Near-IR photoluminescence from Si/Ge nanowire-grown silicon wafers: effect of HF treatment

We present the room-temperature near-infrared (NIR) photoluminescence (PL) properties of Si/Ge nanowire (NW)-grown silicon wafers which were treated by vapor of HF:HNO₃ chemical mixture. This treatment activates or enhances the PL intensity in the NIR region ranging from 1000 nm to 1800 nm. The PL consists of a silicon band-edge emission and a broad composite band which is centered at around 1400–1600 nm. The treatment modifies the wafer surface particularly at defect sites especially pits around NWs and NW surfaces by etching and oxidation of Si and Ge. This process can induce spatial confinement of carriers where band-to-band (BB) emission is the dominant property in Si-capped strained Si/Ge NW-grown wafers. Strong signals were observed at sub-band-gap energies in Ge-capped Si/Ge NW-grown wafers. It was found that NIR PL is a competitive property between the Si BB transition and deep-level emission, which is mainly attributable to Si-related defects, Ge dots and strained Ge layers. The enhancement in BB and deep-level PL is discussed in terms of strain, oxygen-related defects, dot formation and carrier-confinement effects. The results demonstrate the effectiveness of this method in enhancing and tuning NIR PL properties for possible applications.     

Chiral carborane-derived thiophosphites: A new generation of ligands for Rh-catalyzed asymmetric hydrogenation

A new class of chiral monodentate ligands - carborane-containing thiophosphites have been synthesized and tested in the Rh-catalyzed asymmetric hydrogenation of prochiral olefins with the result of up to 99% ee. The dependence of the enantioselectivity on the electronic properties of the carboranyl substituent has been studied.     

Synthesis and immobilization of molecular switches onto titaniumdioxide nanowires

The precursor [Fe^III(L)Cl (L = N,N′-bis(2′-hydroxy-3′-methyl-benzyliden)-1,7-diamino-4-azaheptane) is combined with [Mo(CN)₈]^4? yields a star shaped nona-nuclear cluster, [Mo^IV{(CN)Fe^III(L)}₈]Cl₄. This Fe₈Mo molecule is a high-spin system at room temperature. On cooling to 20 K some of the iron(III) centres in the molybdenum(IV)-star switch to the low-spin state as proven by Mössbauer spectroscopy. This molecule was deposited on TiO₂ nanowires by electrostatic interactions between the cluster cations and the surface functionalized titanium oxide nanowire. The synthesis and surface binding of the multistable molecular switch was demonstrated using IR and UV–Vis spectroscopy (high-resolution) transmission electron microscopy ((HR)TEM) and Mössbauer spectroscopy. High- and low-temperature Mössbauer spectra indicate that the spin state transition of the free cluster molecules is preserved after surface binding. The above results emphasize the possibility of fabricating molecule-based low-dimensional structures by using traditional bottom-up approaches based on the electrostatic interaction between the cluster cations and polymer functionalized nanowires. These results can be generalized for the application to both charged and non-charged molecules.     

Spectroscopic Properties of Amine‐substituted Analogues of Firefly Luciferin and Oxyluciferin

Spectroscopic and photophysical properties of firefly luciferin and oxyluciferin analogues with an amine substituent (NH₂, NHMe and NMe₂) at the C6' position were studied based on absorption and fluorescence measurements. Their π‐electronic properties were investigated by DFT and TD‐DFT calculations. These compounds showed fluorescence solvatochromism with good quantum yields. An increase in the electron‐donating strength of the substituent led to the bathochromic shift of the fluorescence maximum. The fluorescence maxima of the luciferin analogues and the corresponding oxyluciferin analogues in a solvent were well correlated with each other. Based on the obtained data, the polarity of a luciferase active site was explained. As a result, the maximum wavelength of bioluminescence for a luciferin analogue was readily predicted by measuring the photoluminescence of the luciferin analogue in place of that of the corresponding oxyluciferin analogue.     

Methyl methacrylate particles with amino groups on the surface: Colloid stability and sorption of biologically active substances

The present article investigates the influence of dispersion medium on the aggregate stability of cross-linked poly-(methyl methacrylate) particles on the surface layer of which aliphatic amino groups are localized. It is shown that particle size depends on the ionic strength of dispersion medium. The research determines the optimal content of cross-linked agent, ethylene glycol dimetharylate that results in the formation of cationic particles being stable in saline. Particle modification is performed by bovine serum albumin and luminophore fluorescein 5(6)-isothiocyanate. Protein sorption is observed not to influence luminescent properties of the particles. It is also determined that due to the aggregate stability of particles obtained from 5?wt% of ethylene glycol dimethacrylate in saline, the monodispersity and the absence of inversion of zeta potential in wide pH range is retained, such particles may be considered as perspective carriers of biologically active substances.     

Biomimetic membranes with aqueous nano channels but without proteins: impedance of impregnated cellulose ester filters

Earlier we have shown that many important properties of ionic aqueous channels in biological membranes can be imitated using simple biomimetic membranes. These membranes are composed of mixed cellulose ester-based filters, impregnated with isopropyl myristate or other esters of fatty acids, and can be used for high-throughput drug screening. If the membrane separates two aqueous solutions, combination of relatively hydrophilic polymer support with immobilized carboxylic groups results in the formation of thin aqueous layers covering inner surface of the pores, while the pore volume is filled by lipid-like substances. Because of these aqueous layers biomimetic membranes even without proteins have a cation/anion ion selectivity and specific (per unit of thickness) electrical properties, which are similar to typical properties of biological membranes. Here we describe frequency-dependent impedance of the isopropyl myristate-impregnated biomimetic membranes in the 4-electrode arrangement and present the results as Bode and Nyquist diagrams. When the membranes are placed in deionized water, it is possible to observe three different dispersion processes in the frequency range 0.1 Hz to 30 kHz. Only one dispersion is observed in 5 mM KH(2)PO(4) solution. It is suggested that these three dispersion features are determined by (a) conductivity in aqueous structures/channels, formed near the internal walls of the filter pores at high frequencies, (b) dielectric properties of the whole membrane at medium frequencies, determined by polymer support, aqueous layers and impregnating oil, and, finally, (c) by the processes in hydrated liquid crystal structures formed in pores by impregnating oil in contact with water at low frequencies.     

Isomorphous substitutions of rare earth elements for calcium in synthetic hydroxyapatites

Polycrystalline hydroxyapatites Ca(10-x)REE(x)(PO(4))(6)(OH)(2-x)O(x) were synthesized and studied by X-ray powder diffraction, infrared absorption, diffuse-reflectance spectroscopy, and thermogravimetry. The solubility limits x(max) of rare earth elements (REE) in Ca hydroxyapatites decreases with an increasing REE atomic number from x(max) = 2.00 for La, Pr, and Nd to x(max) = 0.20 for Yb at 1100 °C. Refinements of X-ray diffraction patterns by the Rietveld method show that REE atoms substitute for Ca preferentially at the Ca(2) sites of the apatite structure. The substitution decreases the Ca(2)-O(4) atomic distances in the calcium coordination polyhedra and increases the Ca(2)-O(1,2,3) distances. This observation shows that interatomic distances depend not only on radii of the ions involved in the substitution but also on their charges.     

Push-pull nitrile ligands exhibit specific hydration patterns

The reaction between K[PtCl(3)(Me(2)SO)] or prepared in this work cis- and trans-[PtCl(2)(NCNR(2))(Me(2)SO)] (R(2) = Me(2), 1; C(4)H(8)O, 2; C(5)H(10) 3) with an excess of NCNR(2) in water gives the cationic bischelate [Pt{κ(2)-N,N'-NH=C(NMe(2))OC(NMe(2))=NH}(2)](2+) (4(2+)) and the monochelates [PtCl{κ(2)-N,O-NH=C(NR(2))NC(NR(2))=O}(Me(2)SO)] (R(2) = C(4)H(8)O, 5; C(5)H(10), 6). Complex 4(2+) was released from the reaction mixture as 4·[PtCl(3)(Me(2)SO)](2)·(H(2)O)(2) or it was precipitated as 4·[A](2) (A = pic, 4·[pic](2); PF(6), 4·[PF(6)](2); BPh(4), 4·[BPh(4)](2)·(NH(2)CONMe(2))) by addition of picric acid, NaPF(6), or NaBPh(4), respectively, to the filtrate obtained after separation of 4·[PtCl(3)(Me(2)SO)](2)·(H(2)O)(2). In 2, the dialkylcyanamide ligand undergoes bond cleavage giving the known trans-[PtCl(2){N(H)C(4)H(8)O}(Me(2)SO)] (trans-7). All complexes were characterized by elemental analyses (C, H, N), high resolution ESI-MS, IR, (1)H and (13)C{(1)H} NMR spectroscopic techniques, including 2D NMR correlation experiments ((1)H,(1)H-COSY, (1)H,(13)C-HMQC/(1)H,(13)C HSQC, (1)H,(13)C-HMBC, and (1)H,(1)H-NOESY). The structures of cis-1, cis-3, 4·[PtCl(3)(Me(2)SO)](2)·(H(2)O)(2), 4·[BPh(4)](2)·(NH(2)CONMe(2)) and 5 were determined by a single-crystal X-ray diffraction.     

Investigation of the mechanism of protein adsorption on ordered mesoporous silica using flow microcalorimetry

The adsorption of bovine serum albumin (BSA) and lysozyme (LYS) on siliceous SBA-15 with 24 nm pores was studied using flow microcalorimetry; this is the first attempt to understand the thermodynamics of protein adsorption on SBA-15 using flow microcalorimetry. The adsorption mechanism is a strong function of protein structure. Exothermic events were observed when protein–surface interactions were attractive. Entropy-driven endothermic events were also observed in some cases, resulting from lateral protein–protein interactions and conformational changes in the adsorbed protein. The magnitudes of the enthalpies of adsorption for primary protein–surface interactions decrease with increased surface coverage, indicating the possibility of increased repulsion between adsorbed protein molecules. Secondary exothermic events were observed for BSA adsorption, presumably due to secondary adsorption made possible by conformational changes in the soft BSA protein. These secondary adsorption events were not observed for lysozyme, which is structurally robust. The results of this study emphasize the influence of solution conditions and protein structure on conformational changes of the adsorbed protein and the value of calorimetry in understanding protein–surface interactions.