Steps, ledges and kinks on the surfaces of platinum nanoparticles of different shapes

Platinum nanoparticles with a high percentage of cubic-, tetrahedral- and octahedral-like shapes, respectively, have been synthesized by a shape-controlling technique that we developed recently [Ahmadi et al., Science 272 (June 1996) 1924]. High resolution transmission electron microscopy (HRTEM) is used here to directly image the atomic scale structures of the surfaces of these particles with different shapes. The truncated shapes of these particles are mainly defined by the {100}, {111}, and {110} facets, on which numerous atom-high surface steps, ledges and kinds have been observed. This atomic-scale fine structure of the surfaces of these particles is expected to play a critical role in their catalytic activity and selectivity.     

Electrical properties of a solid polymeric electrolyte of PVC–ZnO–LiClO4

The ZnO filler has been introduced into a solid polymeric electrolyte of polyvinyl chloride (PVC)–ZnO–LiClO₄, replacing costly organic filler for conductivity improvement. Ionic conductivity of PVC–ZnO–LiClO₄ as a function of ZnO concentration and temperature has been studied. The electrolyte samples were prepared by solution casting technique. The ionic conductivity was measured using impedance spectroscopy technique. It was observed that the conductivity of the electrolyte varies with ZnO concentration and temperature. The temperature dependence on the conductivity of electrolyte was modelled by Arrhenius and Vogel–Tammann–Fulcher equations, respectively. The temperature dependence on the conductivity does not fit in both models. The highest room temperature conductivity of the electrolyte of 3.7 × 10⁻⁷ Scm⁻¹ was obtained at 20% by weight of ZnO and that without ZnO filler was found to be 8.8 × 10⁻¹⁰ Scm⁻¹. The conductivity has been improved by 420 times when the ZnO filler was introduced into the PVC–LiClO₄ electrolyte system. It was also found that the glass transition temperature of the electrolyte PVC–ZnO–LiClO₄ is about the same as PVC–LiClO₄. The increase in conductivity of the electrolyte with the ZnO filler was explained in terms of its surface morphology.     

Generation of dark hollow beam by use of phase-only filtering

A simple but effective scheme to generate dark hollow beams is proposed by use of phase-only filtering and optical Fourier transform. A Gaussian beam of fundamental mode is modulated by a pre-designed phase mask, which is a piecewise modification of an axicon lens, and followed by a Fourier transform to generate an ideal dark hollow beam at the focal plane. This method has an advantage that the total energy of the beam is conserved under paraxial approximation. Numerical calculations are provided to show the validity of the proposed scheme.     

Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

XRD, conductivity and FTIR studies on LiI-Li2WO4-Li3PO4 prepared by low temperature sintering

Different amounts of Li₃PO₄ were mixed to a fixed ratio of LiI:Li₂WO₄, ground and pelletised before subjected to sintering at 70°C for 7 days. XRD shows that the product formed after sintering process is most likely Li₆P₄W₈O₃₂ due to peaks present at 10.6°, 22.4°, 24.0°, 24.4, 26.2°, 32.4° and 34.0°. Conductivity studies show that the sample with 25 wt.% Li₃PO₄ exhibits the highest room temperature conductivity of 3.42×10⁻³ Scm⁻¹. Conductivity is expected to occur through channel-like structures which could have formed due to corner or edge sharing of polyhedra. FTIR studies have shown the existence of WO₄ tetrahedra and WO₆ octahedral at 850 cm⁻¹ and 952 cm⁻¹, and phosphate tetrahedral at 564 cm⁻¹, 700 cm⁻¹, 890 cm⁻¹ and 1030 cm⁻¹.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.     

Computational studies of vibrational spectra and molecular properties of 6-methyluracil using HF, DFT and MP2 methods

Theoretical investigations of atomic charges, conformers, frontier molecular orbitals, molecular geometries, thermodynamic properties, hyperpolarizabilities and harmonic vibrational frequencies of 6-methyluracil (6MU) have been carried out using ab initio Hartree-Fock (HF), density functional theory (DFT) and second order M?ller-Plesset (MP2) methods. All calculations were performed using the GAMESS-US program package with the basis sets 6-31G(d,p) and 6-311G(d,p). FT-IR and Raman spectra of 6MU were recorded in the regions 50–4000 cm⁻¹ and 60–4000 cm⁻¹ respectively. Optimized geometries were obtained using the global optimization procedure. The calculated structural parameters for two conformers of 6MU have been compared with experimentally observed values. The energy barrier (ΔE=ELUMO-EHOMO) between the HOMO and LUMO is predicted on the basis of theoretical calculations. The simulated TD-DFT spectrum has been compared with experimental electronic spectrum for 6MU. The calculated potential energy distribution (PED) values have been utilized to perform vibrational assignment of the infrared and Raman spectra.     

The strength of octupole correlations in neutron-rich Xe isotopes

Excited levels in ¹⁴⁰Xe and ¹⁴²Xe nuclei, populated in the spontaneous fission of ²⁴⁸Cm, were studied by means of prompt γ-ray spectroscopy, using EUROGAM2 array. We report the first observation of an octupole band in ¹⁴²Xe and extend the octupole band in ¹⁴⁰Xe. Level schemes of ¹⁴⁰Xe and ¹⁴²Xe obtained in this work show patterns characteristic of ocupole-vibrational bands. Properties of octupole bands in Xe isotopes indicate that octupole correlations in these nuclei are lower than in the corresponding Ba nuclei. The electric dipole moment of ¹⁴²Xe was found to be larger than in other Xe isotopes, contrary to theoretical predictions. This may be due to the special role of the N = 88 neutron number. Received: 18 November 2002 / Accepted: 15 December 2002 / Published online: 25 February 2003 RID="a" ID="a"e-mail: urban@fuw.edu.pl Communicated by D. Schwalm