Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

Beiträge zur Chemie der Silicium—Stickstoff-Verbindungen, 16. Mitt.: N-Silyl-carbonamide und N-Silyl-carbamidsäureester

Zusammenfassung Die durch direkte Silylierung von Carbonamidgruppen mit Halogensilanen nicht zugänglichen Verbindungen der Gruppierung R-CONHSiR₃ konnten durch Umsetzung von Säureamiden oder Säurechloriden mit Hexamethyldisilazan gewonnen werden. So wurden Derivate mit R=CH₃, C₂H₅, C₆H₅, CONHSiR₃ , OCH₃, OC₂H₅, OCH(CH₃)₂; R=CH₃ (vgl. Tab. 1) dargestellt und in ihren physikalischen und chemischen Eigenschaften näher studiert.Herrn Prof. Dr.A. Zinke zum 70. Geburtstag gewidmet.15. Mitt.:U. Wannagat undH. Kuckertz, Angew. Chem.74, 117 (1962).Auszug aus der DissertationJ. Pump, Techn. Hochsch. Aachen 1962.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Determination of hexacyanoferrate based on its catalytic influence on the oxidation of p-phenylenediamines by iron(III)

Summary Both hexacyanoferrate(III) and hexacyanoferrate(II) catalyze the oxidation of p-phenylenediamines by iron(III)_aq. The rate of this reaction in the presence of a sample with an unknown amount of hexacyanoferrate is compared with the reaction rate of solutions containing well defined concentrations of this substance. In this way, hexacyanoferrate can be determined photometrically down to <10^–9 mol/l. Although this procedure is very sensitive, the analysis can be performed with a simple photometer. Absorbance changes >0.2 can easily be obtained in 1 cm cuvettes, even at extremely small concentrations of hexacyanoferrate, because it is not an absorbance proportional to the concentration of hexacyanoferrate but rather the formation rate of p-semiquinonediimine which enables the quantitative determination of hexacyanoferrate.     

Structural basis for the highly selective inhibition of MMP-13

Inhibitors for matrix metalloproteinases (MMPs) are under investigation for the treatment of cancer, arthritis, and cardiovascular disease. Here, we report a class of highly selective MMP-13 inhibitors (pyrimidine dicarboxamides) that exhibit no detectable activity against other MMPs. The high-resolution X-ray structures of three molecules of this series bound to MMP-13 reveal a novel binding mode characterized by the absence of interactions between the inhibitors and the catalytic zinc. The inhibitors bind in the S1' pocket and extend into an additional S1' side pocket, which is unique to MMP-13. We analyze the determinants for selectivity and describe the rational design of improved compounds with low nanomolar affinity.     

Übergangsmetall-silyl-komplexe: IV. Bildung eines ring-substituierten wolframocen dihydrid derivats durch reaktion von Cp2WCl2 MIT Li[Si(SiMe3)3]

In the reaction of Cp₂WGl₂ with Li[Si(SiMe₃)₃] the dihydrid tungstenocene derivative [(Me₃Si)₃SiC₅H₄]WH₂ (3) is formed with a 56% yield. 3 crystallizes in space group P$\text{1}$, with a 918.0(4), b 1580.9(4), c 1621.2(7) pm, α 117.63(2), β 89.95(3), γ 94.39(3)° at ?40° C. The dihedral angle between the Cp planes is 140.9°.     

A novel group of alkaline earth metal amides: syntheses and characterization of M[N(2,6-(i)Pr(2)C(6)H(3))(SiMe(3))](2)(THF)(2) (M = Mg,Ca, Sr,Ba) and the linear,two-coordinate Mg[N(2,6-(i)Pr(2)C(6)H(3))(SiMe(3))](2)

Novel alkaline earth metal aryl-substituted silylamides were prepared using alkane (Mg) and salt elimination reactions (Mg, Ca, Sr, and Ba). The salt elimination regime involved the treatment of the alkaline earth metal iodides with 2 equiv of the respective potassium amide KNDiip(SiMe(3)), (Diip = 2,6-i-Pr(2)C(6)H(3)). The organomagnesium source for the alkane elimination was ((n)()Bu/(s)()Bu)(2)Mg. All compounds were characterized using (1)H, (13)C NMR, and IR spectroscopy, in addition to X-ray crystallography (except Mg[NDiip(SiMe(3))](2)THF(2)). Crystal data with Mo Kalpha (lambda = 0.710 73 A) are as follows: Mg[NDiip(SiMe(3))](2), 1, a = 9.4687(6) A, b = 9.6818(6) A, c = 17.9296(1) A, alpha = 96.487(1) degrees, beta = 94.537(1) degrees, gamma = 89.222(1) degrees, V = 1608.8(2) A(3), Z = 2 (two independent molecules), triclinic, space group P(-)1, R1 (all data) = 0.0508; (n)()BuMg[NDiip(SiMe(3))]THF(2), 2, a = 9.5413(1) A, b = 16.493(2) A, c = 9.8218(1) A, beta = 108.149(2) degrees, V = 1468.7(4) A(3), Z = 2, monoclinic, space group P2(1), R1(all data) = 0.1232; Ca[NDiip(SiMe(3))](2)THF(2), 4, a = 9.7074(1) A, b = 20.9466(4) A, c = 21.6242(3) A, alpha = 73.573(1) degrees, beta = 78.632(1) degrees, gamma = 89.621(1) degrees, V = 4129.1(1) A(3), Z = 4 (two independent molecules), triclinic, space group P(-)1, R1 (all data) = 0.0902; Sr[NDiip(SiMe(3))](2)THF(2), 5, a = 20.5874(5) A, b = 9.8785(2) A, c = 20.8522(5) A, beta = 102.035(2) degrees, V = 4147.6(2) A(3), Z = 4 (two independent molecules), monoclinic, space group P2/n, R1 (all data) = 0.0756; Ba[NDiip(SiMe(3))](2)THF(2), 6, a = 20.5476(2) A, b = 10.0353(2) A, c = 20.9020(4) A, beta = 101.657(1) degrees, V = 4221.0(1) A(3), Z = 4 (two independent molecules), monoclinic, space group P2/n, R1 (all data) = 0.0573.     

Mehrfachbindungen zwischen hauptgruppenelementen und übergangsmetallen: VII. Oxidative decarbonylierungsprozessein der photochemie von tricarbonyl(η5-pentamethylcyclopentadienyl)rhenium: Neue oxo—rhenium-komplexe

Short-wavelength photolysis of tricarbonyl(η⁵-pentamethylcyclopentadienyl)rhenium (1) (λ < 300 nm, quartz-glass) in tetrahydrofuran yields under partial or complete decarbonylation three novel organorhenium compounds, with the relative yields depending upon the irradiation time. Formed by exhaustive oxidative decarbonylation, the complex trioxo(η⁵-pentamethylcyclopentadienyl)rhenium(VII) (5) represents the first example of the new class of oxo half-sandwich complexes. The derivatives (μ-O)[(η⁵-C₅Me₅)Re(CO)₂]₂ (2; Me = CH₃) and (η⁵-C₅Me₅)₂Re₂(CO)₂O₂ (3; Me = CH₃) containing both oxo and carbonyl ligands are formed from 1 at shorter irradiation times. Both compounds are isolable intermediates along the mechanistically not yet fully established sequence 1 → → 5 as they are degraded to 5 under CO₂ elimination in the presence of air and/or light. The mixed oxo carbonyl complex 2 has been characterized by means of single-crystal X-ray diffraction techniques (triclinic, space group P$\text{1}$-C_i¹; a 907.4(2), b 1040.2(3), c 1414.3(4) pm; α 79.99(2), β 88.42(2), γ 66.18(2)°; R_iso = 0.068, R_aniso = 0.037, R_w = 0.031). The molecular structure centres around an isosceles Re₂O triangle whose metal centres exhibit a strongly distorted square-pyramidal geometry; the metal-metal distance recorded at 281.7(1) pm is in agreement with a single bond by the EAN rule. The centrically coordinated, planar five-membered ring ligands are parallel to each other (interplanar angle 2°) and occupy trans-positions with respect to the central Re₂O geometry.