A comprehensive Monte Carlo simulation of styrene atom transfer radical polymerization

<正>An optimized and high-performance Monte Carlo simulation is developed to take thorough account of four different cases of termination in styrene ATRP.According to the simulation results,the bimolecular termination rate constant sharply drops throughout the polymerization when either chain-length dependency of termination rate constant,gel effect,or both together is applied to the simulation.In addition,as expected,the initiator is quickly decomposed at the early stages of the polymerization.The concentration of the catalyst in lower oxidation state decreases at first and then plateaus at higher conversion;furthermore,the steady concentration of M_t~nY/L in the polymerization is the highest when the chain-length-dependent diffusion-controlled termination rate constant is employed in the simulation.The rates of deactivation and chain end degradation reactions are also smaller in this case.Therefore,the fraction of dormant chains is higher throughout the reaction and consequently the portion of dead polymers decreases.Besides,molecular weight increases linearly with conversion;however,when neither gel effect nor chain-length dependency of termination rate constant is considered,the molecular weight deviates from linearity at the end of the reaction.The peak of chain length distribution shifts toward higher molecular weight too during the reaction.Finally,the molecular weight distribution broadens at higher conversion;however, the chain length distribution of polymers produced under conditions of applying chain-length-dependent diffusion-controlled termination rate constant is narrower.     

Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells

Establishing the 3D microscale organization of cells has numerous practical applications, such as in determining cell fate (e.g., proliferation, migration, differentiation, and apoptosis) and in making functional tissue constructs. One approach to spatially pattern cells is by dielectrophoresis (DEP). DEP has characteristics that are important for cell manipulation, such as high accuracy, speed, scalability, and the ability to handle both adherent and non-adherent cells. However, widespread application of this method is largely restricted because there is a limited number of suitable hydrogels for cell encapsulation. To date, polyethylene glycol-diacrylate (PEG-DA) and agarose have been used extensively for dielectric patterning of cells. In this study, we propose gelatin methacrylate (GelMA) as a promising hydrogel for use in cell dielectropatterning because of its biocompatibility and low viscosity. Compared to PEG hydrogels, GelMA hydrogels showed superior performance when making cell patterns for myoblast (C2C12) and endothelial (HUVEC) cells as well as in maintaining cell viability and growth. We also developed a simple and robust protocol for co-culture of these cells. Combined application of the GelMA hydrogels and the DEP technique is suitable for creating highly complex microscale tissues with important applications in fundamental cell biology and regenerative medicine in a rapid, accurate, and scalable manner.     

Activity Coefficient Determinations of KCl in the KCl + Formamide + Water Mixed Solvent System Based on Potentiometric Measurements at 298.2 K

In this work mean activity coefficient measurements for KCl in the KCl + formamide + water system, using the potentiometric method, are reported. The electromotive force measurements were performed on a galvanic cell of the type Ag | AgCl | KCl (m), formamide (w%), H₂O (1−w)% | K-ISE, in solvent mixtures containing w=(0,10,20,30, and 40)% mass percent of formamide over ionic strengths ranging from 0.0010 to 3.9578 mol⋅kg⁻¹. Modeling of the activity coefficients of this ternary system was based on an extended Debye–Hückel equation and the Pitzer ion-interaction model. The resulting values of the mean activity coefficients, the osmotic coefficients and the excess Gibbs energy, together with Pitzer ion-interaction parameters (β ⁽⁰⁾, β ⁽¹⁾ and C ^ϕ ) and Debye–Hückel parameters (a, c and d), are reported for the investigated system.     

Synthesis and characterization of ZnO nanowires by thermal oxidation of Zn thin films at various temperatures

In this research high-quality zinc oxide (ZnO) nanowires have been synthesized by thermal oxidation of metallic Zn thin films. Metallic Zn films with thicknesses of 250 nm have been deposited on a glass substrate by the PVD technique. The deposited zinc thin films were oxidized in air at various temperatures ranging between 450 °C to 650 °C. Surface morphology, structural and optical properties of the ZnO nanowires were examined by scanning electron microscope (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) and photoluminescence (PL) measurements. XRD analysis demonstrated that the ZnO nanowires has a wurtzite structure with orientation of (002), and the nanowires prepared at 600 °C has a better crystalline quality than samples prepared at other temperatures. SEM results indicate that by increasing the oxidation temperature, the dimensions of the ZnO nanowires increase. The optimum temperature for synthesizing high density, ZnO nanowires was determined to be 600 °C. EDX results revealed that only Zn and O are present in the samples, indicating a pure ZnO composition. The PL spectra of as-synthesized nanowires exhibited a strong UV emission and a relatively weak green emission.     

A miniature gas analyzer made by integrating a chemoresistor with a microchannel

A microfluidic channel is integrated with a tin oxide-based generic gas sensor on a PMMA (polymethyl methacrylate) substrate to fabricate a miniature gas analyzer. The analyte gas diffuses along the air-filled channel to affect the sensor installed in a microcavity positioned at the end of the channel. Analyte diffusion rates, experimentally estimated based on the temporal responses received from the sensor, are connected to the analyte's interactions with the channel walls as well as its diffusivity in air. The analyte-related information is extracted from the recorded responses and used for analyte recognition. A single PMMA channel of 80 μm × 3 mm × 50 mm dimensions facilitates the correct classification of single component contaminants each introduced in a wide concentration range in air. The device is also shown to identify 15 ppm of 2-butanol in air contaminated with 1500 ppm of 1-butanol. The gas analyzer fabricated based on this concept is durable, inexpensive, handheld and suitable for a variety of applications.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Ru-catalyzed synthesis of substituted phthalides through C–H bond activation and functionalization

Synthesis of substituted phthalides through a ruthenium-catalyzed reaction of phthalic anhydrides with acrylates is described. The reaction proceeds via CH bond activation and leads to the formation of vinylated phthalides through a successive double vinylation accompanied by decarboxylation and annulation reactions.     

Solubility Data of Diazepam in Binary and Ternary Mixtures of PEGs 200 and 400 with N-Methyl Pyrrolidone and Water at 298.2 K: Experimental Data and Modeling

Experimental solubilities of diazepam in binary and ternary solvents of polyethylene glycols 200 and 400 with N-methyl pyrrolidone and water at T = 298.2 K are reported. The Jouyban–Acree model was used to fit solubility data of diazepam in the binary and ternary solvent mixtures (106 data points) in which the overall mean relative deviations (OMRD %) is 13.1 % and the prediction OMRD % is 31.7 %. The combined version of the Jouyban–Acree model with Hansen solubility parameters was used for fitting and predicting the solubility data and the OMRDs % are 10.0 and 20.8 %, respectively. Also, the previously proposed trained versions of the Jouyban–Acree model were used for predicting the reported data in this work and all results are listed in the tables. The density of the solute-free solvent mixtures were measured and employed to calculate the constants of the Jouyban–Acree model and then the densities of the saturated solutions were predicted.     

Regioselective Synthesis of Para‐Bromo Aromatic Compounds

Reaction of substituted benzene rings with N‐bromophthalimide, under neutral conditions, gave the corresponding bromo derivatives with a preference for the formation of the para bromo isomer over the ortho isomer. The simple work‐up procedure minimizes loss of product and the yields are good.