Interfacial shear rheology

This review summarises the interfacial shear rheology in the context of problems occurring during the measuring process. The main areas covered are surfactants, proteins, macromolecules, monolayers, particles or mixed systems at the gas/liquid and liquid/liquid interface. New developments in measuring techniques, in data analysis, modelling and theory will be discussed, while micro-rheological techniques using optical or magnetic tweezers are not in the scope of this contribution.     

Synthesis and characterisation of coating polyurethane cationomers containing fluorine built-in hard urethane segments

Polyurethane cationomers were synthesised in the reaction of 4,4’-methylenebis(phenyl isocyanate) with polyoxyethylene glycol (M?= 2,000) or poly(tetrafluoroethyleneoxide-co-difluoromethylene oxide) α,ω-diisocyanate and N-methyl diethanolamine. Amine segments were built-in to the urethane-isocyanate prepolymer in the reaction with 1-bromobutane or formic acid, and then they were converted to alkylammonium cations. The obtained isocyanate prepolymers were then extended in the aqueous medium that yielded stable aqueous dispersions which were applied on the surfaces of test poly(tetrafluoroethylene) plates. After evaporation of water, the dispersions formed thin polymer coatings. ¹H, ¹³C NMR and IR spectral methods were employed to confirm chemical structures of synthesised cationomers. Based on ¹H NMR and IR spectra, the factors κ and α were calculated, which represented the polarity level of the obtained cationomers. The DSC, wide angle X-ray scattering and atom force microscopy methods were employed for the microstructural assessment of the obtained materials. Changes were discussed in the surface free energy and its components, as calculated independently according to the method suggested by van Oss–Good, in relation to chemical and physical structures of cationomers as well as morphology of coating surfaces obtained from those cationomers. Fluorine incorporated into cationomers (about 30%) contributed to lower surface free energy values, down to about 15 mJ/m². That was caused by gradual weakening of long-range interactions within which the highest share is taken by dispersion interactions.     

Interactions of cyclodextrins with aromatic compounds studied by vibrational circular dichroism spectroscopy

The host/guest complexation between cyclodextrins (CDs) and aromatic compounds was studied by vibrational circular dichroism (VCD) spectroscopy in mid-IR region. Benzoic acid, 4-aminobenzoic acid, and 2,6-naphthalene-dicarboxylic acid acting as the guests with aromatic skeleton, cause the significant changes in VCD patterns of CD, which indicate that the secondary hydroxyl groups of the CDs are involved in the host/guest complexation. In addition, the intensities and dissymmetry factors (deltaA/A) of the VCD bands, which belong to skeletal CD vibrations, depend on the sizes of the guest molecules. Our results indicate that the formation of the CD inclusion complexes can be followed by VCD spectroscopy.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Diffusion anomaly as a function of molecular length of linear molecules: levitation effect

Previous work on monatomic spherical sorbates has shown the existence of an anomalous peak in self-diffusivity (D) when plotted as a function of size of the diffusant. Molecular dynamics studies on linear molecules of different lengths l in zeolite NaY at 140 and 200 K are reported. It is seen that there is a peak in D as a function of l, suggesting that the levitation effect exists for linear molecules, the simplest member of polyatomics. This is confirmed by the lowering of the activation energy for the molecule whose length l exhibits highest D. Related quantities of interest such as the guest-host interaction energy and preexponential factor are discussed.     

Determination of carnitine and acylcarnitines in urine by high-performance liquid chromatography-electrospray ionization ion trap tandem mass spectrometry

A high-performance liquid chromatography-mass spectrometry method has been developed for the simultaneous determination of native carnitine and eight acylcarnitines in urine. The procedure uses a solid-phase extraction on a cation-exchange column and the separation is performed without derivatization within 17 min on a reversed-phase C8 column in the presence of a volatile ion-pairing reagent. The detector was an ion trap mass spectrometer and quantification was carried out in the MS-MS mode. Validation was done for aqueous standards at ranges between 0.75 and 200 micromol/l, depending on the compound. Carnitine was quantified in urine and comparison with a radioenzymatic assay gave a satisfactory correlation (R2 = 0.981). The assay could be successfully applied to the diagnostic of pathological acylcarnitines profile of metabolic disorders in urines of patients suffering from different organic acidurias.     

Characterization of silsesquioxanes by size-exclusion chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Liquid chromatography in combination with spectroscopic methods like matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) or nuclear magnetic resonance (NMR) spectroscopy is a powerful method to characterize silsesquioxanes and silsesquioxane mixtures. As new examples, the formation of silsesquioxyl-substituted silsesquioxanes [(n-octyl)(7)(SiO(1.5))(8)](2)O and [(n-octyl)(7)(SiO(1.5))(8)O](2)[(n-octyl)(6)(SiO(1.5))(8)] as well as the cage rearrangement of octa-[(n-heptyl)silsesquioxane] to larger structures [(n-heptyl)SiO(1.5))](n) up to n=28 are shown.     

Smectic polymorphism in a series of three-ring enaminoketone compounds

Abstract

Liquid crystalline properties of 1 - (4′ - alkoxyphenylamino) - 3 - (4′ - hexyloxyphenyl)-prop-1-en-3-ones, from methoxy to heptadecyloxy, have been examined by optical, DSC, and X-ray methods. The phase diagram for the series exhibits a rich polymorphism of tilted smectic phases, for example, five mesophases were found for the hexyloxy derivative. A characteristic feature of the phase diagram is a gap in the crystal G phase area. For the heptyloxy homologue, a direct crystal H-smectic F phase transition was found; in the case of shorter as well as longer terminal substituents, the phase sequence crystal H–crystal G–smectic F is observed. Calorimetric and X-ray studies revealed the existence of a tricritical point on the crystal G–smectic F transition line.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Disulfide bond decay during matrix-assisted laser desorption/ionization time-of-flight mass spectrometry experiments

In our laboratory, we have been studying the reductive processes that occur during matrix-assisted laser desorption/ionization (MALDI) experiments. Recently, we have finished an analysis of the DHB matrix effect on the azo group in cyclic peptides. However, deep understanding of disulfide bond behaviour during a mass spectrometry (MS) experiment is much more important in proteomics as its reduction can cause serious errors in protein spectra interpretation. Therefore, we have focused on intra- and intermolecular disulfide bonds as well as disulfide bonds connecting cysteine and 2-thio-5-nitrobenzoic acid (TNB, Ellman's reagent modification) in model peptides during MALDI MS measurements. While the reduction was not observed for intra- and intermolecular cysteine-cysteine disulfide bonds, the disulfide connection between cysteine and TNB was always affected. It was proved that TNB and Ellman's reagent can act as a matrix itself. The results obtained enabled us to propose a reaction mechanism model which is able to describe the phenomena observed during the desorption/ionization process of disulfide-containing molecules.