Die Reaktionen von Eisen(III)-chlorid mit Trithiazylchlorid. Die Kristallstruktur von [S4N4Cl]+[FeCl4]⊖

Reactions of Iron Trichloride with Trithyazyl Chloride. Crystal Structure of [S₄N₄Cl]⁺[FeCl₄]^? Iron trichloride reacts with (NSCl)₃ yielding S₄N₄[FeCl₄]₂, S₃N₃Cl₂[FeCl₄] or S₄N₄Cl[FeCl₄], depending on the reaction conditions. The i.r. spectra prove the presence of [FeCl₄]^? ions for all three compounds. The ⁵⁷Fe-Mössbauer spectra show a slight quadrupole splitting at 80 K for S₃N₃Cl₂[FeCl₄] (ΔE^Q = 0.42 mm · s^?1) and S₄N₄Cl[FeCl₄] (ΔE^Q = 0.23 mm · s^?1), which indicates a slight deformation of the FeCl₄^? tetrahedra. The crystal structure of S₄N₄Cl[FeCl₄] was determined and refined with X-ray diffraction data (2549 independent reflexions, R = 0.026). S₄N₄Cl[FeCl₄] crystallizes in the triclinic space group P1 with two formula units per unit cell. The lattice constants are a = 712, b = 911, c = 1006 pm, α = 76.5°, β = 83.8° and γ = 80.5°. The structure consists of the so far unknown [S₄N₄Cl]^⊕ cations and slightly deformed FeCl₄^? ions. The [S₄N₄Cl]^⊕ ion consists of a S₄N₄ ring built up of two nearly planar S₃N₂ fragments having a dihedral angle of 136°. The average SN bond length is 157 pm, the SCI bond length 214 pm.     

Crystalline self-assembly into monolayers of folded oligomers at the air-water interface

Insertion of the 1,3-bis(ethynylene)benzene unit as a rigid spacer into a linear alkyl chain, thus separating the two resulting stems by 9 A. induces chain folding at the air-water interface. These folded molecules self-assemble into crystalline monolayers at this interface, with the plane of the folding unit almost perpendicular to the water surface, as determined by synchrotron grazing-incidence X-ray diffraction. Three distinct molecular shapes, of the types U, inverted U, and M, were obtained in the two-dimensional crystalline state, depending upon the number of spacer units, and the number and position of the hydrophilic groups in the molecule. The molecules form ribbons with a higher crystal coherence in the direction of stacking between the molecular ribbons, and a lower coherence along the ribbon direction. A similar molecule, but with a spacer unit that imposes a 5 A separation between alkyl chains, yields the conventional herringbone arrangement.     

Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Limitations and perspectives in the determination of carbofuran with various liquid chromatography-mass spectrometry interfacing systems

Column liquid chromatography with mass spectrometric detection (LC-MS) has been widely accepted as the preferred technique for the identification and quantification of polar and thermally labile compounds at trace levels. Over the last decade many different types of LC-MS interfacing techniques have been used for the determination of carbamate pesticides and especially for the N-methylcarbamate carbofuran. This article addresses the difficulties encountered with the various types of LC-MS interface and discusses recent alternatives for the determination of carbofuran. With thermospray and particle beam interfaces the quantification of carbofuran is affected by both the ion source pressure and temperature, whereas quantification using the recently developed atmospheric pressure ionization interfaces, atmospheric pressure chemical ionization, electrospray, and ionspray, is less dependent on these parameters.     

Systematische untersuchungen über das verhalten von organozinnverbindungen gegenüber flüssigem schwefeldioxid II. Reaktionen von arylstannanen mit flüssigem SO2

The behaviour of tetraarylstannanes, R₄Sn (R = C₆H₅CH₂, C₆H₅, o-, m-, p-CH₃C₆H₄), towards SO₂ under various conditions has now been studied in detail. Compared to aliphatic tetraorganostannanes, the variability of the reaction products is much less, so that in nearly all cases only disulfinates, R₂Sn(O₂SR)₂, are formed. The aromatic tin(IV) mono-, di- and tri-sulfinates are also obtained by metathetical reaction between the corresponding organotin halides and sodium sulfinates. A unique feature of triaryltin chlorides, R₃SnCl (R = C₆H₅, o-, m-, p-CH₃C₆H₄), is their disproportionation in liquid SO₂ leading to disulfinates, R₂Sn(O₂SR)₂, and dichlorides, R₂SnCl₂. (p-CH₃C₆H₄)₂SnCl₂, under more efficient conditions, also accepts SO₂ forming (p-CH₃C₆H₄SO₂)₂SnCl₂. The structural investigations of the newly prepared compounds are carried out on the basis of their IR and ¹H NMR spectra.     

Tetrakis(2-hydroxyphenyl)ethene and derivatives. A structurally preorganized tetradentate ligand system for polymetallic coordination chemistry and catalysis

A topologically unique, conformationally constrained tetradentate ligand system for polymetallic coordination chemistry has been developed: tetrakis(2-hydroxyphenyl)ethene (1a) and substituted derivatives. The design exploits the planarity of the tetraphenylethylene core to impart rigidity to the roughly square oxygen binding array, while maintaining a degree of conformational mobility associated with rotation about the aryl-ethylene carbon-carbon bonds. Tetrakis(2-hydroxyphenyl)ethene derivatives are designed to promote multiple metal bridging over chelating coordination modes. The ligand is synthesized from anisole or 4-tert-butylanisole in four steps via the 2,2'-dimethoxybenzophenone hydrazones 4a,b. The sterically hindered ortho-substituted tetraphenylethylene core is produced in high yield by acid-catalyzed decomposition of the corresponding diaryl diazomethane prepared in situ by oxidation of the hydrazone using nickel peroxide. Deprotection of the methyl ethers using boron tribromide gives tetrakis(2-hydroxyphenyl)ethene (1a), characterized by X-ray crystallography, and tetrakis(5-tert-butyl-2-hydroxyphenyl)ethene (1b). Sterically isolating substituents in the 3-position can be installed via Claisen rearrangement/hydrogenation, providing tetrakis(3-n-propyl-2-hydroxyphenyl)ethene (6) efficiently. To illustrate potential applications of this unprecedented ligand class, two coordination complexes are reported, including tetrakis(2-diethylaluminoxyphenyl)ethene (8), a structurally robust eight-membered-ring aluminum/oxygen crown complex characterized both in solution and in the solid state.     

Determination of mono-ortho substituted chlorobiphenyls by multidimensional gas chromatography and their contribution to TCDD equivalents

The mono-ortho chlorobiphenyls (CBs) 60, 74, 114, 123, 157, 167 and 189 were determined in Aroclor mixtures and aquatic organisms by multidimensional gas chromatography with electron capture detection (MDGC/ECD), using a combination of an Ultra 2 and an FFAP column. MDGC/ECD is recommended as the most suitable technique for direct determination of these CBs, without a liquid chromatographic (LC) pre-separation of mono-ortho CBs from the other CBs. Dependent, to some extent, on the stationary phase used, single-column determinations of these CBs easily yield too high results due to the presence of interferences. The contribution of the mono-ortho CBs studied to the total 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents (TEQs) from CBs in fish is highly dependent on the toxic equivalency factors (TEFs) used and varies between 0.02 and 22%. This contribution is mainly due to CBs 74, 114, 157 and 167 which may easily be determined by taking three heart-cuts and combining them into one MDGC/ECD run. The analytical error is negligible compared with the huge uncertainty of the TEFs. A need for more precise TEFs is emphasized.     

Investigation of the Chemo- and Stereoselectivity of the Ketene-Claisen Rearrangement

A novel type of ketene-Claisen rearrangement in which the precursor of the rearrangement is generated in situ by reaction of optically active allyl thioethers with dichloroketene is described. A characteristic feature of this rearrangement is the excellent chemoselectivity in favor of allyl thioethers vs. allyl ethers, i.e., exclusive chirality transfer of the allylic sulfur moiety is observed with 12, 13 , and 25--27 . The cyclic, optically active allyl thioethers (+)-(R)- 4 and (?)-(S)- 4 and the open-chain allyl thioethers 11--13 rearrange with in situ generated dichloroketene to the optically active thioesters (?)-(S)- 28 , (+)-(R)- 28 , and 31-33 , respectively. A chirality-transfer of > 99% in the cyclic cases (+)-(R)- 4 and (?)-(S)- 4 , and 96--98 % in the open-chain cases 11--13 is observed. Furthermore, the dichloroketene-Claisen rearrangement is characterized by a high asymmetric 1,2-induction. The chiral allylic sulfides 25--27 give the optically active thioesters 36--38 with a 1,2-induction > 99% as determined by NMR-shift experiments.     

Surface-functionalized latex particles as controlling agents for the mineralization of zinc oxide in aqueous medium

Polystyrene latex particles modified at the surface with different hydrophilic functional groups were prepared by miniemulsion polymerization and used as controlling agents in the crystallization of zinc oxide from aqueous medium. The effects of the chemical nature of the surface functionalization and the latex concentration on the crystal growth, morphology, and crystalline structure of the resulting zinc oxide were analyzed. Micro- and submicrosized crystals with a broad variety of morphologies depending on the functionalization were obtained. Among the different latexes studied, the acrylic-acid-derived particles were shown to be a convenient system for further quantitative investigations. In this case, as the additive concentration increases, the length-to-width ratio (aspect ratio) of the crystals decreases systematically. Preferential adsorption of the latex particles onto the fast-growing faces {001} of ZnO is assumed to follow a Langmuir-type isotherm, and interaction of the adsorbed particles with the growth centers will reduce the growth rate in [001]. This leads to a quantitative relationship linking the aspect ratio to the latex concentration at constant diameter and surface chemistry of the latex. The dependence of the aspect ratio on charge density of the latex can also be modeled by an algorithm in which attractive forces between the latex particle and the ZnO surface are balanced against repulsive forces of an osmotic nature. The latter are associated with the confined volume between the crystal and latex particle surfaces.     

Selective and sensitive detection of organic contaminants in water samples by on-line trace enrichment–gas chromatography–mass spectrometry

Liquid chromatographic (LC) type trace enrichment is coupled online with capillary gas chromatography (GC) with mass spectrometric (MS) detection for the analysis of aqueous samples. A volume of 1–10 ml of an aqueous sample is preconcentrated on a trace-enrichment column packed with a polymeric stationary phase. After cleanup with HPLC-grade water the precolumn is dried with nitrogen and subsequently desorbed with ethyl acetate. A fraction of 60 μl is introduced on-line into a diphenyltetramethyldisilazane-deactivated retention gap under partially concurrent solvent evaporation conditions and using an early solvent vapor exit. The analytes are separated and detected by means of GC–MS. The potential of the LC–GC–MS system for monitoring organic pollutants in river and drinking water is studied. Target analysis is carried out with atrazine and simazine as model compounds; the detection limits achieved under full-scan and multiple ion detection conditions are 30 pg and 5 pg, respectively. Identification of unknown compounds (non-target analysis), is demonstrated using a river water sample spiked with 168 pollutants varying in polarity and volatility.