Diels-Alder chemistry on alkene functionalized films

A substrate-independent method has been devised for ring formation at solid surfaces. This entails the aminolysis reaction of allylamine with maleic anhydride pulsed plasma polymer films to yield terminal alkene groups at the surface. Subsequent exposure to 1,3-cyclohexadiene leads to a Diels-Alder type (4 + 2) cycloaddition reaction to give a mixture of endo- and exo-bicyclo[2.2.2]oct-2-ene rings.     

Some trends in the development of microplasmas for spectrochemical analysis

The development of microplasmas for spectrochemical analysis by optical methods is discussed. Recent achievements in miniaturization are highlighted, especially for three types of plasmas, namely high-frequency plasmas, dc-discharges and microwave plasmas. The potentials of each of these groups of plasmas as sources for atomic emission spectrometry are discussed. Literature citations and experiments indicate that the plasmas are also very useful as atom reservoirs for atomic absorption spectrometry. Methods of sampling, including feeding with gas chromatography effluents, the use of electrothermal vaporization, and the evolution of gaseous species (as shown for the case of Hg vapor), are discussed as prominent interfaces to make use of these sources for elemental analysis.     

Surface plasmon resonance study of the interaction of a beta-cyclodextrin polymer and hydrophobically modified poly(N-isopropylacrylamide)

Surface plasmon resonance (SPR) technique is used to follow, both in real time and in situ, the association between a physically adsorbed polymer of beta-cyclodextrin (pbetaCD) and different hydrophobically modified poly(N-isopropylacrylamide) (PNIPAM) copolymers containing either adamantyl or dodecyl groups. This association is due to the complex formation between the hydrophobic groups and the betaCD cavities. Therefore, the adsorbed amount of PNIPAM onto the pbetaCD layer depends on the substituent and on its substitution level. The association and dissociation rate constants are evaluated from the kinetics of PNIPAM adsorption. An estimation of the association constants leads to values higher than 10(4) M(-1), reflecting the strong interaction between these polymers.     

可溶性汞化苯乙烯－丙烯酸甲酯共聚物的合成

用自由基溶液降合方法制备一系列苯乙烯－丙烯酸甲酯线型共聚物，用核磁共振测定了苯基在共聚物中的百分比，在该共聚物的四氢呋喃溶液中，用三氟乙酸汞在共聚物的苯环上进行亲电取代反应，得到可溶性汞化共聚物，由于这类泵化共的可溶于四氢呋喃，二氯甲烷等溶剂，用重沉淀法多次提纯，得到了纯度很高，溶解性较好的含重金属二价汞的共聚物，用红外光谱仪测定共聚物上的汞基团，用原子吸收定量测试共聚中的汞的百分聚代率，结果表明     

Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Direct quantitative determination of surface Brønsted acidity of solids by H/D exchange using D2O

A highly flexible method for direct and quantitative determination of surface Br?nsted acidity of solids in terms of number, type and strength of the acid sites based on quantitative H/D exchange kinetics between the acid solid and gaseous D2O has been developed and applied to materials covering the whole range of acidity.     

Experimental designs and response surface modeling applied for the optimization of metal-cyanide complexes analysis by capillary electrophoresis

The development of capillary zone electrophoresis (CZE) methods for the determination of metal cyanide complexes in real samples showed some problems, such as the low detection signal of Au (CN)2- and the low resolution between Ni(II) and Fe(II) cyanides in gold processing solutions, and the lack of separation of Pt(CN)4(2-) and Pd(CN)4(2-) in the leachates from automobile catalytic converters. To optimize some analytical parameters, the present study thus focused on the application of experimental designs and multiregression models. The following factors were examined by a two-level factorial design: applied voltage, injection time, detection wavelength, buffer ion, ionic strength and buffer modifiers. For optimization of the CZE method, subsequent response-surface experiments with the important factors were made with the two kinds of leaching solutions. Optimal analytical conditions were obtained in each case, giving good detection signals and resolution for the components of the studied leachates.     

Formation of a tetranuclear copper (II) cluster assembled by metal-assisted hydrolysis and desulfurization of bis(3,5-dimethylpyrazolyl)methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2

The reaction of methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2, 1, with anhydrous CuCl2 affords a tetranuclear copper cluster[Cu2Cl2(3,5-Me2Pz)3(MePO3)]2, 2, and a dinuclear compound Cu2Cl4(3,5-Me2Pz)4, 3. This reaction involves a metal-assisted desulfurization along with concomitant hydrolysis of P-N bonds. The X-ray structures of 1-3 have been determined, and the crystal parameters for these are the following. 1: space group = C2/c, a = 15.2552(1) A, b = 8.7364(2) A, c = 21.4490(3) A, beta = 93.349(1) degrees, V = 2853.74(8) A3, and Z = 8. 2: space group = P2(1)/n, a = 12.5964(4) A, b = 15.7773(4) A, c = 13.9781(4) A, beta = 116.6280(10) degrees, V = 2483.32(12) A3, and Z = 2. 3: space group = P2(1)/c, a = 8.7137(8) A, b = 13.5493(14) A, c = 11.8847(12) A, beta = 106.179(2) degrees, V = 1347.6(2) A3, and Z = 2. The structure of 2 shows that it comprises two dinuclear copper cores bridged together by two tripodal methylphosphinate, MePO3, ligands. 2 is weakly antiferromagnetically coupled, as revealed by variable temperature magnetic susceptibility measurements.     

Aerosol formation and reaction pathways of atmospheric oxidation of dimethylsulfide

This paper concerns with three series of experiments about dimethylsulfide gas phase oxidation, carried out at increasing NOx level (< 20 ppb, 1 ppm, 10 ppm) to show the relation between the amounts of nitrogen oxides and the molar yields of sulfur containing products. DMSO, DMSO2, HCHO, HCOOH and SO2 were found as main reaction products. From these experiments and from preceding studies, a sensitive decrease in the quantity of total sulfur products in aerosol phase is underlined. This result derives from the reaction of NOx with CH3S(O)O2 and CH3S(O)OO radicals, which leads to stable intermediates as methylsulphonylperoxynitrate, MSPN, with a characteristic PAN-like structure.