyrene latex with a bimodal PSD and with "measurements" taken at 10 detection angles. The ill-conditioned nature of the problem determines that the "true" PSD cannot be recovered, even in the absence of errors. A sensitivity analysis was carried out to determine the effect of errors in the weighting coefficients on the PSD recoveries.     

Substituent effects on scalar J(13C, 13C) couplings in pyrimidines. An experimental and DFT study

One- two- and three 13C, 13C (n = 1, 2, 3) scalar couplings, (n)J(C,C) in a set of pyrimidine derivatives were studied both experimentally at natural abundance and theoretically by their DFT calculation of all four contributions. Trends of non-contact terms are discussed and substituent effects are rationalized, comparing some of them with the corresponding values in benzene and pyridine. Although substituent effects on non-contact terms are relatively important, the whole trend is dominated by the Fermi contact term. According to the current literature, substituent effects on 1J(C,C) couplings in benzene derivatives are dominated by the inductive effect, which, apparently, is also the case in nitrogen heteroaromatic compounds. However, some differences observed in this work for substituent effects on 1J(C,C) couplings in pyrimidine derivatives suggest that in the latter type of compounds substituent effects can be affected by the orientation of the ring nitrogen lone pairs.     

Stereoselective synthesis of stannyl enones via palladium-catalyzed and free radical hydrostannation of alkynyl ketones with trineophyltin hydride

A study on the addition of trineophyltin hydride (1) to alkynones under free radical (AIBN and Et3B) and palladium-catalyzed [(PPh3)2PdCl2] conditions is reported. The results obtained indicate that the addition of 1 to eight ynones catalyzed by bis(triphenylphosphine)palladium(II) chloride led in all cases to addition products in very high yields (80-96%). These additions take place with excellent regio- and stereochemistry, leading to the alpha adducts as major products in seven out of the eight cases studied. Also the E adducts, resulting from a syn attack, were the only (seven cases) or the predominant (one case) products. The radical hydrostannations initiated by AIBN of ynones 2-5 with 1 led to addition products in good yields (60-88%); with the more hindered ketones 6 and 7-9 the yields obtained were lower. The radical additions initiated by triethylboron to ynones 2-6 follow a similar pattern but with lower yields; no addition products in the hydrostannation of ynones 7-9 were detected. The new acyl-substituted vinylstannanes, owing to their greater stability compared with that of their tributyl- and trimethylstannyl analogues, can be purified by column chromatography using neutral alumina (in all cases) or silica gel 60 (in most cases) as adsorbents. Full 1H, 13C, and 119Sn NMR data are given.     

Purification and Characterization of a Mannose Recognition Lectin from <Emphasis Type="Italic">Oreochromis niloticus</Emphasis> (Tilapia Fish): Cytokine Production in Mice Splenocytes

The aim of this work was to purify and partially characterize a mannose recognition lectin from Nile tilapia (Oreochromis niloticus) serum, named OniL. OniL was isolated through precipitation with ammonium sulfate and affinity chromatography (Concanavalin A–Sepharose 4B). In addition, we evaluated carbohydrate specificity, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS–PAGE) profiles, and in vitro immunomodulatory activity on mice splenocyte experimental cultures through cytotoxic assays and cytokine production. The ammonium sulfate fraction F2 showed the highest specific hemagglutinating activity (331) and was applied to affinity matrix. Adsorbed proteins (OniL) were eluted with methyl-α-d-mannopyranoside. OniL, a 17-kDa protein by SDS–PAGE constituted by subunits of 11 and 6.6 kDa, showed highest affinity for methyl-α-d-mannopyranoside and d-mannose. Immunological assays, in vitro, showed that OniL did not show cytotoxicity against splenocytes, induced higher IFN-γ production and lower IL-10 as well as nitrite release. In conclusion, OniL lectin was successfully purified and showed a preferential Th1 response in mice splenocytes.     

Utilization of an ionic liquid in situ preconcentration method for the determination of the 15 + 1 European Union polycyclic aromatic hydrocarbons in drinking water and fruit‐tea infusions

An ionic liquid (IL) in situ preconcentration method was optimized and applied to the monitoring of the 15 + 1 European Union polycyclic aromatic hydrocarbons in water and fruit‐tea infusions. The optimized method utilizes 10 mL of water (or infusion) containing 38 μL of the IL 1‐butyl‐3‐methylimidazolium chloride and a content of 36.1 g/L NaCl, which are mixed with Li‐NTf₂ (340 μL, 0.2 g/mL), followed by vortex (4 min) and centrifugation (5 min). The obtained microdroplet containing hydrocarbons is diluted with acetonitrile and injected into an HPLC with UV/Vis and fluorescence detection. The method presented average enrichment factors of 127 for water (tap water and bottled water) and 27 for two fruit‐tea infusions; with average relative recoveries of 86.7 and 106% for water and fruit‐tea infusions, respectively. The method was sensitive, with detection limits ranging from 0.001 to 0.050 ng/mL in water, and from 0.010 to 0.600 ng/mL in fruit‐tea infusions, for the fluorescent hydrocarbons. Real extraction efficiencies ranged from 12.7 to 58.7% for water, and from 20.2 to 117% for the infusions. The method was also fast (～12 min) and free of organic solvents in the extraction step.     

Monitoring chlorophenols in industrial effluents by solid-phase microextraction–gas chromatography–mass spectrometry

A method for the determination of 19 chlorophenols in industrial effluents samples using solid-phase microextraction (SPME) coupled to gas chromatography–mass spectrometry has been developed. Four kinds of different SPME fibres have been studied. Among them, the polyacrylate and carbowax®-divinylbenzene fibres were the most adequate. The extraction process was optimized by means of the experimental design, which allows the study of a large number of factors with a reasonable number of experiments. The optimized method allows the determination of the studied chlorophenols in complex matrices with a high organic content with detection limits down to 0.07?ng?mL^?1 and RSD ranging from 4.4% to 13.8%. The recovery studies with spiked real effluent samples at low levels of chlorophenols ranged from 59.8% to 142.1% for the lowest level (0.5?ng?mL^?1) and from 79.6% to 115.8% for the highest spiked level (2?ng?mL^?1). These results show the suitability of the proposed method to monitor chlorophenols in complex samples. 2,4,5-TCP was detected at concentrations close to its limits of detection in effluents coming from an oil refinery.     

Micellar Extraction of Polycyclic Aromatic Hydrocarbons from Certified Marine Sediment

Abstract

In the present study the extraction of polycyclic aromatic hydrocarbons from a certified marine sediment (SRM 1941a) with a micellar medium of polyoxyethylene 10 lauryl ether by micro-wave- and ultrasound-assisted method has been evaluated. The analysis of extracts has been carried out by HPLC with fluorimetric detection and wavelength programming. Hydrocarbons with more than three rings gave average recoveries of 77.4% and 86.5%, by microwave- and ultrasound-assisted methods respectively, with a mean relative standard deviation better than 6.2%.     

Extraction of nitrofurantoin and its toxic metabolite from urine by supercritical fluids. Quantitation by high performance liquid chromatography with UV detection

A procedure is described for the determination of nitrofurantoin and its toxic metabolite in urine from patients with urinary infection using supercritical fluid extraction (SFE) and liquid chromatography. The standard solution of toxic metabolite (radical anion) was obtained by electrochemical reduction of nitrofurantoin in an aprotic medium and chemical reoxidation with oxygen. In our initial SFE studies to find the adequate extraction parameters, drug solutions were impregnated onto filter paper. Quantitative extractions were achieved when the experiments were carried out under 2500 psi of pressure at a temperature of 80 °C (oven and restrictor) after 20 min of static extraction and 5 min of dynamic extraction. The modifier used was acetonitrile (2.0 ml in a 10 ml extraction column). Nitrofurantoin and its toxic metabolite were detected in urine samples. Both compounds were quantified in the extracts by high performance liquid chromatography (HPLC) with detection at 310 nm. The calibration graph of these compounds in acetonitrile was linear between 10.9 and 378.0 μM (R=0.9995) for nitrofurantoin and between 3.0×10⁻³ and 21.0 μM (R=0.9992) for the metabolite. The detection limits (LOD) were 12.1 and 0.9 μM, respectively. The drug was administered to two patients during 7 days, and all the urine eliminated between 1 day before and 2 days after administration was analyzed. One patient consumed the drug in the form of microcrystals and the other as macrocrystals.     

Characterization of nanostructured epoxy networks modified with isocyanate-terminated liquid polybutadiene

Polybutadiene-block-epoxy prepolymer (DGEBA-b-PBNCO) copolymers with multi-branched topological structure were prepared by reacting isocyanate-multifunctionalized liquid polybutadiene (PBNCO) with DGEBA prepolymer and used to develop nanostructured rubber-modified epoxy thermosets cured with triethylene-tetramine (TETA) as the aliphatic amine. The nanoscopic structure was obtained with the addition of as high as 20 phr of rubber component and successfully demonstrated by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). The glass transition temperature of the rubber-modified epoxy networks was slightly higher than the neat epoxy system. In addition, a unique combination of outstanding toughness and increased modulus and T(g) was achieved in these modified systems, which was attributed to the peculiar morphology associated with a strong interfacial adhesion imparted by the reaction between the isocyanate and hydroxyl groups present in the PBNCO and epoxy resin, respectively. The effect of the PBNCO on the gelation time of the epoxy/TETA system was investigated by rheological techniques. The NCO-functionalized polybutadiene decreased the gelation time, indicating an accelerating effect on the curing process, probably because of the urethane groups formed by the reaction between PBNCO and the epoxy resin during the PB-b-ER block copolymer preparation.