Cloning and Expression of Functional Full-Length Human Tissue Plasminogen Activator in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

Human tissue plasminogen activator (t-PA) plays a pivotal role in the treatment of acute myocardial infarction, ischemic stroke, and deep vein thrombosis. It has the benefit of generating no adverse effects such as fibrinogen depletion, systemic hemorrhage, and immunologic reactions. Human t-PA is a serine-protease enzyme containing 527 amino acid residues in five structural domains. The correct folding of t-PA requires the correct pairing of 17 disulfide bridges in the molecule. A gene encoding full-length human t-PA was cloned into pPICZαA expression vector downstream of alcohol oxidase promoter and α-mating signal sequence from Saccharomyces cerevisiae and flush with the kex2 cleavage site to express the protein with a native N terminus. The methylotrophic yeast, Pichia pastoris GS115 strain, was transformed with this cassette, and methanol utilizing (mut+) transformants were selected for production and secretion of human t-PA into culture media. SDS–PAGE and Western blot analysis showed the expressed bands of t-PA protein. Zymography test indicated suitable folding and proper function of the expressed recombinant human t-PA in conversion of plasminogen to plasmin and gelatin lysis. Amidolytic activity test showed the amidolytic activity of 1,650 IU/ml. The results of this study concluded that P. pastoris methylotrophic yeast can be a suitable alternative for mammalian and prokaryotic expression systems to produce t-PA.     

Analysis of strained double-lightly doped MOSCNT using NEGF

The effects of uniaxial and torsional strains on the double-lightly doped MOSCNT (DLD-MOSCNT) performances are investigated, using the non-equilibrium Green function (NEGF) formalism in mode space approach. The Hamiltonian of the device is obtained by a tight-binding approximation assuming that only p _z orbitals are contributing in carrier transport. In all simulation processes, one mode with the lowest subband is considered. DLD-MOSCNT has a small band-to-band tunneling and almost eliminates the ambipolar behavior of I _DS–V _GS characteristics because of the band engineering. We use a modified model to demonstrate the strain effects on such a low OFF-current device. The results show that the strain effects mainly depend on the chiral vector and diameter of CNT. The strain causes band gap and carrier velocity changes, which result in variation of ON- or OFF-current. In addition, the subthreshold swing of this device under uniaxial strain is calculated, which is about 61 mV/Dec for 2 % tensile strain in (16,0) and for ?2 % compressive strain in (17,0). Under the uniaxial strain, in the case that the energy band gap increases, the variation of DIBL is very small.     

A novel broadband dispersion compensating square-lattice photonic crystal fiber

In this paper we propose a novel square-lattice photonic crystal fiber (SPCF) for dispersion compensation in a wide range of wavelengths. Perfectly matched layer (PML) is considered for the boundary treatment and an efficient compact two dimensional finite-difference frequency-domain (2-D FDFD) method is employed to model square-lattice photonic crystal fibers (SPCF). It has been shown with selecting appropriate parameters for SPCF it is possible to obtain high negative dispersion coefficient, negative dispersion slope over E to L wavelengths, confinement losses less than 10^?5?dB/m and splice losses less than 3.6 dB. The designed SPCF exhibits a relative dispersion slope (RDS) of 3.543 × 10^?3 nm^?1 which is closely matched to the RDS of conventional single mode fibers.     

Sonochemical syntheses and characterization of nano-sized lead(II) coordination polymer with ligand 1H-1,2,4-triazole-3-carboxylate

Nanoparticles of a two-dimensional coordination polymer, {[Pb(L)(μ_1,1-NCS)(H₂O)]}_n (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the single crystals and nano-sized compound 1 at 400 °C under air atmosphere yields mixture of PbS and Pb₂(SO₄)O nanoparticles. Results show that the size and morphology of the PbS and Pb₂(SO₄)O nanoparticles are dependent upon the particles size of compound 1. A decrease in the particles size of compound 1 leads to a decrease in the particles size of the PbS and Pb₂(SO₄)O.     

Inhibitor effect of sodium benzoate on the corrosion behavior of nanocrystalline pure iron metal in near-neutral aqueous solutions

Nanocrystalline iron coating was produced on carbon steel surface by pulse electrodeposition using citric acid bath. The grain size of a nanocrystalline surface was analyzed by X-ray diffractometry and scanning electron microscopy. The electrochemical behavior of nanocrystalline iron coating in the presence of sodium benzoate was evaluated in 30 mg l^-1 NaCl + 70 mg l^-1 Na₂SO₄ aqueous solution using potentiodynamic polarization curves and electrochemical impedance spectroscopy. The results were compared with that of the coarse-grained iron surface. The thermodynamic properties of the inhibitor adsorption were also determined. The results indicated that corrosion inhibition of sodium benzoate in near-neutral aqueous solution was increased as the grain size of iron was decreased from micro- to nanocrystalline surface. This was reported in terms of excess free energy of nanocrystalline surface.     

Fabrication of polyaniline‐coated halloysite nanotubes by in situ chemical polymerization as a solid‐phase microextraction coating for the analysis of volatile organic compounds in aqueous solutions

We have synthesized an organic–inorganic polyaniline–halloysite nanotube composite by an in situ polymerization method. This nanocomposite is immobilized on a stainless‐steel wire and can be used as a fiber coating for solid‐phase microextraction. It was found that our new solid‐phase microextraction fiber is an excellent adsorbent for the extraction of some volatile organic compounds in aqueous samples in combination with gas chromatography and mass spectrometry. The coating can be prepared easily, is mechanically stable, and exhibits relatively high thermal stability. It is capable of extracting phenolic compounds from water samples. Following thermal desorption, the phenols were quantified by gas chromatography with mass spectrometry. The effects of extraction temperature, extraction time, sample ionic strength, stirring rate, pH, desorption temperature and desorption time were studied. Under optimal conditions, the repeatability for one fiber (n = 5), expressed as the relative standard deviation, is between 6.2 and 9.1%. The detection limits range from 0.005 to 4 ng/mL. The method offers the advantage of being simple to use, with a shorter analysis time, lower cost of equipment and higher thermal stability of the fiber in comparison to conventional methods of analysis.     

Application of sulfur microparticles for solid-phase extraction of polycyclic aromatic hydrocarbons from sea water and wastewater samples

The application of sulfur microparticles as efficient adsorbents for the solid-phase extraction (SPE) and determination of trace amounts of 10 polycyclic aromatic hydrocarbons (PAHs) was investigated in sea water and wastewater samples using high performance liquid chromatography coupled with an ultraviolet detector (HPLC–UV). Parameters influencing the preconcentration of PAHs such as the amount of sulfur, solution flow rate and volume, elution solvent, type and concentration of organic modifier, and salt effect were examined. The results showed that at a flow rate of 10 mL min⁻¹ for the sample solutions (100 mL), the PAHs could be adsorbed on the sulfur microparticles and then eluted by 2.0 mL of acetonitrile. For HPLC–UV analysis of extracted PAHs, the calibration curves were linear in the range of 0.05–80.0 μg L⁻¹; the coefficients of determinations (r²) were between 0.9934 and 0.9995. The relative standard deviations (RSDs) for eight replicates at two concentration levels (0.5 and 4.0 μg L⁻¹) of PAHs were lower than 7.3%, under optimized conditions. The limits of detection (LODs, <!-- no-mfc -->S/N<!-- /no-mfc --> = 3) of the proposed method for the studied PAHs were 0.007–0.048 μg L⁻¹. The recoveries of spiked PAHs (0.5 and 4 μg L⁻¹) in the wastewater and sea water samples ranged from 78% to 108%. The simplicity of experimental procedure, high extraction efficiency, short sample analysis, and using of low cost sorbent demonstrate the potential of this approach for routine trace PAH analysis in water and wastewater samples.     

Optimization of dispersive liquid-liquid microextraction coupled with inductively coupled plasma-optical emission spectrometry with the aid of experimental design for simultaneous determination of heavy metals in natural waters

In this study, dispersive liquid-liquid microextraction (DLLME) combined with inductively coupled plasma optical emission spectrometry (ICP-OES) was developed for simultaneous preconcentration and trace determination of chromium, copper, nickel and zinc in water samples. Sodium diethyldithiocarbamate (Na-DDTC), carbon tetrachloride and methanol were used as chelating agent, extraction solvent and disperser solvent, respectively. The effective parameters of DLLME such as volume of extraction and disperser solvents, pH, concentration of salt and concentration of the chelating agent were studied by a (2^f−1) fractional factorial design to identify the most important parameters and their interactions. The results showed that concentration of salt and volume of disperser solvent had no effect on the extraction efficiency. In the next step, central composite design was used to obtain optimum levels of effective parameters. The optimal conditions were: volume of extraction solvent, 113 μL; concentration of the chelating agent, 540 mg L⁻¹; and pH, 6.70. The linear dynamic range for Cu, Ni and Zn was 1-1000 μg L⁻¹ and for Cr was 1-750 μg L⁻¹. The correlation coefficient (R²) was higher than 0.993. The limits of detection were 0.23-0.55 μg L⁻¹. The relative standard deviations (RSDs, C = 200 μg L⁻¹, n = 7) were in the range of 2.1-3.8%. The method was successfully applied to determination of Cr, Cu, Ni and Zn in the real water samples and satisfactory relative recoveries (90-99%) were achieved.     

Dinuclear copper complexes of pyridylphenylphosphine ligands: Characterization of a mixed-valence Cu/Cu dimer

Homo bi-copper complexes [Cu₂{PhP(2-py)₂}₂(NO₃)₃] (1) and [Cu₂{P(2-py)₃}₂Cl₂] (2), were synthesized from the reaction of Cu(NO₃)₂·3H₂O and CuCl₂·2H₂O with their corresponding 2-pyridylphosphine ligands. Compound 1 has a mixed valence Cu(I)-Cu(II) core with electron acceptor phosphine atoms and two NO₃⁻ anions coordinated in a monodentate fashion to Cu(I), giving it a distorted tetrahedral geometry. The environment of Cu(II) in 1 is composed of four nitrogen atoms from pyridyl and another NO₃⁻ anion in a square pyramidal geometry. This complex shows luminescence and a low energy absorption band at 969 nm corresponding to intermetallic electron transfer between the copper centers. Complex 2 was prepared from the treatment of copper(II) chloride with tris(2-pyridyl)phosphine, producing a binuclear copper complex which possesses a crystallographic inversion center. The copper geometry in this complex is distorted tetrahedral with coordination of one Cl⁻, two nitrogens from one bridging tris(2-pyridyl)phosphine ligand and one P atom from the other bridging tris(2-pyridyl)phosphine ligand, in a similar way observed in related complexes. The products have been characterized by spectroscopic methods and also by the single-crystal X-ray diffraction method.