A simple proof of an inequality of Bourgain,Brezis and Mironescu

A simpler proof of a recent inequality of Bourgain, Brezis and Mironescu is given. To cite this article: J. Van Schaftingen, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

A study on the applications of the acoustic design sensitivity analysis of vibrating bodies

The determination of the sensitivity of the acoustical characteristics of vibrating systems with respect to the variation of the design parameters predicting these characteristics is a necessary and important step of the acoustic design and optimization process. Acoustic design sensitivity analysis includes the computation and evaluation of the sensitivity information required for this procedure. In this study, a boundary element code performing the sensitivity analysis of the acoustic pressure by using the matrix sensitivities with respect to different design variables has been developed. The effect of the precision of boundary element discretization on the acoustic pressure sensitivity is examined via this code. The formulation is applied to a multi-source system and the dimension sensitivity analysis of near field pressures of two-dilating-spherical source is performed. The last application is devoted to a real sound source: a washing machine sitting on the floor. Sensitivity of the field pressures to the machine’s dimensions (size), surface velocity and frequency is examined on the bases of the boundary element model of the machine and half-space condition. The impacts of these variables are compared; and a limiting speed for the machine responding both the acoustical and operational requirements is determined.     

Simultaneous determination of cloramphenicol, salicylic acid and resorcinol by capillary zone electrophoresis and its application to pharmaceutical dosage forms

This study demonstrates the separation of active ingredients in acne formulations (salicylic acid, cloramphenicol and resorcinol in presence of azulene) by capillary zone electrophoresis. Factors affecting their separations were the buffer pH and concentration, applied voltage, sample preparation, and presence of additives. Optimun results were obtained with a 50 mM sodium tetraborate-50 mM sodium phosphate, pH 9.0. The carrier electrolyte gave baseline separation with good resolution, short migration times (<6 min), great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.39-1.25 μg ml⁻¹. The procedure was fast and reliable and commercial pharmaceuticals could be analysed without prior sample clean-up procedure.     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

On existence and asymptotic stability of solutions of a nonlinear integral equation

We prove an existence theorem for a nonlinear integral equation being a Volterra counterpart of an integral equation arising in the traffic theory. The method used in the proof allows us to obtain additional characterization in terms of asymptotic stability of solutions of an equation in question.     

Comparison of Several Calibration Procedures for Glass Electrodes in Proton Concentration

Several reported procedures for calibrating glass electrodes in proton concentration are compared. Some recommendations for non-experts are also given. The examined procedures can be classified into two broad categories, namely: those based on direct potential difference measurements of solutions of known proton concentration and those that use one or several pH standards to calibrate the electrode and subsequently measure the pH of solutions containing known proton concentrations. With a single buffer, the two types of procedures lead to equivalent results. However, if two pH buffers are used, the slope of the calibration graph in proton concentration will differ from the real electrode slope to an extent proportional to the difference between the liquid junction potentials of the two buffers. Therefore, any other method is preferable under these circumstances.     

Error Bounds and Implicit Multifunction Theorem in Smooth Banach Spaces and Applications to Optimization

In this paper we provide an error bound estimate and an implicit multifunction theorem in terms of smooth subdifferentials and abstract subdifferentials. Then, we derive a subdifferential calculus and Fritz–John type necessary optimality conditions for constrained minimization problems.     

Polymorphism in alternating polyketones studied by x-ray diffraction and calorimetry

Differential scanning calorimetry and high temperature x-ray diffraction were used to study the perfectly alternating copolymer of ethene and carbon monoxide (polyketone; POKC2). It was found that oriented POK-C2 fibers show a crystalline phase transition at a temperature between 110–125°C with a 10% change in crystalline density. At this temperature, the crystal structure reported recently (POK-α) is transformed to a crystal structure that was reported in the past for room temperature imperfectly alternating polyketone. The latter structure will be designated as POK-β. The influence of chain defects on the crystal structure was studied by synthesizing terpolymers (POK-C2/C3), in which small amounts of propylene-CO units are incorporated into the polymer backbone. The resulting terpolymers differ from the copolymer by the presence of methyl groups randomly distributed along the polyketone backbone chain. Evidence is presented that indicates that the methyl groups are built into the crystal lattice as defects. With more than 5 mole-% propene the terpolymer fibers crystallize exclusively in the β-modification. Below this level the α/β ratio (at room temperature) increases with decreasing amounts of propene. Both as-synthesized and as-spun POK-C2 were found to consist of both POK-α and POK-β; the α/β ratio depends on the method of preparation. Because the drawn POK-C2 fibers studied here consist exclusively of POK-α, the process of spinning and drawing leads to the transformation of unoriented β-rich material into oriented POK-α. © 1995 John Wiley & Sons, Inc.